From 3aca4b5734e13dc5a40d238421be8c0f072ee552 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Tue, 23 Sep 2008 22:19:27 +0000 Subject: The AMD dbm690t mainboard uses the it8712f SIO with the default 48MHz clock input. The Asus a8n_e uses the it8712f with a 24MHz clock input. The it8712f early init code was setting a 24MHz input clock(to support the a8n_e). Since 48Mhz is the default I added a function to set 24MHz input clock to the a8n_e. Signed-off-by: Marc Jones Acked-by: Rudolf Marek git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/asus/a8n_e/cache_as_ram_auto.c | 1 + src/superio/ite/it8712f/it8712f_early_serial.c | 38 ++++++++++++++++++++------ 2 files changed, 31 insertions(+), 8 deletions(-) diff --git a/src/mainboard/asus/a8n_e/cache_as_ram_auto.c b/src/mainboard/asus/a8n_e/cache_as_ram_auto.c index 41af6ca528..5f8e93ba4e 100644 --- a/src/mainboard/asus/a8n_e/cache_as_ram_auto.c +++ b/src/mainboard/asus/a8n_e/cache_as_ram_auto.c @@ -221,6 +221,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } + it8712f_24mhz_clkin(); it8712f_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); diff --git a/src/superio/ite/it8712f/it8712f_early_serial.c b/src/superio/ite/it8712f/it8712f_early_serial.c index 7839732787..dd84245dc4 100644 --- a/src/superio/ite/it8712f/it8712f_early_serial.c +++ b/src/superio/ite/it8712f/it8712f_early_serial.c @@ -45,10 +45,10 @@ static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value) outb(value, SIO_DATA); } -/* Enable the peripheral devices on the IT8712F Super I/O chip. */ -static void it8712f_enable_serial(device_t dev, unsigned iobase) + +static void it8712f_enter_conf(void) { - /* (1) Enter the configuration state (MB PnP mode). */ + /* Enter the configuration state (MB PnP mode). */ /* Perform MB PnP setup to put the SIO chip at 0x2e. */ /* Base address 0x2e: 0x87 0x01 0x55 0x55. */ @@ -57,6 +57,32 @@ static void it8712f_enable_serial(device_t dev, unsigned iobase) outb(0x01, IT8712F_CONFIGURATION_PORT); outb(0x55, IT8712F_CONFIGURATION_PORT); outb(0x55, IT8712F_CONFIGURATION_PORT); +} + +static void it8712f_exit_conf(void) +{ + /* Exit the configuration state (MB PnP mode). */ + it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); +} + + +static void it8712f_24mhz_clkin(void) +{ + it8712f_enter_conf(); + + /* Select 24MHz CLKIN (48MHZ default)*/ + it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x1); + + it8712f_exit_conf(); + +} + +/* Enable the peripheral devices on the IT8712F Super I/O chip. */ +static void it8712f_enable_serial(device_t dev, unsigned iobase) +{ + + /* (1) Enter the configuration state (MB PnP mode). */ + it8712f_enter_conf(); /* (2) Modify the data of configuration registers. */ @@ -69,13 +95,9 @@ static void it8712f_enable_serial(device_t dev, unsigned iobase) it8712f_sio_write(IT8712F_SP1, 0x30, 0x1); /* Serial port 1 */ it8712f_sio_write(IT8712F_SP2, 0x30, 0x1); /* Serial port 2 */ - /* Select 24MHz CLKIN (set bit 0). */ - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x01); - /* Clear software suspend mode (clear bit 0). TODO: Needed? */ /* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_SWSUSP, 0x00); */ /* (3) Exit the configuration state (MB PnP mode). */ - it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02); + it8712f_exit_conf(); } - -- cgit v1.2.3