From 5173bb7d9d0d16255941b56d5cc722141d661baa Mon Sep 17 00:00:00 2001 From: Timothy Pearson Date: Sun, 2 Aug 2015 21:31:48 -0500 Subject: cpu/amd/family_10h-family_15h: Fix incorrect revision detection The revision detection code for AMD Family 10h/15h was modified to use a 64-bit value instead of 32-bit in order to accomodate additional processor revisions. The FIDVID code was not updated at that point, leading to incorrect revision use during FIDVID. Change-Id: I7a881a94d62ed455415f9dfc887fd698ac919429 Signed-off-by: Timothy Pearson Reviewed-on: http://review.coreboot.org/12026 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand Reviewed-by: Alexandru Gagniuc --- src/cpu/amd/family_10h-family_15h/fidvid.c | 32 +++++++++++++++--------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/src/cpu/amd/family_10h-family_15h/fidvid.c b/src/cpu/amd/family_10h-family_15h/fidvid.c index 8a006cbbb3..3619a9cc2d 100644 --- a/src/cpu/amd/family_10h-family_15h/fidvid.c +++ b/src/cpu/amd/family_10h-family_15h/fidvid.c @@ -371,9 +371,9 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev) pci_write_config32(dev, 0xd8, dtemp); } -static u32 nb_clk_did(int node, u32 cpuRev,u8 procPkg) { - u8 link0isGen3 = 0; - u8 offset; +static u32 nb_clk_did(uint8_t node, uint64_t cpuRev, uint8_t procPkg) { + uint8_t link0isGen3 = 0; + uint8_t offset; if (AMD_CpuFindCapability(node, 0, &offset)) { link0isGen3 = (AMD_checkLinkType(node, 0, offset) & HTPHY_LINKTYPE_HT3 ); } @@ -442,7 +442,7 @@ static u32 power_up_down(int node, u8 procPkg) { return dword; } -static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) { +static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t procPkg) { device_t dev = NODE_PCI(node, 3); /* Program fields in Clock Power/Control register0 (F3xD4) */ @@ -456,7 +456,7 @@ static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) { * ClkRampHystCtl=HW default * ClkRampHystSel=1111b */ - u32 dword= pci_read_config32(dev, 0xd4); + uint32_t dword= pci_read_config32(dev, 0xd4); dword &= CPTC0_MASK; dword |= NB_CLKDID_ALL | LNK_PLL_LOCK | CLK_RAMP_HYST_SEL_VAL; dword |= (nb_clk_did(node,cpuRev,procPkg) << NB_CLKDID_SHIFT); @@ -467,9 +467,9 @@ static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) { } -static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) { +static void config_power_ctrl_misc_reg(device_t dev, uint64_t cpuRev, uint8_t procPkg) { /* check PVI/SVI */ - u32 dword = pci_read_config32(dev, 0xa0); + uint32_t dword = pci_read_config32(dev, 0xa0); /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xA0[VSSlamVidMod] */ /* PllLockTime and PsiVidEn set in ruleset in defaults.h */ @@ -500,14 +500,14 @@ static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) { pci_write_config32(dev, 0xa0, dword); } -static void config_nb_syn_ptr_adj(device_t dev, u32 cpuRev) { +static void config_nb_syn_ptr_adj(device_t dev, uint64_t cpuRev) { /* Note the following settings are additional from the ported * function setFidVidRegs() */ /* adjust FIFO between nb and core clocks to max allowed values (min latency) */ - u32 nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK; - u8 nbSynPtrAdj; + uint32_t nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK; + uint8_t nbSynPtrAdj; if ((cpuRev & (AMD_DR_Bx | AMD_DA_Cx | AMD_FAM15_ALL) ) || ((cpuRev & AMD_RB_C3) && (nbPstate != 0))) { nbSynPtrAdj = 5; @@ -515,14 +515,14 @@ static void config_nb_syn_ptr_adj(device_t dev, u32 cpuRev) { nbSynPtrAdj = 6; } - u32 dword = pci_read_config32(dev, 0xdc); + uint32_t dword = pci_read_config32(dev, 0xdc); dword &= ~NB_SYN_PTR_ADJ_MASK; dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS; /* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */ pci_write_config32(dev, 0xdc, dword); } -static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg) { +static void config_acpi_pwr_state_ctrl_regs(device_t dev, uint64_t cpuRev, uint8_t procPkg) { if (is_fam15h()) { /* Family 15h BKDG Rev. 3.14 D18F3x80 recommended settings */ pci_write_config32(dev, 0x80, 0xe20be281); @@ -531,8 +531,8 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg pci_write_config32(dev, 0x84, 0x01e200e2); } else { /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ - u32 dword; - u32 c1= 1; + uint32_t dword; + uint32_t c1= 1; if (cpuRev & (AMD_DR_Bx)) { // will coreboot ever enable cache scrubbing ? // if it does, will it be enough to check the current state @@ -565,7 +565,7 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg * which is easier */ - u32 smaf001 = 0xE6; + uint32_t smaf001 = 0xE6; if (cpuRev & AMD_DR_Bx ) { smaf001 = 0xA6; } else { @@ -575,7 +575,7 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg } #endif } - u32 fidvidChange = 0; + uint32_t fidvidChange = 0; if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX)) || (cpuRev & AMD_RB_C3) ) { fidvidChange=0x0B; -- cgit v1.2.3