From 8816cdf3118d9d197c1b56b0ce0ed63cc119dd71 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Wed, 14 Apr 2010 16:39:30 +0000 Subject: geeesh! And this really compiles and even runs? Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5431 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/via/epia-m700/romstage.c | 115 ++++--- src/northbridge/via/vx800/detection.c | 5 + src/northbridge/via/vx800/dev_init.c | 5 +- src/northbridge/via/vx800/dram_init.h | 4 - src/northbridge/via/vx800/drdy_bl.c | 10 +- src/northbridge/via/vx800/examples/chipset_init.c | 363 +++++++++------------- src/northbridge/via/vx800/pci_rawops.h | 52 ++-- src/northbridge/via/vx800/uma_ram_setting.c | 2 +- src/northbridge/via/vx800/vx800_early_smbus.c | 8 +- src/southbridge/via/k8t890/k8t890_early_car.c | 2 +- 10 files changed, 255 insertions(+), 311 deletions(-) diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c index 6f8a1c09da..ab148e478d 100644 --- a/src/mainboard/via/epia-m700/romstage.c +++ b/src/mainboard/via/epia-m700/romstage.c @@ -58,7 +58,7 @@ * This acpi_is_wakeup_early_via_VX800 is from Rudolf's patch on the list: * http://www.coreboot.org/pipermail/coreboot/2008-January/028787.html. */ -int acpi_is_wakeup_early_via_vx800(void) +static int acpi_is_wakeup_early_via_vx800(void) { device_t dev; u16 tmp, result; @@ -94,8 +94,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void enable_mainboard_devices(void) { device_t dev; - uint16_t values; - #if 0 /* * Add and close this switch, since some line cause error, some @@ -145,6 +143,8 @@ static void enable_mainboard_devices(void) #if 0 dev = 0; dev = pci_locate_device(PCI_ID(0x1106, PCI_DEVICE_ID_VIA_VX855_IDE), 0); + + uint16_t values; values = pci_read_config16(dev, 0xBA); values &= ~0xffff; values |= 0x5324; @@ -202,68 +202,68 @@ static void enable_shadow_ram(void) */ static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = { /* VT3409 no PCI-E */ - 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E, // Set Exxxxxxx as pcie mmio config range - 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B, // Support extended cfg address of pcie - // 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02, // APIC Interrupt((BT_INTR)) Control + { 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E }, // Set Exxxxxxx as pcie mmio config range + { 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B }, // Support extended cfg address of pcie + // { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control // Set ROMSIP value by software /* - 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pullup Driving = 3 - 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pulldown Driving = 3 - 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pullup Driving = 3 - 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pulldown Driving = 3 - 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21, // Memory I/F timing ctrl - 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1, // Memory I/F timing ctrl - 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18, // AGTL+ I/O Circuit - 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C, // AGTL+ Compensation Status - 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33, // 2X AGTL+ Auto Compensation Offset - 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33, // 4X AGTL+ Auto Compensation Offset - 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72, // AGTL Compensation Status - 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77, // AGTL Compensation Status - 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44, // Input Host Address / Host Strobe Delay Control for HA Group - 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22, // Input Host Address / Host Strobe Delay Control for HA Group - 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00, // Output Delay Control of PAD for HA Group - 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA, // Host Address / Address Clock Output Delay Control (Only for P4 Bus) - 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) - 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44, // Host Data Receiving Strobe Delay Ctrl 1 - 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44, // Host Data Receiving Strobe Delay Ctrl 2 - 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00, // Output Delay of PAD for HDSTB - 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00, // Output Delay of PAD for HD - 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 0) - 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 1) - 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 2) - 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 3) + { 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pullup Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pulldown Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pullup Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pulldown Driving = 3 + { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21 }, // Memory I/F timing ctrl + { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1 }, // Memory I/F timing ctrl + { 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18 }, // AGTL+ I/O Circuit + { 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C }, // AGTL+ Compensation Status + { 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33 }, // 2X AGTL+ Auto Compensation Offset + { 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33 }, // 4X AGTL+ Auto Compensation Offset + { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72 }, // AGTL Compensation Status + { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77 }, // AGTL Compensation Status + { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44 }, // Input Host Address / Host Strobe Delay Control for HA Group + { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22 }, // Input Host Address / Host Strobe Delay Control for HA Group + { 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00 }, // Output Delay Control of PAD for HA Group + { 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA }, // Host Address / Address Clock Output Delay Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus) + { 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 1 + { 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 2 + { 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00 }, // Output