From 6fa724292f05462ddb8824c73c2958f36c19aca7 Mon Sep 17 00:00:00 2001 From: Iru Cai Date: Tue, 8 Sep 2020 19:50:55 +0800 Subject: mb/hp: Add HP EliteBook Folio 9480m The code is based on autoport, with necessary modifications. This laptop uses SMSC MEC1322 embedded controller, but the EC interface is the same as the EliteBook laptops of previous generations that use KBC1126 EC. Thanks to persmule for providing the laptop and pointing out the flashing method for it. Change-Id: I2328c43cbb1f488aa1d0ddd9116814d971e5d8ae Signed-off-by: Iru Cai --- Documentation/mainboard/hp/9480m.md | 132 +++++++++++++++++++++++++ Documentation/mainboard/index.md | 1 + src/mainboard/hp/folio_9480m/Kconfig | 47 +++++++++ src/mainboard/hp/folio_9480m/Kconfig.name | 2 + src/mainboard/hp/folio_9480m/Makefile.inc | 3 + src/mainboard/hp/folio_9480m/acpi/ec.asl | 3 + src/mainboard/hp/folio_9480m/acpi/platform.asl | 14 +++ src/mainboard/hp/folio_9480m/acpi/superio.asl | 3 + src/mainboard/hp/folio_9480m/acpi_tables.c | 14 +++ src/mainboard/hp/folio_9480m/board_info.txt | 7 ++ src/mainboard/hp/folio_9480m/bootblock.c | 15 +++ src/mainboard/hp/folio_9480m/devicetree.cb | 80 +++++++++++++++ src/mainboard/hp/folio_9480m/dsdt.asl | 27 +++++ src/mainboard/hp/folio_9480m/gma-mainboard.ads | 20 ++++ src/mainboard/hp/folio_9480m/gpio.c | 105 ++++++++++++++++++++ src/mainboard/hp/folio_9480m/hda_verb.c | 26 +++++ src/mainboard/hp/folio_9480m/mainboard.c | 14 +++ src/mainboard/hp/folio_9480m/romstage.c | 47 +++++++++ 18 files changed, 560 insertions(+) create mode 100644 Documentation/mainboard/hp/9480m.md create mode 100644 src/mainboard/hp/folio_9480m/Kconfig create mode 100644 src/mainboard/hp/folio_9480m/Kconfig.name create mode 100644 src/mainboard/hp/folio_9480m/Makefile.inc create mode 100644 src/mainboard/hp/folio_9480m/acpi/ec.asl create mode 100644 src/mainboard/hp/folio_9480m/acpi/platform.asl create mode 100644 src/mainboard/hp/folio_9480m/acpi/superio.asl create mode 100644 src/mainboard/hp/folio_9480m/acpi_tables.c create mode 100644 src/mainboard/hp/folio_9480m/board_info.txt create mode 100644 src/mainboard/hp/folio_9480m/bootblock.c create mode 100644 src/mainboard/hp/folio_9480m/devicetree.cb create mode 100644 src/mainboard/hp/folio_9480m/dsdt.asl create mode 100644 src/mainboard/hp/folio_9480m/gma-mainboard.ads create mode 100644 src/mainboard/hp/folio_9480m/gpio.c create mode 100644 src/mainboard/hp/folio_9480m/hda_verb.c create mode 100644 src/mainboard/hp/folio_9480m/mainboard.c create mode 100644 src/mainboard/hp/folio_9480m/romstage.c diff --git a/Documentation/mainboard/hp/9480m.md b/Documentation/mainboard/hp/9480m.md new file mode 100644 index 0000000000..3a50963199 --- /dev/null +++ b/Documentation/mainboard/hp/9480m.md @@ -0,0 +1,132 @@ +# HP EliteBook Folio 9480m + +This page is about the notebook [HP EliteBook Folio 9480m]. + +## Release status + +HP EliteBook Folio 9480m was released in 2014 and is now end of life. +It can be bought from a secondhand market like Taobao or eBay. + +## Required proprietary blobs + +The following blobs are required to operate the hardware: + +1. EC firmware +2. Intel ME firmware +3. mrc.bin + +HP EliteBook Folio 9480m uses SMSC MEC1322 as its embedded controller. +The EC firmware is stored in the flash chip, but we don't need to touch it +or use it in the coreboot build process. + +Intel ME firmware is in the flash chip. It is not needed when building coreboot. + +The Haswell memory reference code binary is needed when building coreboot. +Please see [mrc.bin](../../northbridge/intel/haswell/mrc.bin). + +## Programming + +Before flashing, remove the battery and the hard drive cover according to the +[Maintenance and Service Guide] of this laptop. + +(TBD: pictures needed) + +HP EliteBook Folio 9480m has two flash chips, a 16MB system flash, and a 2MB +private flash. To install coreboot, we need to program both flash chips. +Read [HP Sure Start] for detailed information. + +To access the system flash. We need to connect the AC adapter to the machine, +then clip on the flash chip with an SOIC-8 clip. An [STM32-based flash programmer] +made with an STM32 develop board is tested to work. + +To access the private flash chip. You can use a ch341a based flash programmer and +flash the chip with the AC adapter disconnected. + +Before flashing coreboot, we need to do the following: + +1. Erase the private flash to disable the IFD protection +2. Modify the IFD to shrink the BIOS region, so that we'll not use or override + the protected bootblock and PEI region, as well as the EC firmware + +It works with the flash chip size set to 12MB in coreboot configuration, and the +following flash layout in the modified IFD: + + 00000000:00000fff fd + 00600000:00bfffff bios + 00003000:005fffff me + 00001000:00002fff gbe + +Write the above layout in a file, and use ifdtool to modify the IFD of a flash image. +Suppose the above layout file is ``layout.txt`` and the content of the system flash +is in ``factory-sys.rom``, run: + + ifdtool -n layout.txt factory-sys.rom + +Then a flash image with a new IFD will be in ``factory-sys.rom.new``. + +Flash the IFD of the system flash: + + flashrom -p --ifd -i fd -w factory-sys.rom.new + +Then flash the coreboot image: + + # first extend the 12M coreboot.rom to 16M + fallocate -l 16M build/coreboot.rom + flashrom -p --ifd -i bios -w build/coreboot.rom + +## Debugging + +The board can be debugged with EHCI debug. The EHCI debug port is USB port on the left. + +## Test status + +(TBD...) + +### Laptop specification + +- CPU: i5-4310U +- Memory: two slots DDR3L +- Flash cache? +- HDD +- M.2 SSD +- Audio and video (speaker, microphone, webcam) +- Ethernet +- WLAN +- WWAN +- SD card +- DisplayPort +- dock +- USB +- VGA +- keyboard and touchpad +- TPM +- fingerprint reader +- Smart Card reader +- OS: GNU/Linux + +### Working + +- libgfxinit +- SeaBIOS payload +- SATA and M.2 SATA disk +- EC firmware version XXX from OEM firmware version XXX (what version?) +- mrc.bin version 1.6.1 Build 2 + +## Technology + +```eval_rst ++------------------+-----------------------------+ +| CPU | Intel Haswell-ULT | ++------------------+-----------------------------+ +| PCH | Intel Lynx Point Low Power | ++------------------+-----------------------------+ +| EC | SMSC MEC1322 | ++------------------+-----------------------------+ +| Coprocessor | Intel Management Engine | ++------------------+-----------------------------+ +``` + +[HP EliteBook Folio 9480m]: https://support.hp.com/us-en/product/hp-elitebook-folio-9480m-notebook-pc/7089926 +[Maintenance and Service Guide]: http://h10032.www1.hp.com/ctg/Manual/c05228980 +[STM32-based flash programmer]: https://github.com/dword1511/stm32-vserprog +[HP Sure Start]: hp_sure_start.md diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md index 335eae237c..bc3f0c67e3 100644 --- a/Documentation/mainboard/index.md +++ b/Documentation/mainboard/index.md @@ -64,6 +64,7 @@ The boards in this section are not real mainboards, but emulators. - [HP Sure Start](hp/hp_sure_start.md) - [EliteBook 2560p](hp/2560p.md) - [EliteBook 8760w](hp/8760w.md) +- [EliteBook Folio 9480m](hp/9480m.md) ## Intel