From 6dfbb593077ea3edb9162431c2380a268d35fc4a Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Thu, 15 Mar 2018 15:45:44 -0700 Subject: soc/amd/stoneyridge/southbridge.c: Remove configure_stoneyridge_uart The GPIO programming of configure_stoneyridge_UART() can be done by the early GPIO table, AOAC enabling was already removed. So configure_stoneyridge_uart() became redundant. Remove procedure configure_stoneyridge_uart(). BUG=b:74258015 TEST=Build and boot kahlee, observing serial output does not changes from previous serial output. Change-Id: Ie67051d7b90fa294090f6bfc518c6c074d98cc98 Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/25192 Reviewed-by: Garrett Kirkendall Reviewed-by: Martin Roth Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) --- src/mainboard/amd/gardenia/gpio.c | 10 ++++++++++ src/mainboard/google/kahlee/variants/kahlee/gpio.c | 6 ++++++ src/soc/amd/stoneyridge/bootblock/bootblock.c | 2 -- src/soc/amd/stoneyridge/include/soc/southbridge.h | 1 - src/soc/amd/stoneyridge/southbridge.c | 13 +------------ 5 files changed, 17 insertions(+), 15 deletions(-) diff --git a/src/mainboard/amd/gardenia/gpio.c b/src/mainboard/amd/gardenia/gpio.c index 2d73ee08d2..c274a76bc6 100644 --- a/src/mainboard/amd/gardenia/gpio.c +++ b/src/mainboard/amd/gardenia/gpio.c @@ -35,6 +35,16 @@ const struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = { {GPIO_116, Function1, FCH_GPIO_PULL_DOWN_ENABLE | INPUT }, /* SD power */ {GPIO_119, Function2, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + /* GPIO_136 - UART0_FCH_RX_DEBUG_RX */ + {GPIO_136, Function0, INPUT }, + /* GPIO_137 - UART0_FCH_DEBUG_RTS */ + {GPIO_137, Function0, INPUT }, + /* GPIO_138 - UART0_FCH_TX_DEBUG_RX */ + {GPIO_138, Function0, INPUT }, + /* GPIO_142 - UART1_FCH_RTS */ + {GPIO_142, Function0, INPUT }, + /* GPIO_143 - UART1_FCH_TX */ + {GPIO_143, Function0, INPUT }, }; const struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { diff --git a/src/mainboard/google/kahlee/variants/kahlee/gpio.c b/src/mainboard/google/kahlee/variants/kahlee/gpio.c index d1cc017c93..2f40546427 100644 --- a/src/mainboard/google/kahlee/variants/kahlee/gpio.c +++ b/src/mainboard/google/kahlee/variants/kahlee/gpio.c @@ -53,6 +53,12 @@ const struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = { /* BD_ID1 */ {GPIO_135, Function1, INPUT }, + /* GPIO_136 - UART_FCH_RX_DEBUG_RX */ + {GPIO_136, Function0, INPUT }, + + /* GPIO_138 - UART_FCH_TX_DEBUG_RX */ + {GPIO_138, Function0, INPUT }, + /* TPM_SERIRQ# */ {GPIO_139, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, diff --git a/src/soc/amd/stoneyridge/bootblock/bootblock.c b/src/soc/amd/stoneyridge/bootblock/bootblock.c index 3eff5eb0dc..fafaf079ce 100644 --- a/src/soc/amd/stoneyridge/bootblock/bootblock.c +++ b/src/soc/amd/stoneyridge/bootblock/bootblock.c @@ -75,8 +75,6 @@ void bootblock_soc_early_init(void) bootblock_fch_early_init(); post_code(0x90); - if (CONFIG_STONEYRIDGE_UART) - configure_stoneyridge_uart(); } /* diff --git a/src/soc/amd/stoneyridge/include/soc/southbridge.h b/src/soc/amd/stoneyridge/include/soc/southbridge.h index 6dea0c6864..bdcb38fa8d 100644 --- a/src/soc/amd/stoneyridge/include/soc/southbridge.h +++ b/src/soc/amd/stoneyridge/include/soc/southbridge.h @@ -353,7 +353,6 @@ struct stoneyridge_aoac { void enable_aoac_devices(void); void sb_enable_rom(void); -void configure_stoneyridge_uart(void); void configure_stoneyridge_i2c(void); void sb_clk_output_48Mhz(void); void sb_disable_4dw_burst(void); diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c index cf059a46b2..55e39569d0 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/southbridge.c @@ -36,9 +36,7 @@ * Table of devices that need their AOAC registers enabled and waited * upon (usually about .55 milliseconds). Instead of individual delays * waiting for each device to become available, a single delay will be - * executed at configure_stoneyridge_uart(). All other devices need only - * to verify if their AOAC is already enabled, and do a minimal delay - * if needed. + * executed. */ const static struct stoneyridge_aoac aoac_devs[] = { { (FCH_AOAC_D3_CONTROL_UART0 + CONFIG_UART_FOR_CONSOLE * 2), @@ -331,15 +329,6 @@ void enable_aoac_devices(void) } while (!status); } -void configure_stoneyridge_uart(void) -{ - /* Set the GPIO mux to UART */ - write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0); - write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0); - write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0); - write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0); -} - void sb_pci_port80(void) { u8 byte; -- cgit v1.2.3