From e474070bdd3410fef471a7a142453a883a9f7793 Mon Sep 17 00:00:00 2001 From: Nils Jacobs Date: Mon, 26 Jul 2010 23:46:25 +0000 Subject: This patch converts the Geode GX2 boards to CAR. Signed-off-by: Nils Jacobs Acked-by: Joseph Smith git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5669 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_gx2/Kconfig | 4 +- src/cpu/amd/model_gx2/Makefile.inc | 3 + src/cpu/amd/model_gx2/cpureginit.c | 128 +--------------------- src/cpu/amd/model_gx2/syspreinit.c | 10 +- src/include/cpu/amd/gx2def.h | 10 +- src/mainboard/amd/rumba/Kconfig | 3 +- src/mainboard/amd/rumba/romstage.c | 22 +--- src/mainboard/lippert/frontrunner/Kconfig | 3 +- src/mainboard/lippert/frontrunner/romstage.c | 32 ++---- src/mainboard/olpc/btest/Kconfig | 3 +- src/mainboard/olpc/btest/romstage.c | 17 +-- src/mainboard/olpc/rev_a/Kconfig | 3 +- src/mainboard/olpc/rev_a/romstage.c | 17 +-- src/mainboard/wyse/s50/Kconfig | 3 +- src/mainboard/wyse/s50/romstage.c | 31 +----- src/northbridge/amd/gx2/pll_reset.c | 2 + src/northbridge/amd/gx2/raminit.c | 11 +- src/northbridge/amd/gx2/raminit.h | 2 + src/southbridge/amd/cs5535/chipsetinit.c | 2 - src/southbridge/amd/cs5535/cs5535.h | 121 +++++++++++++++++++++ src/southbridge/amd/cs5535/cs5535_early_setup.c | 87 +++++---------- src/southbridge/amd/cs5535/cs5535_early_smbus.c | 25 +---- src/southbridge/amd/cs5535/cs5535_smbus.h | 134 ------------------------ 23 files changed, 212 insertions(+), 461 deletions(-) diff --git a/src/cpu/amd/model_gx2/Kconfig b/src/cpu/amd/model_gx2/Kconfig index 610120a3bf..23c0ac75ea 100644 --- a/src/cpu/amd/model_gx2/Kconfig +++ b/src/cpu/amd/model_gx2/Kconfig @@ -22,12 +22,12 @@ config CPU_AMD_GX2 config DCACHE_RAM_BASE hex - default 0xc0000 + default 0xc8000 depends on CPU_AMD_GX2 config DCACHE_RAM_SIZE hex - default 0x01000 + default 0x04000 depends on CPU_AMD_GX2 config GEODE_VSA diff --git a/src/cpu/amd/model_gx2/Makefile.inc b/src/cpu/amd/model_gx2/Makefile.inc index 205ddae3f3..50fdc5445c 100644 --- a/src/cpu/amd/model_gx2/Makefile.inc +++ b/src/cpu/amd/model_gx2/Makefile.inc @@ -2,5 +2,8 @@ subdirs-y += ../../x86/tsc subdirs-y += ../../x86/lapic subdirs-y += ../../x86/cache subdirs-y += ../../x86/smm + driver-y += model_gx2_init.o obj-y += cpubug.o + +cpu_incs += $(src)/cpu/amd/model_gx2/cache_as_ram.inc diff --git a/src/cpu/amd/model_gx2/cpureginit.c b/src/cpu/amd/model_gx2/cpureginit.c index 3cb3cf1a58..609147c6c1 100644 --- a/src/cpu/amd/model_gx2/cpureginit.c +++ b/src/cpu/amd/model_gx2/cpureginit.c @@ -1,81 +1,9 @@ - -/* ***************************************************************************/ -/* **/ -/* * BIST */ -/* **/ -/* * GX2 BISTs need to be run before BTB or caches are enabled.*/ -/* * BIST result left in registers on failure to be checked with FS2.*/ -/* **/ -/* ***************************************************************************/ -static void -BIST(void){ - int msrnum; - msr_t msr; - - /* DM*/ - msrnum = CPU_DM_CONFIG0; - msr = rdmsr(msrnum); - msr.lo |= DM_CONFIG0_LOWER_DCDIS_SET; - wrmsr(msrnum, msr); - - msr.lo = 0x00000003F; - msr.hi = 0x000000000; - msrnum = CPU_DM_BIST; - wrmsr(msrnum, msr); - - outb(POST_CPU_DM_BIST_FAILURE, 0x80); /* 0x29*/ - msr = rdmsr(msrnum); /* read back for pass fail*/ - msr.lo &= 0x0F3FF0000; - if (msr.lo != 0xfeff0000) - goto BISTFail; - - msrnum = CPU_DM_CONFIG0; - msr = rdmsr(msrnum); - msr.lo &= ~ DM_CONFIG0_LOWER_DCDIS_SET; - wrmsr(msrnum, msr); - - /* FPU*/ - msr.lo = 0x000000131; - msr.hi = 0; - msrnum = CPU_FP_UROM_BIST; - wrmsr(msrnum, msr); - - outb(POST_CPU_FPU_BIST_FAILURE, 0x80); /* 0x89*/ - inb(0x80); /* IO delay*/ - msr = rdmsr(msrnum); /* read back for pass fail*/ - while ((msr.lo&0x884) != 0x884) - msr = rdmsr(msrnum); /* Endless loop if BIST is broken*/ - if ((msr.lo&0x642) != 0x642) - goto BISTFail; - - msr.lo = msr.hi = 0; /* clear FPU BIST bits*/ - msrnum = CPU_FP_UROM_BIST; - wrmsr(msrnum, msr); - - - /* BTB*/ - msr.lo = 0x000000303; - msr.hi = 0x000000000; - msrnum = CPU_PF_BTBRMA_BIST; - wrmsr(msrnum, msr); - - outb(POST_CPU_BTB_BIST_FAILURE , 0x80); /* 0x8A*/ - msr = rdmsr(msrnum); /* read back for pass fail*/ - if ((msr.lo & 0x3030) != 0x3030) - goto BISTFail; - - return; - -BISTFail: - print_err("BIST failed!