Delay of PAD for HDSTB + { 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00 }, // Output Delay of PAD for HD + { 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 0) + { 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 1) + { 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 2) + { 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 3) */ // CPU Host Bus Control - 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8 - // 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW - 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW - 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB, // CPU I/F Ctrl-2: Enable all for performance - // 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK - 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK - 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C, // Misc Ctrl: Enable 8QW burst Mem Access - // 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06, // Miscellaneous Control 2 - 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04, // Miscellaneous Control 2 - 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63, // Write Policy 1 - // 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL - // 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00, // CPU Miscellaneous Control 2 - 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2, // Write Policy - 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88, // Bandwidth Timer - 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46, // CPU Misc Ctrl - // 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B, // CPU Miscellaneous Control 3 - // 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B, // CPU Miscellaneous Control 2 - 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A, // CPU Miscellaneous Control 2 - 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41, // CPU Miscellaneous Control 3 - 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06, // CPU Miscellaneous Control 4 + { 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08 }, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8 + // { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW + { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW + { 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB }, // CPU I/F Ctrl-2: Enable all for performance + // { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88 }, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK + { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44 }, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK + { 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C }, // Misc Ctrl: Enable 8QW burst Mem Access + // { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06 }, // Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04 }, // Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63 }, // Write Policy 1 + // { 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01 }, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL + // { 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00 }, // CPU Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2 }, // Write Policy + { 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88 }, // Bandwidth Timer + { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46 }, // CPU Misc Ctrl + // { 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B }, // CPU Miscellaneous Control 3 + // { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B }, // CPU Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A }, // CPU Miscellaneous Control 2 + { 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41 }, // CPU Miscellaneous Control 3 + { 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06 }, // CPU Miscellaneous Control 4 // Set APIC and SMRAM - 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00, // APIC Related Control - 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg - 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // End of the table + { 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00 }, // APIC Related Control + { 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29 }, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg + { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } // End of the table }; #define USE_VCP 1 /* 0 means "use DVP". */ @@ -383,7 +383,6 @@ void EmbedComInit(void) /* cache_as_ram.inc jumps to here. */ void main(unsigned long bist) { - unsigned cpu_reset = 0; u16 boot_mode; u8 rambits, Data8, Data; device_t device; diff --git a/src/northbridge/via/vx800/detection.c b/src/northbridge/via/vx800/detection.c index 51aa9fa302..6bbfef0168 100644 --- a/src/northbridge/via/vx800/detection.c +++ b/src/northbridge/via/vx800/detection.c @@ -17,6 +17,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* FIXME this should go away */ +static const struct mem_controller ctrl = { + .channel0 = {0x50, 0x51}, +}; + #define SMBUS_ADDR_CH_A_1 0xA0 /* Dimmx */ #define SMBUS_ADDR_CH_A_2 0xA2 /* Dimmx */ #define SMBUS_ADDR_CH_B_1 0xA4 /* Dimmx */ diff --git a/src/northbridge/via/vx800/dev_init.c b/src/northbridge/via/vx800/dev_init.c index 3a29d29aca..c3097cf2cb 100644 --- a/src/northbridge/via/vx800/dev_init.c +++ b/src/northbridge/via/vx800/dev_init.c @@ -166,7 +166,7 @@ Purpose : DRAM initialize according to the bios porting guid #define EXIST_TEST_PATTERN 0x55555555 #define NOT_EXIST_TEST_PATTERN 0xAAAAAAAA -BOOLEAN ChkForExistLowBank(void) +static BOOLEAN ChkForExistLowBank(void) { u32 *Address, data32; @@ -207,9 +207,6 @@ BOOLEAN ChkForExistLowBank(void) return TRUE; } -void InitDDR2CHC(DRAM_SYS_ATTR *DramAttr); -void InitDDR2CHB(DRAM_SYS_ATTR *DramAttr); - void DRAMInitializeProc(DRAM_SYS_ATTR *DramAttr) { u8 shift, idx; diff --git a/src/northbridge/via/vx800/dram_init.h b/src/northbridge/via/vx800/dram_init.h index 27f73f0f4d..fc0117e2db 100644 --- a/src/northbridge/via/vx800/dram_init.h +++ b/src/northbridge/via/vx800/dram_init.h @@ -121,10 +121,6 @@ struct mem_controller { u8 channel0[MAX_DIMMS]; }; -static const struct mem_controller ctrl = { - .channel0 = {0x50, 0x51}, -}; - typedef struct _DRAM_CONFIG_DATA { u8 DramClk; u8 DramTiming; diff --git a/src/northbridge/via/vx800/drdy_bl.c b/src/northbridge/via/vx800/drdy_bl.c index da8aae13c8..393f623f25 100644 --- a/src/northbridge/via/vx800/drdy_bl.c +++ b/src/northbridge/via/vx800/drdy_bl.c @@ -404,10 +404,7 @@ static const u8 PT894_64bit_DELAYMD1_RCONV0[6][6][PT894_RDRDY_TBL_Width] = void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr) { - u8 Data, CL, RDRPH; - u8 CpuFreq, DramFreq; - u8 ProgData[PT894_RDRDY_TBL_Width]; - + u8 Data; /* this function has 3 switchs, correspond to 3 level of Drdy setting. 