diff --git a/src/mainboard/hp/folio_9480m/Kconfig b/src/mainboard/hp/folio_9480m/Kconfig new file mode 100644 index 0000000000..78e7cc51ac --- /dev/null +++ b/src/mainboard/hp/folio_9480m/Kconfig @@ -0,0 +1,47 @@ +if BOARD_HP_FOLIO_9480M + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select EC_HP_KBC1126 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_INT15 + select INTEL_LYNXPOINT_LP + select MAINBOARD_HAS_LIBGFXINIT + select MAINBOARD_HAS_LPC_TPM + select MAINBOARD_HAS_TPM1 + select NORTHBRIDGE_INTEL_HASWELL + select SERIRQ_CONTINUOUS_MODE + select SOUTHBRIDGE_INTEL_LYNXPOINT + select SYSTEM_TYPE_LAPTOP + +config MAINBOARD_DIR + string + default "hp/folio_9480m" + +config MAINBOARD_PART_NUMBER + string + default "HP EliteBook Folio 9480m" + +config VGA_BIOS_FILE + string + default "pci8086,0a16.rom" + +config VGA_BIOS_ID + string + default "8086,0a16" + +config USBDEBUG_HCD_INDEX + int + default 1 + +config EC_HP_KBC1126_ECFW_IN_CBFS + bool + default n + +config EC_HP_KBC1126_GPE + hex + default 0x6 + +endif diff --git a/src/mainboard/hp/folio_9480m/Kconfig.name b/src/mainboard/hp/folio_9480m/Kconfig.name new file mode 100644 index 0000000000..67c671d4c2 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_HP_FOLIO_9480M + bool "EliteBook Folio 9480m" diff --git a/src/mainboard/hp/folio_9480m/Makefile.inc b/src/mainboard/hp/folio_9480m/Makefile.inc new file mode 100644 index 0000000000..fa23791fc1 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/Makefile.inc @@ -0,0 +1,3 @@ +bootblock-y += bootblock.c +romstage-y += gpio.c +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/hp/folio_9480m/acpi/ec.asl b/src/mainboard/hp/folio_9480m/acpi/ec.asl new file mode 100644 index 0000000000..baa17a4181 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/acpi/ec.asl @@ -0,0 +1,3 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include diff --git a/src/mainboard/hp/folio_9480m/acpi/platform.asl b/src/mainboard/hp/folio_9480m/acpi/platform.asl new file mode 100644 index 0000000000..8023ae826c --- /dev/null +++ b/src/mainboard/hp/folio_9480m/acpi/platform.asl @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +Method(_WAK,1) +{ + \_SB.PCI0.LPCB.EC0.ACPI = 1 + \_SB.PCI0.LPCB.EC0.SLPT = 0 + + Return(Package(){0,0}) +} + +Method(_PTS,1) +{ + \_SB.PCI0.LPCB.EC0.SLPT = Arg0 +} diff --git a/src/mainboard/hp/folio_9480m/acpi/superio.asl b/src/mainboard/hp/folio_9480m/acpi/superio.asl new file mode 100644 index 0000000000..55b1db5b11 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/acpi/superio.asl @@ -0,0 +1,3 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include diff --git a/src/mainboard/hp/folio_9480m/acpi_tables.c b/src/mainboard/hp/folio_9480m/acpi_tables.c new file mode 100644 index 0000000000..00963e10b0 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/acpi_tables.c @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +void acpi_create_gnvs(struct global_nvs *gnvs) +{ + gnvs->lids = 1; + + /* Temperature at which OS will shutdown */ + gnvs->tcrt = 100; + /* Temperature at which OS will throttle CPU */ + gnvs->tpsv = 90; +} diff --git a/src/mainboard/hp/folio_9480m/board_info.txt b/src/mainboard/hp/folio_9480m/board_info.txt new file mode 100644 index 0000000000..921d4035d2 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/board_info.txt @@ -0,0 +1,7 @@ +Category: laptop +Board URL: https://support.hp.com/us-en/product/hp-elitebook-folio-9480m-notebook-pc/7089926 +ROM protocol: SPI +ROM package: SOIC-8 +ROM socketed: n +Flashrom support: n +Release year: 2014 diff --git