\n"); - while(1); -} /* ***************************************************************************/ /* * cpuRegInit*/ /* ***************************************************************************/ -void -cpuRegInit (void){ +void cpuRegInit (void) +{ int msrnum; msr_t msr; /* Turn on BTM for early debug based on setup. */ @@ -197,16 +125,6 @@ cpuRegInit (void){ msr.lo |= 0x08; wrmsr(msrnum, msr); - -/* */ -/* BIST*/ -/* */ - /*if (getnvram( TOKEN_BIST_ENABLE) & == TVALUE_DISABLE) {*/ - { -// BIST(); - } - - /* */ /* Enable BTB*/ /* */ @@ -260,45 +178,3 @@ cpuRegInit (void){ } #endif } - - - - -/* ***************************************************************************/ -/* **/ -/* * MTestPinCheckBX*/ -/* **/ -/* * Set MTEST pins to expected values from OPTIONS.INC/NVRAM*/ -/* * This version is called when there isn't a stack available*/ -/* **/ -/* ***************************************************************************/ -static void -MTestPinCheckBX (void){ - int msrnum; - msr_t msr; - - /*if (getnvram( TOKEN_MTEST_ENABLE) ==TVALUE_DISABLE ) {*/ - /* return ; */ - /* } */ - - /* Turn on MTEST*/ - msrnum = MC_CFCLK_DBUG; - msr = rdmsr(msrnum); - msr.hi |= CFCLK_UPPER_MTST_B2B_DIS_SET | CFCLK_UPPER_MTEST_EN_SET; - wrmsr(msrnum, msr); - - msrnum = GLCP_SYS_RSTPLL /* Get SDR/DDR mode from GLCP*/; - msr = rdmsr(msrnum); - msr.lo >>= RSTPPL_LOWER_SDRMODE_SHIFT; - if (msr.lo & 1) { - msrnum = MC_CFCLK_DBUG; /* Turn on SDR MTEST stuff*/ - msr = rdmsr(msrnum); - msr.lo |= CFCLK_LOWER_SDCLK_SET; - msr.hi |= CFCLK_UPPER_MTST_DQS_EN_SET; - wrmsr(msrnum, msr); - } - - /* Lock the cache down here.*/ - __asm__("wbinvd\n"); - -} diff --git a/src/cpu/amd/model_gx2/syspreinit.c b/src/cpu/amd/model_gx2/syspreinit.c index c6b2ea527c..5801f33a47 100644 --- a/src/cpu/amd/model_gx2/syspreinit.c +++ b/src/cpu/amd/model_gx2/syspreinit.c @@ -7,17 +7,17 @@ /* * Destroys: Al,*/ /* **/ /* ***************************************************************************/ -static void -StartTimer1(void) +static void StartTimer1(void) { outb(0x56, 0x43); outb(0x12, 0x41); } -void -SystemPreInit(void) +void SystemPreInit(void) { /* they want a jump ... */ - __asm__("jmp .+2\ninvd\njmp.+2\n"); +#ifndef CONFIG_USE_DCACHE_RAM + __asm__ __volatile__("jmp .+2\ninvd\njmp .+2\n"); +#endif StartTimer1(); } diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h index 681b90cca0..957981b932 100644 --- a/src/include/cpu/amd/gx2def.h +++ b/src/include/cpu/amd/gx2def.h @@ -435,14 +435,15 @@ #define VIP_GLD_MSR_CAP (MSR_VIP + 0x2000) #define VIP_GLD_MSR_CONFIG (MSR_VIP + 0x2001) #define VIP_GLD_MSR_PM (MSR_VIP + 0x2004) -#define VIP_BIST (MSR_VIP + 0x2005) +#define VIP_BIST (MSR_VIP + 0x2005) +#define VIP_GIO_MSR_SEL (MSR_VIP + 0x2010) /* */ /* AES GLIU1 port 6*/ /* */ #define AES_GLD_MSR_CAP (MSR_AES + 0x2000) #define AES_GLD_MSR_CONFIG (MSR_AES + 0x2001) #define AES_GLD_MSR_PM (MSR_AES + 0x2004) -#define AES_CONTROL (MSR_AES + 0x2006) +#define AES_CONTROL (MSR_AES + 0x2006) /* more fun stuff */ #define BM 1 /* Base Mask - map power of 2 size aligned region*/ #define BMO 2 /* BM with an offset*/ @@ -695,9 +696,10 @@ #if !defined(__ROMCC__) && !defined(ASSEMBLY) #if defined(__PRE_RAM__) -#else -void cpubug(void); +void cpuRegInit(void); +void SystemPreInit(void); #endif +void cpubug(void); #endif #endif /* CPU_AMD_GX2DEF_H */ diff --git a/src/mainboard/amd/rumba/Kconfig b/src/mainboard/amd/rumba/Kconfig index 98bea7e33c..3a76969a55 100644 --- a/src/mainboard/amd/rumba/Kconfig +++ b/src/mainboard/amd/rumba/Kconfig @@ -23,8 +23,9 @@ config BOARD_AMD_RUMBA select CPU_AMD_GX2 select NORTHBRIDGE_AMD_GX2 select