0:Slowest, 1:Default, 2:Optimize @@ -464,6 +461,9 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr) } #endif #if 0 // 2:Optimize + u8 CpuFreq, DramFreq; + u8 CL, RDRPH; + //CL :reg6x[2:0] Data = pci_read_config8(MEMCTRL, 0x62); CL = Data & 0x07; @@ -484,6 +484,8 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr) DelayMode = CL + RDRPH; // RDELAYMD = bit0 of (CAS Latency + RDRPH) DelayMode &= 0x01; + u8 ProgData[PT894_RDRDY_TBL_Width]; + //In 364, there is no 128 bit if (DelayMode == 1) { // DelayMode 1 u8 Index; diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c index 08d3c95048..8cee44504b 100644 --- a/src/northbridge/via/vx800/examples/chipset_init.c +++ b/src/northbridge/via/vx800/examples/chipset_init.c @@ -43,12 +43,12 @@ static const struct VIA_PCI_REG_INIT_TABLE mSbStage1InitTbl[] = { {0x00, 0xFF, SB_VLINK_REG(0xE6), 0xFF, 0x39}, // Enable SMM A-Seg, MSI and Io APIC ///// SPI-BAR. //// SPI_BASE_ADDRESS = 0xFED1 0000 - 0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00, - 0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1, - 0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE, -// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00,//this , for the different macro -// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1, -// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE, + {0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00}, + {0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1}, + {0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE}, +// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00},//this , for the different macro +// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1}, +// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE}, ///// End of 2008-04-17 {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table @@ -60,191 +60,184 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = { // D0F2~D0F3 is configured by MemoryInit Peim // D0F4: NB PMU - 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB, - 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05, - 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8, - 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF, - 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC, - 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19, - 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00, - 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF, - 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF, - 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC, - 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80, - 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0, - 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6, - 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80, - 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20, + { 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB }, + { 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05 }, + { 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8 }, + { 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF }, + { 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC }, + { 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19 }, + { 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00 }, + { 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF }, + { 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF }, + { 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC }, + { 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80 }, + { 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0 }, + { 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6 }, + { 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80 }, + { 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20 }, // D0F5: NB APIC, PXPTRF and MSGC //Note: the Rx6A, RCRBH Base Address, is not set, which is related to PCIE Root Complex. //Note: the Rx60, Extended CFG Address. Support and Rx61, Extended CFG Address, are set by NB Peim that is in the PEI Phase. //Note: the Rx42, APIC Interrupt((BT_INTR)) Control, is set by NB Peim that is in PEI phase. - 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00, - 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80, - 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04, - 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00, - 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02, - 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00, - 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06, - 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18, //Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1. - 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00, //Set RVC1RPSW, RVC1RQ1T to 1. - 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81, - 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28, - 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0, - 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01, // RWAKEEN -// 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN - 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20, - 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00, //RP2P1ABORT + { 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18 }, //Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1. + { 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00 }, //Set RVC1RPSW, RVC1RQ1T to 1. + { 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0 }, + { 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01 }, // RWAKEEN + //{ 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00 }, //RTDNP2B32EN + { 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20 }, + { 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00 }, //RP2P1ABORT // fine-tune // If no settings, C7 will hang or reboot in XP, but CN will not. - 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00, - 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03, - 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00, - 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00, - 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01, - 