a/src/mainboard/hp/folio_9480m/bootblock.c b/src/mainboard/hp/folio_9480m/bootblock.c new file mode 100644 index 0000000000..a51943c3dd --- /dev/null +++ b/src/mainboard/hp/folio_9480m/bootblock.c @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +void mainboard_config_superio(void) +{ + kbc1126_enter_conf(); + kbc1126_mailbox_init(); + kbc1126_kbc_init(); + kbc1126_ec_init(); + kbc1126_pm1_init(); + kbc1126_exit_conf(); + // kbc1126_disable4e(); +} diff --git a/src/mainboard/hp/folio_9480m/devicetree.cb b/src/mainboard/hp/folio_9480m/devicetree.cb new file mode 100644 index 0000000000..5889104101 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/devicetree.cb @@ -0,0 +1,80 @@ +chip northbridge/intel/haswell + register "dq_pins_interleaved" = "true" + register "ec_present" = "true" + register "gfx" = "GMA_STATIC_DISPLAYS(0)" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_panel_power_backlight_off_delay" = "1" + register "gpu_panel_power_backlight_on_delay" = "1" + register "gpu_panel_power_cycle_delay" = "6" + register "gpu_panel_power_down_delay" = "500" + register "gpu_panel_power_up_delay" = "2000" + register "gpu_pch_backlight_pwm_hz" = "200" + register "usb_xhci_on_resume" = "true" + device cpu_cluster 0 on + chip cpu/intel/haswell + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x103c 0x22da inherit + device pci 00.0 on end # Host bridge + device pci 02.0 on end # Internal graphics VGA controller + device pci 03.0 on end # Mini-HD audio + + chip southbridge/intel/lynxpoint # Intel Series 8 Lynx Point PCH + register "docking_supported" = "0" + register "gen1_dec" = "0x007c0201" + register "gen2_dec" = "0x000c0101" + register "gen4_dec" = "0x000402e9" + register "sata_ahci" = "1" + # SATA(1), M.2(3) + register "sata_port_map" = "0xa" + device pci 14.0 on end # xHCI Controller + device pci 15.0 off end # Serial I/O DMA + device pci 15.1 off end # I2C0 + device pci 15.2 off end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 off end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2, Realtek Card Reader + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 on end # PCIe Port #4, WLAN + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1f.0 on # LPC bridge + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + # This laptop uses MEC1322, but it has the same interface + # as the KBC1126 laptops + chip ec/hp/kbc1126 + register "ec_data_port" = "0x62" + register "ec_cmd_port" = "0x66" + register "ec_ctrl_reg" = "0x81" + register "ec_fan_ctrl_value" = "0x6b" + device pnp ff.1 off end + end + end + device pci 1f.2 on end # SATA Controller (AHCI) + device pci 1f.3 on end # SMBus + device pci 1f.6 off end # Thermal + end + end +end diff --git a/src/mainboard/hp/folio_9480m/dsdt.asl b/src/mainboard/hp/folio_9480m/dsdt.asl new file mode 100644 index 0000000000..eef373a68b --- /dev/null +++ b/src/mainboard/hp/folio_9480m/dsdt.asl @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, /* DSDT revision: ACPI 2.0 and up */ + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20141018 /* OEM revision */ +) +{ + #include "acpi/platform.asl" + #include + #include + /* global NVS and variables. */ + #include + #include + + Device (\_SB.PCI0) + { + #include + #include + #include + } +} diff --git a/src/mainboard/hp/folio_9480m/gma-mainboard.ads b/src/mainboard/hp/folio_9480m/gma-mainboard.ads new file mode 100644 index 0000000000..8eea59a449 --- /dev/null +++ b/src/mainboard/hp/folio_9480m/gma-mainboard.ads @@ -0,0 +1,20 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + -- FIXME: check this + ports : constant Port_List := + (DP1, + DP2, + HDMI1, + HDMI2, + eDP, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/hp/folio_9480m/gpio.c b/src/mainboard/hp/folio_9480m/gpio.c new file mode 100644 index 0000000000..3ad465a78f --- /dev/null +++ b/src/mainboard/hp/folio_9480m/gpio.c @@ -0,0 +1,105 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const struct pch_lp_gpio_map mainboard_gpio_map[] = { + [0] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [1] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [2] = LP_GPIO_OUT_LOW, + [3] = LP_GPIO_OUT_HIGH, + [4] = LP_GPIO_OUT_HIGH, + [5] = LP_GPIO_OUT_HIGH, + [6] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [7] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [8] = LP_GPIO_OUT_HIGH, + [9] = LP_GPIO_OUT_HIGH, + [10] = LP_GPIO_OUT_HIGH, + [11] = LP_GPIO_OUT_HIGH, + [12] = LP_GPIO_NATIVE, + [13] = LP_GPIO_OUT_HIGH, + [14] = LP_GPIO_OUT_HIGH, + [15] = LP_GPIO_OUT_HIGH, + [16] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, .route = GPIO_ROUTE_SMI }, + [17] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [18] = LP_GPIO_OUT_HIGH, + [19] = LP_GPIO_NATIVE, + [20] = LP_GPIO_NATIVE, + [21] = LP_GPIO_NATIVE, + [22] = LP_GPIO_OUT_HIGH, + [23] = LP_GPIO_OUT_HIGH, + [24] = LP_GPIO_OUT_HIGH, + [25] = LP_GPIO_OUT_HIGH, + [26] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [27] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [28] = LP_GPIO_OUT_HIGH, + [29] = LP_GPIO_OUT_HIGH, + [30] = LP_GPIO_NATIVE, + [31] = LP_GPIO_NATIVE, + [32] = LP_GPIO_NATIVE, + [33] = LP_GPIO_NATIVE, + [34] = LP_GPIO_OUT_HIGH, + [35] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [36] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, .route = GPIO_ROUTE_SMI }, + [37] = LP_GPIO_NATIVE, + [38] = LP_GPIO_NATIVE, + [39] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL, + .route = GPIO_ROUTE_SMI }, + [40] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL, + .route = GPIO_ROUTE_SMI }, + [41] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [42] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [43] = LP_GPIO_OUT_HIGH, + [44] = LP_GPIO_OUT_LOW, + [45] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_INVERT | GPIO_IRQ_LEVEL }, + [46] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [47] = LP_GPIO_OUT_HIGH, + [48] = LP_GPIO_OUT_LOW, + [49] = LP_GPIO_OUT_HIGH, + [50] = LP_GPIO_OUT_HIGH, + [51] = LP_GPIO_OUT_HIGH, + [52] = LP_GPIO_OUT_HIGH, + [53] = LP_GPIO_OUT_HIGH, + [54] = LP_GPIO_OUT_LOW, + [55] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, + .pirq = GPIO_PIRQ_APIC_ROUTE }, + [56] = LP_GPIO_OUT_HIGH, + [57] = LP_GPIO_OUT_LOW, + [58] = LP_GPIO_OUT_HIGH, + [59] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [60] = LP_GPIO_OUT_HIGH, + [61] = LP_GPIO_OUT_LOW, + [62] = LP_GPIO_NATIVE, + [63] = LP_GPIO_NATIVE, + [64] = LP_GPIO_OUT_HIGH, + [65] = LP_GPIO_OUT_LOW, + [66] = LP_GPIO_OUT_HIGH, + [67] = LP_GPIO_OUT_HIGH, + [68] = LP_GPIO_OUT_HIGH, + [69] = LP_GPIO_OUT_HIGH, + [70] = LP_GPIO_OUT_LOW, + [71] = LP_GPIO_NATIVE, + [72] = LP_GPIO_NATIVE, + [73] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [74] = LP_GPIO_NATIVE, + [75] = LP_GPIO_NATIVE, + [76] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [77] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [78] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL, .route = GPIO_ROUTE_SMI }, + [79] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [80] = LP_GPIO_OUT_LOW, + [81] = LP_GPIO_NATIVE, + [82] = LP_GPIO_OUT_HIGH, + [83] = LP_GPIO_OUT_HIGH, + [84] = LP_GPIO_OUT_HIGH, + [85] = LP_GPIO_OUT_HIGH, + [86] = LP_GPIO_OUT_HIGH, + [87] = LP_GPIO_OUT_HIGH, + [88] = LP_GPIO_OUT_HIGH, + [89] = LP_GPIO_OUT_HIGH, + [90] = LP_GPIO_OUT_HIGH, + [91] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [92] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [93] = { .conf0 = GPIO_MODE_GPIO | GPIO_DIR_INPUT | GPIO_IRQ_LEVEL }, + [94] = LP_GPIO_OUT_HIGH, + LP_GPIO_END +}; diff --git a/src/mainboard/hp/folio_9480m/hda_verb.c b/src/mainboard/hp/folio_9480m/hda_verb.c new file mode 100644 index 0000000000..fee9c3e67f --- /dev/null +++ b/src/mainboard/hp/folio_9480m/hda_verb.c @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + 0x10ec0280, /* Codec Vendor / Device ID: Realtek */ + 0x103c22db, /* Subsystem ID */ + 13, /* Number of 4 dword sets */ + AZALIA_SUBVENDOR(0, 0x103c22db), + AZALIA_PIN_CFG(0, 0x12, 0x90a60130), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0, 0x15, 0x0321101f), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x17, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x03a11020), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x40738105), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), +}; + +const u32 pc_beep_verbs[0] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/hp/folio_9480m/mainboard.c b/src/mainboard/hp/folio_9480m/mainboard.c new file mode 100644 index 0000000000..98cc8110cc --- /dev/null +++ b/src/mainboard/hp/folio_9480m/mainboard.c @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include + +static void mainboard_enable(struct device *dev) +{ + install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_DEFAULT, + GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); +} + +struct chip_operations mainboard_ops = { + .enable_dev = mainboard_enable, +}; diff --git a/src/mainboard/hp/folio_9480m/romstage.c b/src/mainboard/hp/folio_9480m/romstage.c new file mode 100644 index 0000000000..ca4046ab5d --- /dev/null +++ b/src/mainboard/hp/folio_9480m/romstage.c @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include + +void mainboard_config_rcba(void) +{ + RCBA16(D31IR) = DIR_ROUTE(PIRQF, PIRQD, PIRQC, PIRQA); + RCBA16(D29IR) = DIR_ROUTE(PIRQB, PIRQD, PIRQA, PIRQC); + RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA); + RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD); + RCBA16(D26IR) = DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD); + RCBA16(D25IR) = DIR_ROUTE(PIRQE, PIRQB, PIRQC, PIRQD); + RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD); + RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD); +} + +void mb_get_spd_map(uint8_t spd_map[4]) +{ + spd_map[0] = 0xa0; + spd_map[2] = 0xa4; +} + +void mainboard_fill_pei_data(struct pei_data *pei_data) +{ + struct usb2_port_setting usb2_ports[MAX_USB2_PORTS] = { + /* Length, Enable, OCn#, Location */ + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* left, EHCI debug */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* right */ + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WLAN */ + { 0x0110, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* SmartCard */ + { 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_MINI_PCIE }, /* WWAN */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, /* Webcam */ + { 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL }, + }; + struct usb3_port_setting usb3_ports[MAX_USB3_PORTS] = { + { 1, USB_OC_PIN_SKIP }, + { 1, USB_OC_PIN_SKIP }, /* left */ + { 1, USB_OC_PIN_SKIP }, /* right */ + { 0, USB_OC_PIN_SKIP }, + }; + memcpy(pei_data->usb2_ports, usb2_ports, sizeof(usb2_ports)); + memcpy(pei_data->usb3_ports, usb3_ports, sizeof(usb3_ports)); +} -- cgit v1.2.3