SOUTHBRIDGE_AMD_CS5536 - select ROMCC select UDELAY_TSC + select USE_DCACHE_RAM + select USE_PRINTK_IN_CAR select HAVE_PIRQ_TABLE select BOARD_ROMSIZE_KB_256 diff --git a/src/mainboard/amd/rumba/romstage.c b/src/mainboard/amd/rumba/romstage.c index ca2aac9cd5..120720f77a 100644 --- a/src/mainboard/amd/rumba/romstage.c +++ b/src/mainboard/amd/rumba/romstage.c @@ -2,7 +2,6 @@ #include #include #include -#include #include #include #include "lib/ramtest.c" @@ -99,22 +98,9 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) #include "northbridge/amd/gx2/pll_reset.c" #include "cpu/amd/model_gx2/cpureginit.c" #include "cpu/amd/model_gx2/syspreinit.c" -static void msr_init(void) -{ - /* total physical memory */ - __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02); - - /* traditional memory 0kB-512kB, 512kB-1MB */ - __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000); +#include "cpu/amd/model_lx/msrinit.c" - __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000); - - /* put code in northbridge[init].c here */ -} - -static void main(unsigned long bist) +void main(unsigned long bist) { static const struct mem_controller memctrl [] = { {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} @@ -122,13 +108,15 @@ static void main(unsigned long bist) SystemPreInit(); - w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); uart_init(); console_init(); cs5536_early_setup(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + pll_reset(); cpuRegInit(); diff --git a/src/mainboard/lippert/frontrunner/Kconfig b/src/mainboard/lippert/frontrunner/Kconfig index f99058b8cb..fdf507d6a6 100644 --- a/src/mainboard/lippert/frontrunner/Kconfig +++ b/src/mainboard/lippert/frontrunner/Kconfig @@ -4,8 +4,9 @@ config BOARD_LIPPERT_FRONTRUNNER select CPU_AMD_GX2 select NORTHBRIDGE_AMD_GX2 select SOUTHBRIDGE_AMD_CS5535 - select ROMCC select UDELAY_TSC + select USE_DCACHE_RAM + select USE_PRINTK_IN_CAR select HAVE_PIRQ_TABLE select BOARD_ROMSIZE_KB_256 diff --git a/src/mainboard/lippert/frontrunner/romstage.c b/src/mainboard/lippert/frontrunner/romstage.c index f6ef0bba76..c074fccdad 100644 --- a/src/mainboard/lippert/frontrunner/romstage.c +++ b/src/mainboard/lippert/frontrunner/romstage.c @@ -2,7 +2,6 @@ #include #include #include -#include #include #include #include "lib/ramtest.c" @@ -10,6 +9,7 @@ #include "cpu/x86/bist.h" #include "cpu/x86/msr.h" #include +#include "southbridge/amd/cs5535/cs5535.h" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -46,31 +46,9 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) #include "northbridge/amd/gx2/pll_reset.c" #include "cpu/amd/model_gx2/cpureginit.c" #include "cpu/amd/model_gx2/syspreinit.c" -static void msr_init(void) -{ - __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02); - - __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000); - __builtin_wrmsr(0x10000026, 0x400fffc0, 0x2cfbc040); - __builtin_wrmsr(0x10000027, 0xfff00000, 0xff); - __builtin_wrmsr(0x10000028, 0x7bf00100, 0x2000000f); - __builtin_wrmsr(0x1000002c, 0xff030003, 0x20000000); - - __builtin_wrmsr(0x10000080, 0x3, 0x0); - - __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000); - __builtin_wrmsr(0x40000023, 0x400fffc0, 0x20000040); - __builtin_wrmsr(0x40000024, 0xff4ffffc, 0x200000ef); - __builtin_wrmsr(0x40000029, 0x7bf00100, 0x2000000f); - __builtin_wrmsr(0x4000002d, 0xff030003, 0x20000000); - - __builtin_wrmsr(0x50002001, 0x27, 0x0); - __builtin_wrmsr(0x4c002001, 0x1, 0x0); -} +#include "cpu/amd/model_lx/msrinit.c" -static void main(unsigned long bist) +void main(unsigned long bist) { static const struct mem_controller memctrl [] = { {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} @@ -85,6 +63,10 @@ static void main(unsigned long bist) cs5535_early_setup(); print_err("done cs5535 early\n"); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + pll_reset(); print_err("done pll_reset\n"); diff --git a/src/mainboard/olpc/btest/Kconfig