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10, - 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08, - 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04, // ACPI Base addr - 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01, // APIC MSI - 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00, // APIC MSI + { 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00 }, + { 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03 }, + { 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00 }, + { 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00 }, + { 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01 }, + { 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10 }, + { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08 }, + { 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04 }, // ACPI Base addr + { 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01 }, // APIC MSI + { 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00 }, // APIC MSI //GTL - 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66, - 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33, - 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33, - 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33, - 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33, - 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20, - 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00, + { 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66 }, + { 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33 }, + { 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33 }, + { 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33 }, + { 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33 }, + { 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20 }, + { 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00 }, // End of Table {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table - }; static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = { // D17F0: LPC - 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44, // Enable I/O Recovery Time, 4D0/4D1 Support - 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0, // ENLBUF, GINTREN, FLUSHEN, RBRSTRD - 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B, // RENDTX, ENWBTO, ENRBTO - // 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10, // It is related to INTH# - //0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C, //RMRPW, RIRPW // Reserved in 409 by Eric + { 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44 }, // Enable I/O Recovery Time, 4D0/4D1 Support + { 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0 }, // ENLBUF, GINTREN, FLUSHEN, RBRSTRD + { 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B }, // RENDTX, ENWBTO, ENRBTO + //{ 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10 }, // It is related to INTH# + //{ 0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C }, //RMRPW, RIRPW // Reserved in 409 by Eric // Internal RTC, Mouse, Keyboard // set in PEI by Eric - //0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D, // Enable Internal RTC, Internal PS2 Mouse/Keyboard + //{ 0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D }, // Enable Internal RTC, Internal PS2 Mouse/Keyboard // RTC - 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01, //RTC Rx32 Map to Centrury Byte + { 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01 }, //RTC Rx32 Map to Centrury Byte - // 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02, // RDMEGAS - //0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08, // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric + //{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02 }, // RDMEGAS + //{ 0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08 }, // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric // Serial IRQ // set in PEI by Eric - //0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09, // Enable Serial IRQ, Start Frame Width is 6 PCI Clock. + //{ 0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09 }, // Enable Serial IRQ, Start Frame Width is 6 PCI Clock. // Enable 4D0h/4D1h Port - //0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04, // EISAXT // set in PEI by Eric + //{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04 }, // EISAXT // set in PEI by Eric // Config ROM Interface // Enable SPI/Set SPI Memory Base Address // It is initialized in PEI Phase // Subsystem ID/Vendor ID Back Door - 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06, - 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11, - 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09, - 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34, + { 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06 }, + { 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11 }, + { 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09 }, + { 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34 }, - 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40, - 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51, // Orgin value 0x53, modify for 409 by Eric - 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01, + { 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40 }, + { 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51 }, // Orgin value 0x53, modify for 409 by Eric + { 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01 }, - 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00, // Setting PCI device enable - 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00, // Setting PCI device enable - 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00, // Setting HDAC enable + { 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00 }, // Setting PCI device enable + { 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00 }, // Setting PCI device enable + { 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00 }, // Setting HDAC enable {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table }; static const struct VIA_PCI_REG_INIT_TABLE mPCI1InitTable[] = { //PCI1 Programming Sequence //(1)Configure D17F7 - 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03, - 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08, // Reserved in 409 by Eric - 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41, //RENPPB, RP2CFLSH - 