From 3d7020e0c48dcf5a61e68c284759c108907addaf Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Sun, 9 Aug 2015 14:45:02 -0500 Subject: glados: make EC_SCI_L work In order for the EC_SCI_L to work the GPE0 route needs to be set along w/ the GPE event for the EC. As the GPE0 route is dynamic the EC_SCI_GPI needs to be set along with the route so everything lines up. In this case, the GPE0 route is set to the defaults such that GPP_C, GPP_D, and GPP_E are routed to GPE0 block 0, 1, and 2, respectively. This works out for glados because the EC_SCI_L is connected to GPP_E16. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados. The 'acpi' interrupt in /proc/interrupts is incrementing as well as /sys/firmware/acpi/interrupts/gpe50. Original-Change-Id: I71fc4bec124f3ac87453a099412154e67aba6280 Original-Signed-off-by: Aaron Durbin Original-Reviewed-on: https://chromium-review.googlesource.com/292011 Original-Reviewed-by: Duncan Laurie Change-Id: Idbb6d29364655537abc9ae6f012b3abb38edf138 Signed-off-by: Aaron Durbin Reviewed-on: http://review.coreboot.org/11210 Tested-by: build bot (Jenkins) --- src/mainboard/google/glados/devicetree.cb | 8 ++++++++ src/mainboard/google/glados/ec.h | 6 ++++-- src/mainboard/google/glados/gpio.h | 2 +- 3 files changed, 13 insertions(+), 3 deletions(-) diff --git a/src/mainboard/google/glados/devicetree.cb b/src/mainboard/google/glados/devicetree.cb index 2e1cae75a8..9bb065de17 100644 --- a/src/mainboard/google/glados/devicetree.cb +++ b/src/mainboard/google/glados/devicetree.cb @@ -49,6 +49,14 @@ chip soc/intel/skylake register "PttSwitch" = "0" register "SkipExtGfxScan" = "1" + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + # Embedded Controller host command window register "gen1_dec" = "0x00fc0801" diff --git a/src/mainboard/google/glados/ec.h b/src/mainboard/google/glados/ec.h index f42e4c725a..d43b57ca45 100644 --- a/src/mainboard/google/glados/ec.h +++ b/src/mainboard/google/glados/ec.h @@ -24,8 +24,10 @@ #include #include -/* GPP_E16 is EC_SCI_L */ -#define EC_SCI_GPI 16 /* TODO: Update this */ +/* GPP_E16 is EC_SCI_L, however the EC_SCI_GPI needs to be a bit + * number relative to the GPE0 block. GPP_E is routed as the dword 2 + * in the GPE0 block. Therefore, 16 + 2 * 32 = 80. */ +#define EC_SCI_GPI 80 #define EC_SMI_GPI GPP_E15 #define MAINBOARD_EC_SCI_EVENTS \ diff --git a/src/mainboard/google/glados/gpio.h b/src/mainboard/google/glados/gpio.h index ebbee20233..c7cd5ae0c5 100644 --- a/src/mainboard/google/glados/gpio.h +++ b/src/mainboard/google/glados/gpio.h @@ -135,7 +135,7 @@ static const struct pad_config gpio_table[] = { /* DDPB_HPD0 */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1), /* DDPC_HPD1 */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), /* DDPD_HPD2 */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES), /* EC_SMI_L */ -/* DDPE_HPD3 */ PAD_CFG_NF(GPP_E16, NONE, DEEP, NF1), +/* DDPE_HPD3 */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, DEEP, YES), /* EC_SCI_L */ /* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1), /* DDPB_CTRLCLK */ /* GPP_E18 */ /* DDPB_CTRLDATA */ /* GPP_E19 */ -- cgit v1.2.3