b/src/mainboard/olpc/btest/Kconfig index 9ed3a33a36..3b95a8ba50 100644 --- a/src/mainboard/olpc/btest/Kconfig +++ b/src/mainboard/olpc/btest/Kconfig @@ -4,8 +4,9 @@ config BOARD_OLPC_BTEST select CPU_AMD_GX2 select NORTHBRIDGE_AMD_GX2 select SOUTHBRIDGE_AMD_CS5536 - select ROMCC select UDELAY_TSC + select USE_DCACHE_RAM + select USE_PRINTK_IN_CAR select HAVE_PIRQ_TABLE select BOARD_ROMSIZE_KB_256 diff --git a/src/mainboard/olpc/btest/romstage.c b/src/mainboard/olpc/btest/romstage.c index a0e71d8584..a6d675fadd 100644 --- a/src/mainboard/olpc/btest/romstage.c +++ b/src/mainboard/olpc/btest/romstage.c @@ -2,7 +2,6 @@ #include #include #include -#include #include #include #include "lib/ramtest.c" @@ -132,16 +131,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) #include "northbridge/amd/gx2/pll_reset.c" #include "cpu/amd/model_gx2/cpureginit.c" #include "cpu/amd/model_gx2/syspreinit.c" -static void msr_init(void) -{ - __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02); - - __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000); - - __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000); -} +#include "cpu/amd/model_lx/msrinit.c" static void gpio_init(void) { @@ -155,7 +145,7 @@ static void gpio_init(void) outl(m, GPIOL_EVENTS_ENABLE); } -static void main(unsigned long bist) +void main(unsigned long bist) { static const struct mem_controller memctrl [] = { {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} @@ -175,6 +165,9 @@ static void main(unsigned long bist) uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + pll_reset(); cpuRegInit(); diff --git a/src/mainboard/olpc/rev_a/Kconfig b/src/mainboard/olpc/rev_a/Kconfig index fd8a712564..6c097c1135 100644 --- a/src/mainboard/olpc/rev_a/Kconfig +++ b/src/mainboard/olpc/rev_a/Kconfig @@ -4,8 +4,9 @@ config BOARD_OLPC_REV_A select CPU_AMD_GX2 select NORTHBRIDGE_AMD_GX2 select SOUTHBRIDGE_AMD_CS5536 - select ROMCC select UDELAY_TSC + select USE_DCACHE_RAM + select USE_PRINTK_IN_CAR select HAVE_PIRQ_TABLE select BOARD_ROMSIZE_KB_256 diff --git a/src/mainboard/olpc/rev_a/romstage.c b/src/mainboard/olpc/rev_a/romstage.c index a0e71d8584..a6d675fadd 100644 --- a/src/mainboard/olpc/rev_a/romstage.c +++ b/src/mainboard/olpc/rev_a/romstage.c @@ -2,7 +2,6 @@ #include #include #include -#include #include #include #include "lib/ramtest.c" @@ -132,16 +131,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) #include "northbridge/amd/gx2/pll_reset.c" #include "cpu/amd/model_gx2/cpureginit.c" #include "cpu/amd/model_gx2/syspreinit.c" -static void msr_init(void) -{ - __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02); - - __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000); - - __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000); -} +#include "cpu/amd/model_lx/msrinit.c" static void gpio_init(void) { @@ -155,7 +145,7 @@ static void gpio_init(void) outl(m, GPIOL_EVENTS_ENABLE); } -static void main(unsigned long bist) +void main(unsigned long bist) { static const struct mem_controller memctrl [] = { {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} @@ -175,6 +165,9 @@ static void main(unsigned long bist) uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + pll_reset(); cpuRegInit(); diff --git a/src/mainboard/wyse/s50/Kconfig b/src/mainboard/wyse/s50/Kconfig index eb1d1e5cc5..21d3eccf4b 100644 --- a/src/mainboard/wyse/s50/Kconfig +++ b/src/mainboard/wyse/s50/Kconfig @@ -23,8 +23,9 @@ config BOARD_WYSE_S50 select CPU_AMD_GX2 select NORTHBRIDGE_AMD_GX2 select SOUTHBRIDGE_AMD_CS5536 - select ROMCC select UDELAY_TSC + select USE_DCACHE_RAM + select USE_PRINTK_IN_CAR select HAVE_PIRQ_TABLE select PIRQ_ROUTE select BOARD_ROMSIZE_KB_256 diff --git a/src/mainboard/wyse/s50/romstage.c b/src/mainboard/wyse/s50/romstage.c index 8a6e1213c9..b2d62a2bb1 100644 --- a/src/mainboard/wyse/s50/romstage.c +++ b/src/mainboard/wyse/s50/romstage.