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48, //ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion - // 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80, //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured. - //0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81, //RSUB_DEC_P2P, RSUBDECOD(Window Vista) + { 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03 }, + { 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08 }, // Reserved in 409 by Eric + { 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41 }, //RENPPB, RP2CFLSH + { 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48 }, //ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion + // { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80 }, //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured. + // { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81 }, //RSUB_DEC_P2P, RSUBDECOD(Window Vista) //(2)Configure D19F0 - 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07, + { 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07 }, //(3)Performance Recommended Setting //Save Power - 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01, - 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E, - 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00, + { 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01 }, + { 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E }, + { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00 }, //Enhence Host To PCI cycle performance and PCI-To-Host Cycle performance - 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82, - 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0, - 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE, + { 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82 }, + { 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0 }, + { 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE }, //Cycle Control - 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01, - 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C, + { 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01 }, + { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C }, //Arbitration control - 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F, - 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0, + { 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F }, + { 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0 }, {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table }; static const struct VIA_PCI_REG_INIT_TABLE mCCAInitTable[] = { - - 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08, //RVWREQ, ROABKDOOR + { 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08 }, //RVWREQ, ROABKDOOR //CCA's Register Programming sequence - 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08, //Config Azalia's upstream cycle high priority and other low priority - 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80, //Disable bypass asynchronous circuit - 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11, // Set SM Internal Device and HDAC Occupy Timer - 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11, // Set SM Internal Device and HDAC Promote Timer - 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02, //Use SB internal devices's original REQ - 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00, //RPINOWSC. Enable APIC Cycle Block P2C Write Cycle - 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C, //RLCKXP2C, RFSBVK. - 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00, //RBLKAPIC, RAZC3 - 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02, //RNMIFSB, RFSBVK - 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90, //RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme - 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00, //Let CCA use dynamic clock. + { 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08 }, //Config Azalia's upstream cycle high priority and other low priority + { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80 }, //Disable bypass asynchronous circuit + { 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11 }, // Set SM Internal Device and HDAC Occupy Timer + { 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11 }, // Set SM Internal Device and HDAC Promote Timer + { 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02 }, //Use SB internal devices's original REQ + { 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00 }, //RPINOWSC. Enable APIC Cycle Block P2C Write Cycle + { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C }, //RLCKXP2C, RFSBVK. + { 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00 }, //RBLKAPIC, RAZC3 + { 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02 }, //RNMIFSB, RFSBVK + { 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90 }, //RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme + { 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00 }, //Let CCA use dynamic clock. //The CCA is also relate to D17F0 - // 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00, //Disable CCA Test Mode - 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00, // Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric + //{ 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00 }, //Disable CCA Test Mode + { 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00 }, // Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table }; static const struct VIA_PCI_REG_INIT_TABLE IDEC_INIT[] = { - - // 0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05, //set to native mode - 0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07, - //0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F, + //{0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05}, //set to native mode + {0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07}, + //{0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F}, {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table - }; static const struct VIA_PCI_REG_INIT_TABLE mSbApicInitTable[] = { - 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00, - 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00, - 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00, - 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40, - 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04, - //0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F, - {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table - + { 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00 }, + { 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00 }, + { 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00 }, + { 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40 }, + { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04 }, + //{ 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F }, + { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table }; - - void AcpiInit(void) { device_t_raw rawdevice = 0; @@ -268,10 +261,8 @@ void AcpiInit(void) // Close all SMI/Io Traps outb(0x00, VX800_ACPI_IO_BASE + 0x42); - } - void Stage2NbInit(void) { device_t_raw rawdevice = 0; @@ -290,7 +281,6 @@ void Stage2NbInit(void) //vx855 NB no pcie bus //vx855 NB no apic - } void IDECSupportOption(u8 sbchiprev) @@ -313,7 +303,6 @@ void InitIDEC(u8 sbchiprev) IDECSupportOption(sbchiprev); } - void InitUHCI(u8 Number, u8 bEnable) { u8 Mask, Value; @@ -374,25 +363,24 @@ void InitUHCI(u8 Number, u8 bEnable) static const struct VIA_PCI_REG_INIT_TABLE mEHCIInitTable[] = { //EHCI - 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0, - 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80, - 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E, - 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68, - 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69, - 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94, - 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00, - 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A, - 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89, - 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03, - 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A, - 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00, - 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00, - 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00, - 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00, - 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01, - 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11, - {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table - + { 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0 }, + { 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80 }, + { 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E }, + { 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68 }, + { 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69 }, + { 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94 }, + { 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00 }, + { 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A }, + { 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89 }, + { 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03 }, + { 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A }, + { 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00 }, + { 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00 }, + { 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00 }, + { 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00 }, + { 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01 }, + { 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11 }, + { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table }; void InitEHCI(u8 Number, u8 bEnable) @@ -483,23 +471,23 @@ void HpetInit(void) static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = { // Power Management - 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20, - 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00, - 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18, + { 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20 }, + { 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00 }, + { 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18 }, //Miscellaneous Configuration 1 - 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28, - 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1, - 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10, - 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2, + { 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28 }, + { 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1 }, + { 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10 }, + { 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2 }, //Voltage Change Function Enable - 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21, + { 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21 }, //Internal PCIe and NM PLL Control - 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA, + { 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA }, - 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80, - {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table + { 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80 }, + { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table }; void InitPMU(u8 sbchiprev) @@ -589,7 +577,6 @@ void Stage2SbInit(void) } - void init_VIA_chipset(void) { printk(BIOS_DEBUG, "In: init_VIA_chipset\n"); @@ -633,7 +620,6 @@ void hardwaremain(int boot_complete) printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); #if 0 - pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80); pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20); pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5, @@ -656,7 +642,6 @@ void hardwaremain(int boot_complete) printk(BIOS_INFO, "=================SB 50h=%02x \n", pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50)); - /* FIXME: Is there a better way to handle this? */ init_timer(); printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); @@ -690,9 +675,7 @@ void hardwaremain(int boot_complete) y = 0; for (; y < 16; y++) { printk(BIOS_INFO, "%02x ", - pci_rawread_config8(PCI_RAWDEV - (0, 0x10, 4), - x * 16 + y)); + pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } printk(BIOS_INFO, "\n"); } @@ -710,9 +693,7 @@ void hardwaremain(int boot_complete) y = 0; for (; y < 16; y++) { printk(BIOS_INFO, "%02x ", - pci_rawread_config8(PCI_RAWDEV - (0, 0x10, 4), - x * 16 + y)); + pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } printk(BIOS_INFO, "\n"); } @@ -722,7 +703,6 @@ void hardwaremain(int boot_complete) post_code(0x89); printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__); - // pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571); #if 0 @@ -732,17 +712,13 @@ void