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include "lib/ramtest.c" @@ -122,32 +121,9 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) #include "northbridge/amd/gx2/pll_reset.c" #include "cpu/amd/model_gx2/cpureginit.c" #include "cpu/amd/model_gx2/syspreinit.c" +#include "cpu/amd/model_lx/msrinit.c" -static void msr_init(void) -{ - /* Setup access to cache under 1MB. - __builtin_wrmsr(CPU_RCONF_DEFAULT, 0x1000a000, 0x24fffc02); /* Rom Properties: Write Serialize, WriteProtect. - * RomBase: 0xFFFC0 - * SysTop to RomBase Properties: Write Serialize, Cache Disable. - * SysTop: 0x000A0 - * System Memory Properties: (Write Back) */ - - __builtin_wrmsr(CPU_RCONF_A0_BF, 0x00000000, 0x00000000); /* 0xA0000-0xBFFFF : (Write Back) */ - __builtin_wrmsr(CPU_RCONF_C0_DF, 0x00000000, 0x00000000); /* 0xC0000-0xDFFFF : (Write Back) */ - __builtin_wrmsr(CPU_RCONF_E0_FF, 0x00000000, 0x00000000); /* 0xE0000-0xFFFFF : (Write Back) */ - - /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */ - __builtin_wrmsr(MSR_GLIU0_BASE1, 0x000fff80, 0x20000000); /* 0x00000-0x7FFFF */ - __builtin_wrmsr(MSR_GLIU0_BASE2, 0x080fffe0, 0x20000000); /* 0x80000-0x9FFFF */ - __builtin_wrmsr(MSR_GLIU0_SHADOW, 0xffff0003, 0x2000ffff); /* 0xC0000-0xFFFFF */ - __builtin_wrmsr(MSR_GLIU1_BASE1, 0x000fff80, 0x20000000); /* 0x00000-0x7FFFF */ - __builtin_wrmsr(MSR_GLIU1_BASE2, 0x080fffe0, 0x20000000); /* 0x80000-0x9FFFF */ - __builtin_wrmsr(MSR_GLIU1_SHADOW, 0xffff0003, 0x2000ffff); /* 0xC0000-0xFFFFF */ - - /* put code in northbridge[init].c here */ -} - -static void main(unsigned long bist) +void main(unsigned long bist) { static const struct mem_controller memctrl [] = { {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} @@ -166,6 +142,9 @@ static void main(unsigned long bist) uart_init(); console_init(); + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + pll_reset(); cpuRegInit(); diff --git a/src/northbridge/amd/gx2/pll_reset.c b/src/northbridge/amd/gx2/pll_reset.c index c1b22a28a0..a434307035 100644 --- a/src/northbridge/amd/gx2/pll_reset.c +++ b/src/northbridge/amd/gx2/pll_reset.c @@ -4,6 +4,7 @@ #define CALIBRATE_INTERVAL ((20*CLOCK_TICK_RATE)/1000) /* 20ms */ #define CALIBRATE_DIVISOR (20*1000) /* 20ms / 20000 == 1usec */ +#if 0 static unsigned int calibrate_tsc(void) { /* Set the Gate high, disable speaker */ @@ -64,6 +65,7 @@ bad_ctc: print_err("bad_ctc\n"); return 0; } +#endif /* spll_raw_clk = SYSREF * FbDIV, * GLIU Clock = spll_raw_clk / MDIV diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c index 3f99cab8ee..c8f248d55c 100644 --- a/src/northbridge/amd/gx2/raminit.c +++ b/src/northbridge/amd/gx2/raminit.c @@ -102,17 +102,14 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) msr.lo = 0x8ea0ad6a; wrmsr(0x4c00000f, msr); - /* Fixes from Jordan Crouse of AMD. */ - - /* make sure there is nothing stale in the cache */ - __asm__("wbinvd\n"); - - print_debug("RAM DLL lock\n"); /* The RAM dll needs a write to lock on so generate a few dummy writes */ + /* Note: The descriptor needs to be enabled to point at memory */ volatile unsigned long *ptr; - for (i=0;i<5;i++) { + for (i = 0; i < 5; i++) { ptr = (void *)i; *ptr = (unsigned long)i; } + print_info("RAM DLL lock\n"); + } diff --git a/src/northbridge/amd/gx2/raminit.h b/src/northbridge/amd/gx2/raminit.h index f13f53a09f..a49bf20886 100644 --- a/src/northbridge/amd/gx2/raminit.h +++ b/src/northbridge/amd/gx2/raminit.h @@ -7,4 +7,6 @@ struct mem_controller { uint16_t channel0[DIMM_SOCKETS]; }; +void sdram_initialize(int controllers, const struct mem_controller *ctrl); + #endif /* RAMINIT_H */ diff --git a/src/southbridge/amd/cs5535/chipsetinit.c b/src/southbridge/amd/cs5535/chipsetinit.c index d31efd3e52..9fae6037ba 100644 --- a/src/southbridge/amd/cs5535/chipsetinit.c +++ b/src/southbridge/amd/cs5535/chipsetinit.c @@ -13,8 +13,6 @@ #include #include #include "southbridge/amd/cs5535/cs5535.h" -// This code uses some cs5536 includes because cs5535 includes are empty: -#include "southbridge/amd/cs5536/cs5536.h" /* the structs in this file only set msr.lo. But ... that may not always be true */ diff --git a/src/southbridge/amd/cs5535/cs5535.h b/src/southbridge/amd/cs5535/cs5535.h index 82d657204a..16a319804c 100644 --- a/src/southbridge/amd/cs5535/cs5535.h +++ b/src/southbridge/amd/cs5535/cs5535.h @@ -1,4 +1,125 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Nils Jacobs + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + #ifndef _CS5535_H #define _CS5535_H +/* SouthBridge Equates */ +#define CS5535_GLINK_PORT_NUM 0x02 /* port of the SouthBridge */ +#define NB_PCI ((2 << 29) + (4 << 26)) /* NB GLPCI is in the same location on all Geodes. */ +#define MSR_SB ((CS5535_GLINK_PORT_NUM << 23) + NB_PCI) /* address to the SouthBridge */ +#define SB_SHIFT 20 /* 29 -> 26 -> 23 -> 20...... When making a SB address uses this shift. */ + +#define CS5535_DEV_NUM 0x0F /* default PCI device number for CS5535 */ +#define SMBUS_IO_BASE 0x6000 +#define GPIO_IO_BASE 0x6100 +#define MFGPT_IO_BASE 0x6200 +#define ACPI_IO_BASE 0x9C00 +#define PMS_IO_BASE 0x9D00 + +/* Cs5536 as follows. */ +/* SB_GLIU */ +/* port0 - GLIU */ +/* port1 - GLPCI */ +/* port2 - USB Controller #2 */ +/* port3 - ATA-5 Controller */ +/* port4 - MDD */ +/* port5 - AC97 */ +/* port6 - USB Controller #1 */ +/* port7 - GLCP */ + +#define MSR_SB_GLIU ((9 << 14) + MSR_SB) /* 51024xxx or 510*xxxx - fake out just like GL0 on CPU. */ +#define MSR_SB_GLPCI (MSR_SB) /* 5100xxxx - don't go to the GLIU */ +#define MSR_SB_USB2 ((2 << SB_SHIFT) + MSR_SB) /* 5120xxxx */ +#define MSR_SB_ATA ((3 << SB_SHIFT) + MSR_SB) /* 5130xxxx */ +#define MSR_SB_MDD ((4 << SB_SHIFT) + MSR_SB) /* 5140xxxx, a.k.a. DIVIL = Diverse Integrated Logic device */ +#define MSR_SB_AC97 ((5 << SB_SHIFT) + MSR_SB) /* 5150xxxx */ +#define MSR_SB_USB1 ((6 << SB_SHIFT) + MSR_SB) /* 5160xxxx */ +#define MSR_SB_GLCP ((7 << SB_SHIFT) + MSR_SB) /* 5170xxxx */ + +/* GLIU */ +#define GLIU_SB_GLD_MSR_PM (MSR_SB_GLIU + 0x04) + +/* USB1 */ +#define USB1_SB_GLD_MSR_CONF (MSR_SB_USB1 + 0x01) +#define USB1_SB_GLD_MSR_PM (MSR_SB_USB1 + 0x04) + +/* USB2 */ +#define USB2_SB_GLD_MSR_CONF (MSR_SB_USB2 + 0x01) +#define USB2_SB_GLD_MSR_PM (MSR_SB_USB2 + 0x04) + +/* ATA */ +#define ATA_SB_GLD_MSR_CONF (MSR_SB_ATA + 0x01) +#define ATA_SB_GLD_MSR_ERR (MSR_SB_ATA + 0x03) +#define ATA_SB_GLD_MSR_PM (MSR_SB_ATA + 0x04) + +/* AC97 */ +#define AC97_SB_GLD_MSR_CONF (MSR_SB_AC97 + 0x01) +#define AC97_SB_GLD_MSR_PM (MSR_SB_AC97 + 0x04) + +/* GLPCI */ +#define GLPCI_SB_GLD_MSR_PM (MSR_SB_GLPCI + 0x04) +#define GLPCI_SB_CTRL (MSR_SB_GLPCI + 0x10) +#define GLPCI_CRTL_PPIDE_SET (1 << 17) + +/* GLCP */ +#define GLCP_SB_GLD_MSR_PM (MSR_SB_GLCP + 0x04) + +/* MDD */ +#define MDD_SB_GLD_MSR_CONF (MSR_SB_MDD + 0x01) +#define MDD_SB_GLD_MSR_PM (MSR_SB_MDD + 0x04) +#define MDD_LBAR_SMB (MSR_SB_MDD + 0x0B) +#define MDD_LBAR_GPIO (MSR_SB_MDD + 0x0C) +#define MDD_LBAR_MFGPT (MSR_SB_MDD + 0x0D) +#define MDD_LBAR_ACPI (MSR_SB_MDD + 0x0E) +#define MDD_LBAR_PMS (MSR_SB_MDD + 0x0F) +#define MDD_LBAR_FLSH0 (MSR_SB_MDD + 0x010) +#define MDD_LBAR_FLSH1 (MSR_SB_MDD + 0x011) +#define MDD_LBAR_FLSH2 (MSR_SB_MDD + 0x012) +#define MDD_LBAR_FLSH3 (MSR_SB_MDD + 0x013) +#define MDD_PIN_OPT (MSR_SB_MDD + 0x015) +#define MDD_NORF_CNTRL (MSR_SB_MDD + 0x018) + +/* GPIO */ +#define GPIOL_2_SET (1 << 2) + +/* GPIO LOW Bank Bit Registers */ +#define GPIOL_INPUT_ENABLE (0x20) +#define GPIOL_IN_AUX1_SELECT (0x34) + +/* FLASH device macros */ +#define FLASH_TYPE_NONE 0 /* No flash device installed */ +#define FLASH_TYPE_NAND 1 /* NAND device */ + +#define FLASH_IF_MEM 1 /* Memory or memory-mapped I/O interface for Flash device */ + +/* Flash Memory Mask values */ +#define FLASH_MEM_4K 0xFFFFF000 + +#if !defined(ASSEMBLY) && !defined(__ROMCC__) +#if defined(__PRE_RAM__) +void cs5535_disable_internal_uart(void); +#else +void chipsetinit(void); #endif +#endif + +#endif /* _CS5535_H */ diff --git a/src/southbridge/amd/cs5535/cs5535_early_setup.c