hardwaremain(int boot_complete) y = 0; for (; y < 16; y++) { printk(BIOS_INFO, "%02x ", - pci_rawread_config8(PCI_RAWDEV - (0, 0x10, 4), - x * 16 + y)); + pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y)); } printk(BIOS_INFO, "\n"); } #endif - #if 0 - y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d); y &= 0x0f; y |= 0x40; @@ -750,8 +726,6 @@ void hardwaremain(int boot_complete) #endif #if 0 - - static const d0f0pcitable[5] = { 0xD0, 0, 0, 0, 0xFD }; static const d0f2pcitable[16 * 7 + 1] = { 0x88, 0xF8, 0xEF, 0x44, 0x7C, 0x24, 0x63, 0x01, 0x00, 0x09, @@ -911,7 +885,6 @@ void hardwaremain(int boot_complete) 0x00, 0x00, 0x48, 0x00, 0x00, 0x00, }; - #define OPTION_1 1 #define NOOPTION_1 1 #ifdef OPTION_1 @@ -943,24 +916,19 @@ void hardwaremain(int boot_complete) }; #endif - - u8 i; /* error form ---- but add the chance to resume -for(i=0;i<5;i++){ + for(i=0;i<5;i++) { pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]); } - - */ /* RO reg -for(i=0;i<5;i++){ + for(i=0;i<5;i++) { pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]); } */ - //boot ok, resume still err in linux #if 1 for (i = 0; i < 9; i++) { @@ -1052,11 +1020,7 @@ for(i=0;i<5;i++){ //d15f0 - - - #if 1 - pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2); // no affect. pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2); pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2); @@ -1077,8 +1041,6 @@ for(i=0;i<5;i++){ pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80); #endif - - #if 1 //before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok // for(i=0;i<192;i++){ @@ -1094,7 +1056,6 @@ for(i=0;i<5;i++){ d11f0pcitable[i]); } - for (i = 18; i < 21; i++) { //sleep ok , sleep err 1, resume pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40, d11f0pcitable[i]); @@ -1225,7 +1186,6 @@ for(i=0;i<5;i++){ pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72, PCI_DEVICE_ID_VIA_VX855_LPC); - //boot ok, resume still err in linux for (i = 0; i < 192; i++) { pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40, @@ -1240,17 +1200,12 @@ for(i=0;i<5;i++){ pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02); pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f); #endif - pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20); pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31); - - #ifdef OPTION_1 pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00); #endif - - #endif u8 i911; @@ -1262,10 +1217,9 @@ for(i=0;i<5;i++){ i911 |= 0x01; pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911); - #if 1 struct device *dev; - printk(BIOS_INFO, "=========zjldump all devices...\n"); + printk(BIOS_INFO, "========= dump all devices...\n"); for (dev = all_devices; dev; dev = dev->next) { if (dev->path.type == DEVICE_PATH_PCI) { printk(BIOS_DEBUG, "%s dump\n", dev_path(dev)); @@ -1274,25 +1228,14 @@ for(i=0;i<5;i++){ y = 0; for (; y < 16; y++) { printk(BIOS_INFO, "%02x ", - pci_read_config8(dev, - x * - 16 + - y)); + pci_read_config8(dev, x * 16 + y)); } printk(BIOS_INFO, "\n"); } - } printk(BIOS_INFO, "\n"); } #endif - - - - //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);// -// pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);/// - - - + //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);/// } diff --git a/src/northbridge/via/vx800/pci_rawops.h b/src/northbridge/via/vx800/pci_rawops.h index d0aa392a5a..7fabc3e105 100644 --- a/src/northbridge/via/vx800/pci_rawops.h +++ b/src/northbridge/via/vx800/pci_rawops.h @@ -37,13 +37,16 @@ struct VIA_PCI_REG_INIT_TABLE { u8 Mask; u8 Value; }; + typedef unsigned device_t_raw; /* pci and pci_mmio need to have different ways to have dev */ +#warning "FIXME: get rid of this extra copy of pci access functions." + /* FIXME: We need to make the coreboot to run at 64bit mode, So when read/write memory above 4G, * We don't need to set %fs, and %gs anymore * Before that We need to use %gs, and leave %fs to other RAM access */ -u8 pci_io_rawread_config8(device_t_raw dev, unsigned where) +static u8 pci_io_rawread_config8(device_t_raw dev, unsigned where) { unsigned addr; #if CONFIG_PCI_IO_CFG_EXT == 0 @@ -56,14 +59,14 @@ u8 pci_io_rawread_config8(device_t_raw dev, unsigned where) } #if CONFIG_MMCONF_SUPPORT -u8 pci_mmio_rawread_config8(device_t_raw dev, unsigned where) +static u8 pci_mmio_rawread_config8(device_t_raw dev, unsigned where) { unsigned addr; addr = dev | where; return read8x(addr); } #endif -u8 pci_rawread_config8(device_t_raw dev, unsigned where) +static u8 pci_rawread_config8(device_t_raw dev, unsigned where) { #if CONFIG_MMCONF_SUPPORT return pci_mmio_rawread_config8(dev, where); @@ -72,7 +75,7 @@ u8 pci_rawread_config8(device_t_raw dev, unsigned where) #endif } -u16 pci_io_rawread_config16(device_t_raw dev, unsigned where) +static u16 pci_io_rawread_config16(device_t_raw dev, unsigned where) { unsigned addr; #if CONFIG_PCI_IO_CFG_EXT == 0 @@ -85,7 +88,7 @@ u16 pci_io_rawread_config16(device_t_raw dev, unsigned where) } #if CONFIG_MMCONF_SUPPORT -u16 pci_mmio_rawread_config16(device_t_raw dev, unsigned where) +static u16 pci_mmio_rawread_config16(device_t_raw dev, unsigned where) { unsigned addr; addr = dev | where; @@ -93,7 +96,7 @@ u16 pci_mmio_rawread_config16(device_t_raw dev, unsigned where) } #endif -u16 pci_rawread_config16(device_t_raw dev, unsigned where) +static u16 pci_rawread_config16(device_t_raw dev, unsigned where) { #if CONFIG_MMCONF_SUPPORT return pci_mmio_rawread_config16(dev, where); @@ -102,7 +105,7 @@ u16 pci_rawread_config16(device_t_raw dev, unsigned where) #endif } -u32 pci_io_rawread_config32(device_t_raw dev, unsigned where) +static u32 pci_io_rawread_config32(device_t_raw dev, unsigned where) { unsigned addr; #if CONFIG_PCI_IO_CFG_EXT == 0 @@ -115,7 +118,7 @@ u32 pci_io_rawread_config32(device_t_raw dev, unsigned where) } #if CONFIG_MMCONF_SUPPORT -u32 pci_mmio_rawread_config32(device_t_raw dev, unsigned where) +static u32 pci_mmio_rawread_config32(device_t_raw dev, unsigned where) { unsigned addr; addr = dev | where; @@ -123,7 +126,7 @@ u32 pci_mmio_rawread_config32(device_t_raw dev, unsigned where) } #endif -u32 pci_rawread_config32(device_t_raw dev, unsigned where) +static u32 pci_rawread_config32(device_t_raw dev, unsigned where) { #if CONFIG_MMCONF_SUPPORT return pci_mmio_rawread_config32(dev, where); @@ -132,7 +135,7 @@ u32 pci_rawread_config32(device_t_raw dev, unsigned