b/src/southbridge/amd/cs5535/cs5535_early_setup.c index 91dc852012..1a612cc55f 100644 --- a/src/southbridge/amd/cs5535/cs5535_early_setup.c +++ b/src/southbridge/amd/cs5535/cs5535_early_setup.c @@ -8,9 +8,6 @@ * */ -#define CS5535_GLINK_PORT_NUM 0x02 /* the geode link port number to the CS5535 */ -#define CS5535_DEV_NUM 0x0F /* default PCI device number for CS5535 */ - /** * @brief Setup PCI IDSEL for CS5535 * @@ -51,46 +48,33 @@ static void cs5535_usb_swapsif(void) } } -static int cs5535_setup_iobase(void) +static void cs5535_setup_iobase(void) { msr_t msr; - /* setup LBAR for SMBus controller */ - __builtin_wrmsr(0x5140000b, 0x00006000, 0x0000f001); + msr.hi = 0x0000f001; + msr.lo = SMBUS_IO_BASE; + wrmsr(MDD_LBAR_SMB, msr); + /* setup LBAR for GPIO */ - __builtin_wrmsr(0x5140000c, 0x00006100, 0x0000f001); + msr.hi = 0x0000f001; + msr.lo = GPIO_IO_BASE; + wrmsr(MDD_LBAR_GPIO, msr); + /* setup LBAR for MFGPT */ - __builtin_wrmsr(0x5140000d, 0x00006200, 0x0000f001); - /* setup LBAR for ACPI */ - __builtin_wrmsr(0x5140000e, 0x00009c00, 0x0000f001); - /* setup LBAR for PM Support */ - __builtin_wrmsr(0x5140000f, 0x00009d00, 0x0000f001); -} + msr.hi = 0x0000f001; + msr.lo = MFGPT_IO_BASE; + wrmsr(MDD_LBAR_MFGPT, msr); -static void cs5535_setup_power_bottun(void) -{ - /* not implemented yet */ -#if 0 - pwrBtn_setup: - ; - ; Power Button Setup - ; - ;mov eax, 0C0020000h ; 4 seconds + lock - mov eax, 040020000h ; 4 seconds no lock - mov dx, PMLogic_BASE + 40h - out dx, eax - - ; setup GPIO24, it is the external signal for 5535 vsb_work_aux - ; which controls all voltage rails except Vstandby & Vmem. - ; We need to enable, OUT_AUX1 and OUTPUT_ENABLE in this order. - ; If GPIO24 is not enabled then soft-off will not work. - mov dx, GPIOH_OUT_AUX1_SELECT - mov eax, GPIOH_24_SET - out dx, eax - mov dx, GPIOH_OUTPUT_ENABLE - out dx, eax + /* setup LBAR for ACPI */ + msr.hi = 0x0000f001; + msr.lo = ACPI_IO_BASE; + wrmsr(MDD_LBAR_ACPI, msr); -#endif + /* setup LBAR for PM Support */ + msr.hi = 0x0000f001; + msr.lo = PMS_IO_BASE; + wrmsr(MDD_LBAR_PMS, msr); } static void cs5535_setup_gpio(void) @@ -115,27 +99,8 @@ static void cs5535_setup_gpio(void) //outl(val, 0x6100 + 0x34); } -static void cs5535_disable_internal_uart(void) +void cs5535_disable_internal_uart(void) { - /* not implemented yet */ -#if 0 - ; The UARTs default to enabled. - ; Disable and reset them and configure them later. (SIO init) - mov ecx, MDD_UART1_CONF - RDMSR - mov eax, 1h ; reset - WRMSR - mov eax, 0h ; disabled - WRMSR - - mov ecx, MDD_UART2_CONF - RDMSR - mov eax, 1h ; reset - WRMSR - mov eax, 0h ; disabled - WRMSR - -#endif } static void cs5535_setup_cis_mode(void) @@ -143,19 +108,21 @@ static void cs5535_setup_cis_mode(void) msr_t msr; /* setup CPU interface serial to mode C on both sides */ - msr = __builtin_rdmsr(0x51000010); + msr = rdmsr(GLPCI_SB_CTRL); msr.lo &= ~0x18; msr.lo |= 0x10; - __builtin_wrmsr(0x51000010, msr.lo, msr.hi); + wrmsr(GLPCI_SB_CTRL, msr); //Only do this if we are building for 5535 - __builtin_wrmsr(0x54002010, 0x00000002, 0x00000000); + msr.lo = 0x2; + msr.hi = 0x0; + wrmsr(VIP_GIO_MSR_SEL, msr); } static void dummy(void) { } -static int cs5535_early_setup(void) +static void cs5535_early_setup(void) { msr_t msr; diff --git a/src/southbridge/amd/cs5535/cs5535_early_smbus.c b/src/southbridge/amd/cs5535/cs5535_early_smbus.c index ec801f02a8..0aab46f6a3 100644 --- a/src/southbridge/amd/cs5535/cs5535_early_smbus.c +++ b/src/southbridge/amd/cs5535/cs5535_early_smbus.c @@ -3,7 +3,7 @@ #define SMBUS_IO_BASE 0x6000 /* initialization for SMBus Controller */ -static int cs5535_enable_smbus(void) +static void cs5535_enable_smbus(void) { unsigned char val; @@ -20,26 +20,3 @@ static int cs5535_enable_smbus(void) val |= (0xEF | SMB_ADD_SAEN); outb(val, SMBUS_IO_BASE + SMB_ADD); } - -static int smbus_read_byte(unsigned device, unsigned address) -{ - return