where) #endif } -void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) +static void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) { unsigned addr; #if CONFIG_PCI_IO_CFG_EXT == 0 @@ -145,7 +148,7 @@ void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) } #if CONFIG_MMCONF_SUPPORT -void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) +static void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) { unsigned addr; addr = dev | where; @@ -153,7 +156,7 @@ void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) } #endif -void pci_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) +static void pci_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) { #if CONFIG_MMCONF_SUPPORT pci_mmio_rawwrite_config8(dev, where, value); @@ -162,7 +165,7 @@ void pci_rawwrite_config8(device_t_raw dev, unsigned where, u8 value) #endif } -void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) +static void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) { unsigned addr; #if CONFIG_PCI_IO_CFG_EXT == 0 @@ -175,7 +178,7 @@ void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) } #if CONFIG_MMCONF_SUPPORT -void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where, +static void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) { unsigned addr; @@ -184,7 +187,7 @@ void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where, } #endif -void pci_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) +static void pci_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) { #if CONFIG_MMCONF_SUPPORT pci_mmio_rawwrite_config16(dev, where, value); @@ -193,7 +196,7 @@ void pci_rawwrite_config16(device_t_raw dev, unsigned where, u16 value) #endif } -void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) +static void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) { unsigned addr; #if CONFIG_PCI_IO_CFG_EXT == 0 @@ -206,8 +209,7 @@ void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) } #if CONFIG_MMCONF_SUPPORT -void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where, - u32 value) +static void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) { unsigned addr; addr = dev | where; @@ -215,7 +217,7 @@ void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where, } #endif -void pci_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) +static void pci_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) { #if CONFIG_MMCONF_SUPPORT pci_mmio_rawwrite_config32(dev, where, value); @@ -224,7 +226,7 @@ void pci_rawwrite_config32(device_t_raw dev, unsigned where, u32 value) #endif } -void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval, u8 mask) +static void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval, u8 mask) { u8 data = pci_rawread_config8(dev, where); data &= (~mask); @@ -232,7 +234,7 @@ void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval, u8 mask) pci_rawwrite_config8(dev, where, data); } -void pci_rawmodify_config16(device_t_raw dev, unsigned where, u16 orval, u16 mask) +static void pci_rawmodify_config16(device_t_raw dev, unsigned where, u16 orval, u16 mask) { u16 data = pci_rawread_config16(dev, where); data &= (~mask); @@ -240,7 +242,7 @@ void pci_rawmodify_config16(device_t_raw dev, unsigned where, u16 orval, u16 mas pci_rawwrite_config16(dev, where, data); } -void pci_rawmodify_config32(device_t_raw dev, unsigned where, u32 orval, u32 mask) +static void pci_rawmodify_config32(device_t_raw dev, unsigned where, u32 orval, u32 mask) { u32 data = pci_rawread_config32(dev, where); data &= (~mask); @@ -248,7 +250,7 @@ void pci_rawmodify_config32(device_t_raw dev, unsigned where, u32 orval, u32 mas pci_rawwrite_config32(dev, where, data); } -void io_rawmodify_config8(u16 where, u8 orval, u8 mask) +static void io_rawmodify_config8(u16 where, u8 orval, u8 mask) { u8 data = inb(where); data &= (~mask); @@ -256,8 +258,8 @@ void io_rawmodify_config8(u16 where, u8 orval, u8 mask) outb(data, where); } -void via_pci_inittable(u8 chipversion, - struct VIA_PCI_REG_INIT_TABLE *initdata) +static void via_pci_inittable(u8 chipversion, + const struct VIA_PCI_REG_INIT_TABLE *initdata) { u8 i = 0; device_t_raw devbxdxfx; diff --git a/src/northbridge/via/vx800/uma_ram_setting.c b/src/northbridge/via/vx800/uma_ram_setting.c index 71379e7ec3..72420981ff 100644 --- a/src/northbridge/via/vx800/uma_ram_setting.c +++ b/src/northbridge/via/vx800/uma_ram_setting.c @@ -71,7 +71,7 @@ void SetUMARam(void) u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 }; device_t vga_dev = PCI_DEV(0, 1, 0), d0f0_dev = PCI_DEV(0, 0, 0); u8 ByteVal, temp; - UMARAM *pUMARamTable; + const UMARAM *pUMARamTable; u16 UmaSize; u8 SLD0F3Val, SLD1F0Val, VgaPortVal; u32 RamSize, SLBase, Tmp; diff --git a/src/northbridge/via/vx800/vx800_early_smbus.c b/src/northbridge/via/vx800/vx800_early_smbus.c index 93b1461e9a..53ede31cf8 100644 --- a/src/northbridge/via/vx800/vx800_early_smbus.c +++ b/src/northbridge/via/vx800/vx800_early_smbus.c @@ -244,14 +244,14 @@ static void enable_smbus(void) * be created just for it. If some other chip needs/wants it, we can * worry about it then. * - * @param ctrl The memory controller and SMBus addresses. + * @param mem_ctrl The memory controller and SMBus addresses. */ -void smbus_fixup(const struct mem_controller *ctrl) +static void smbus_fixup(const struct mem_controller *mem_ctrl) { int i, ram_slots, current_slot = 0; u8 result = 0; - ram_slots = ARRAY_SIZE(ctrl->channel0); + ram_slots = ARRAY_SIZE(mem_ctrl->channel0); if (!ram_slots) { print_err("smbus_fixup() thinks there are no RAM slots!\n"); return; @@ -272,7 +272,7 @@ void smbus_fixup(const struct mem_controller *ctrl) if (current_slot > ram_slots) current_slot = 0; - result = get_spd_data(ctrl->channel0[current_slot], + result = get_spd_data(mem_ctrl->channel0[current_slot], SPD_MEMORY_TYPE); current_slot++; PRINT_DEBUG("."); diff --git a/src/southbridge/via/k8t890/k8t890_early_car.c b/src/southbridge/via/k8t890/k8t890_early_car.c index a33d6cb5f9..7c6a0ba16d 100644 --- a/src/southbridge/via/k8t890/k8t890_early_car.c +++ b/src/southbridge/via/k8t890/k8t890_early_car.c @@ -34,7 +34,7 @@ /* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */ -static ldtreg[3] = {0x86, 0xa6, 0xc6}; +static u8 ldtreg[3] = {0x86, 0xa6, 0xc6}; /* This functions sets KT890 link frequency and width to same values as * it has been setup on K8 side, by AMD NB init. -- cgit v1.2.3