do_smbus_read_byte(SMBUS_IO_BASE, device, address-1); -} - -#if 0 -static int smbus_recv_byte(unsigned device) -{ - return do_smbus_recv_byte(SMBUS_IO_BASE, device); -} - -static int smbus_send_byte(unsigned device, unsigned char val) -{ - return do_smbus_send_byte(SMBUS_IO_BASE, device, val); -} - - -static int smbus_write_byte(unsigned device, unsigned address, unsigned char val) -{ - return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val); -} -#endif diff --git a/src/southbridge/amd/cs5535/cs5535_smbus.h b/src/southbridge/amd/cs5535/cs5535_smbus.h index 799e226f5e..db35f6ee7b 100644 --- a/src/southbridge/amd/cs5535/cs5535_smbus.h +++ b/src/southbridge/amd/cs5535/cs5535_smbus.h @@ -44,137 +44,3 @@ #define SMBUS_STATUS_MASK 0xfbff #define SMBUS_IO_BASE 0x6000 - -static void smbus_delay(void) -{ - outb(0x80, 0x80); -} - -/* generate a smbus start condition */ -static int smbus_start_condition(unsigned smbus_io_base) -{ - unsigned char val; - unsigned long loops; - loops = SMBUS_TIMEOUT; - - /* issue a START condition */ - val = inb(smbus_io_base + SMB_CTRL1); - outb(val | SMB_CTRL1_START, smbus_io_base + SMB_CTRL1); - - /* check for bus conflict */ - val = inb(smbus_io_base + SMB_STS); - if ((val & SMB_STS_BER) != 0) - return SMBUS_ERROR; - - /* check for SDA status */ - do { - smbus_delay(); - val = inw(smbus_io_base + SMB_STS); - if ((val & SMB_STS_SDAST) != 0) { - break; - } - } while(--loops); - return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT; -} - -static int smbus_check_stop_condition(unsigned smbus_io_base) -{ - unsigned char val; - unsigned long loops; - loops = SMBUS_TIMEOUT; - /* check for SDA status */ - do { - smbus_delay(); - val = inw(smbus_io_base + SMB_CTRL1); - if ((val & SMB_CTRL1_STOP) == 0) { - break; - } - } while(--loops); - return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT; -} - -static int smbus_stop_condition(unsigned smbus_io_base) -{ - unsigned char val; - val = inb(smbus_io_base + SMB_CTRL1); - outb(SMB_CTRL1_STOP, smbus_io_base + SMB_CTRL1); -} - -static int smbus_send_slave_address(unsigned smbus_io_base, unsigned char device) -{ - unsigned char val; - unsigned long loops; - loops = SMBUS_TIMEOUT; - - /* send the slave address */ - outb(device, smbus_io_base + SMB_SDA); - - /* check for bus conflict and NACK */ - val = inb(smbus_io_base + SMB_STS); - if (((val & SMB_STS_BER) != 0) || - ((val & SMB_STS_NEGACK) != 0)) - return SMBUS_ERROR; - - /* check for SDA status */ - do { - smbus_delay(); - val = inw(smbus_io_base + SMB_STS); - if ((val & SMB_STS_SDAST) != 0) { - break; - } - } while(--loops); - return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT; -} - -static int smbus_send_command(unsigned smbus_io_base, unsigned char command) -{ - unsigned char val; - unsigned long loops; - loops = SMBUS_TIMEOUT; - - /* send the command */ - outb(command, smbus_io_base + SMB_SDA); - - /* check for bus conflict and NACK */ - val = inb(smbus_io_base + SMB_STS); - if (((val & SMB_STS_BER) != 0) || - ((val & SMB_STS_NEGACK) != 0)) - return SMBUS_ERROR; - - /* check for SDA status */ - do { - smbus_delay(); - val = inw(smbus_io_base + SMB_STS); - if ((val & SMB_STS_SDAST) != 0) { - break; - } - } while(--loops); - return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT; -} - -static unsigned char do_smbus_read_byte(unsigned smbus_io_base, unsigned char device, unsigned char address) -{ - unsigned char val, val1; - - smbus_check_stop_condition(smbus_io_base); - - smbus_start_condition(smbus_io_base); - - smbus_send_slave_address(smbus_io_base, device); - - smbus_send_command(smbus_io_base, address); - - smbus_start_condition(smbus_io_base); - - smbus_send_slave_address(smbus_io_base, device | 0x01); - - /* send NACK to slave */ - val = inb(smbus_io_base + SMB_CTRL1); - outb(val | SMB_CTRL1_ACK, smbus_io_base + SMB_CTRL1); - - val = inb(smbus_io_base + SMB_SDA); - - //smbus_stop_condition(smbus_io_base); - - return val; -} -- cgit v1.2.3