From f95911ad3765c0f94db241b0c95a6c0a8c608077 Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Sat, 24 Jun 2017 21:45:13 -0600 Subject: mainboard/[a-e]: add IS_ENABLED() around Kconfig symbol references Change-Id: Icca8bac5e67f83dfc5a8f5ef1cb87c6432e0a236 Signed-off-by: Martin Roth Reviewed-on: https://review.coreboot.org/20342 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/advansus/a785e-i/get_bus_conf.c | 4 ++-- src/mainboard/advansus/a785e-i/romstage.c | 4 ++-- src/mainboard/amd/bettong/BiosCallOuts.c | 2 +- src/mainboard/amd/bimini_fam10/romstage.c | 4 ++-- src/mainboard/amd/dbm690t/romstage.c | 2 +- src/mainboard/amd/dinar/rd890_cfg.h | 4 ++-- src/mainboard/amd/dinar/sb700_cfg.h | 8 ++++---- src/mainboard/amd/gardenia/BiosCallOuts.c | 2 +- src/mainboard/amd/inagua/broadcom.c | 20 +++++++++--------- src/mainboard/amd/mahogany/romstage.c | 2 +- src/mainboard/amd/mahogany_fam10/romstage.c | 4 ++-- src/mainboard/amd/parmer/buildOpts.c | 2 +- src/mainboard/amd/pistachio/romstage.c | 2 +- src/mainboard/amd/serengeti_cheetah/mptable.c | 2 +- src/mainboard/amd/serengeti_cheetah/romstage.c | 6 +++--- .../amd/serengeti_cheetah_fam10/mptable.c | 2 +- .../amd/serengeti_cheetah_fam10/romstage.c | 4 ++-- src/mainboard/amd/thatcher/buildOpts.c | 2 +- src/mainboard/amd/tilapia_fam10/romstage.c | 4 ++-- src/mainboard/amd/torpedo/Oem.h | 2 +- src/mainboard/amd/torpedo/platform_cfg.h | 4 ++-- src/mainboard/aopen/dxplplusu/romstage.c | 4 ++-- src/mainboard/apple/macbook21/gpio.c | 12 ++++++----- src/mainboard/apple/macbook21/hda_verb.c | 3 ++- src/mainboard/asrock/939a785gmh/romstage.c | 2 +- src/mainboard/asus/a8n_e/romstage.c | 2 +- src/mainboard/asus/a8v-e_deluxe/romstage.c | 2 +- src/mainboard/asus/a8v-e_se/romstage.c | 2 +- src/mainboard/asus/f2a85-m/acpi/routing.asl | 2 +- src/mainboard/asus/f2a85-m/buildOpts.c | 2 +- src/mainboard/asus/k8v-x/romstage.c | 2 +- src/mainboard/asus/kcma-d8/bootblock.c | 2 +- src/mainboard/asus/kfsn4-dre/bootblock.c | 2 +- src/mainboard/asus/kfsn4-dre_k8/bootblock.c | 2 +- src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c | 2 +- src/mainboard/asus/kgpe-d16/bootblock.c | 2 +- src/mainboard/asus/m2n-e/romstage.c | 2 +- src/mainboard/asus/m2v-mx_se/romstage.c | 2 +- src/mainboard/asus/m2v/romstage.c | 2 +- src/mainboard/asus/m4a78-em/romstage.c | 4 ++-- src/mainboard/asus/m4a785-m/romstage.c | 6 +++--- src/mainboard/asus/m5a88-v/get_bus_conf.c | 4 ++-- src/mainboard/asus/m5a88-v/romstage.c | 4 ++-- src/mainboard/avalue/eax-785e/get_bus_conf.c | 4 ++-- src/mainboard/avalue/eax-785e/romstage.c | 4 ++-- src/mainboard/broadcom/blast/mptable.c | 2 +- src/mainboard/broadcom/blast/romstage.c | 2 +- src/mainboard/dmp/vortex86ex/romstage.c | 24 +++++++++++----------- src/mainboard/emulation/qemu-i440fx/northbridge.c | 4 ++-- 49 files changed, 98 insertions(+), 95 deletions(-) diff --git a/src/mainboard/advansus/a785e-i/get_bus_conf.c b/src/mainboard/advansus/a785e-i/get_bus_conf.c index 9bd7c252da..ed46359192 100644 --- a/src/mainboard/advansus/a785e-i/get_bus_conf.c +++ b/src/mainboard/advansus/a785e-i/get_bus_conf.c @@ -21,7 +21,7 @@ #include #include #include -#if CONFIG_AMD_SB_CIMX +#if IS_ENABLED(CONFIG_AMD_SB_CIMX) #include #endif @@ -128,7 +128,7 @@ void get_bus_conf(void) apicid_base = CONFIG_MAX_PHYSICAL_CPUS; apicid_sb800 = apicid_base + 0; -#if CONFIG_AMD_SB_CIMX +#if IS_ENABLED(CONFIG_AMD_SB_CIMX) sb_Late_Post(); #endif } diff --git a/src/mainboard/advansus/a785e-i/romstage.c b/src/mainboard/advansus/a785e-i/romstage.c index f145c25707..716190387d 100644 --- a/src/mainboard/advansus/a785e-i/romstage.c +++ b/src/mainboard/advansus/a785e-i/romstage.c @@ -144,7 +144,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -158,7 +158,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb800_early_setup(); -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); post_code(0x39); diff --git a/src/mainboard/amd/bettong/BiosCallOuts.c b/src/mainboard/amd/bettong/BiosCallOuts.c index 15c4b9f792..0df8dc58f3 100644 --- a/src/mainboard/amd/bettong/BiosCallOuts.c +++ b/src/mainboard/amd/bettong/BiosCallOuts.c @@ -83,7 +83,7 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) #endif /* XHCI configuration */ -#if CONFIG_HUDSON_XHCI_ENABLE +#if IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE) FchParams_env->Usb.Xhci0Enable = TRUE; #else FchParams_env->Usb.Xhci0Enable = FALSE; diff --git a/src/mainboard/amd/bimini_fam10/romstage.c b/src/mainboard/amd/bimini_fam10/romstage.c index cdb12e3244..53cc64855d 100644 --- a/src/mainboard/amd/bimini_fam10/romstage.c +++ b/src/mainboard/amd/bimini_fam10/romstage.c @@ -136,7 +136,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -150,7 +150,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb800_early_setup(); -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); diff --git a/src/mainboard/amd/dbm690t/romstage.c b/src/mainboard/amd/dbm690t/romstage.c index b4a3d1266f..5c841cb3a9 100644 --- a/src/mainboard/amd/dbm690t/romstage.c +++ b/src/mainboard/amd/dbm690t/romstage.c @@ -88,7 +88,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/amd/dinar/rd890_cfg.h b/src/mainboard/amd/dinar/rd890_cfg.h index 86455539a4..ac3c8182a3 100644 --- a/src/mainboard/amd/dinar/rd890_cfg.h +++ b/src/mainboard/amd/dinar/rd890_cfg.h @@ -28,10 +28,10 @@ * [12..15] - Sublink (1..2), If NB connected to full link than Sublink should be set to 0. */ #ifndef DEFAULT_HT_PATH -#if CONFIG_CPU_AMD_AGESA_FAMILY10 +#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY10) #define DEFAULT_HT_PATH {0x0, 0x3} #endif -#if CONFIG_CPU_AMD_AGESA_FAMILY15 +#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_FAMILY15) #define DEFAULT_HT_PATH {0x0, 0x1} #endif #endif diff --git a/src/mainboard/amd/dinar/sb700_cfg.h b/src/mainboard/amd/dinar/sb700_cfg.h index 02c3934bfe..1896d11764 100644 --- a/src/mainboard/amd/dinar/sb700_cfg.h +++ b/src/mainboard/amd/dinar/sb700_cfg.h @@ -36,13 +36,13 @@ * before AGESA module get call. */ #ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 +#if IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_1024) #define BIOS_SIZE BIOS_SIZE_1M -#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 +#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_2048) #define BIOS_SIZE BIOS_SIZE_2M -#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1 +#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_4096) #define BIOS_SIZE BIOS_SIZE_4M -#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1 +#elif IS_ENABLED(CONFIG_COREBOOT_ROMSIZE_KB_8192) #define BIOS_SIZE BIOS_SIZE_8M #endif #endif diff --git a/src/mainboard/amd/gardenia/BiosCallOuts.c b/src/mainboard/amd/gardenia/BiosCallOuts.c index a90ad69833..2c87ccec19 100644 --- a/src/mainboard/amd/gardenia/BiosCallOuts.c +++ b/src/mainboard/amd/gardenia/BiosCallOuts.c @@ -97,7 +97,7 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr) #endif /* XHCI configuration */ -#if CONFIG_STONEYRIDGE_XHCI_ENABLE +#if IS_ENABLED(CONFIG_STONEYRIDGE_XHCI_ENABLE) FchParams_env->Usb.Xhci0Enable = TRUE; #else FchParams_env->Usb.Xhci0Enable = FALSE; diff --git a/src/mainboard/amd/inagua/broadcom.c b/src/mainboard/amd/inagua/broadcom.c index 9f140a2ce1..f1c49d204f 100644 --- a/src/mainboard/amd/inagua/broadcom.c +++ b/src/mainboard/amd/inagua/broadcom.c @@ -37,7 +37,7 @@ void broadcom_init(void); #define be(x) cpu_to_be32(x) //this is used a lot! /* C forces us to specify these before defining struct selfboot_patch :-( */ -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) #define INIT1_LENGTH 9 #define INIT2_LENGTH 10 #define INIT3_LENGTH 3 @@ -179,7 +179,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .powerdown.padding = be16(0x0000), /* Only the lines below may be adapted to your needs ... */ -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .header.mac_addr = { 0x00, 0x10, 0x18, 0x00, 0x00, 0x00 }, //Broadcom .header.subsys_device = be16(0x1699), //same as pci_device .header.subsys_vendor = be16(0x14E4), //Broadcom @@ -189,7 +189,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .header.subsys_vendor = be16(0x121D), //LiPPERT #endif .header.pci_device = be16(0x1699), //Broadcom 5785 with GbE PHY -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .header.patch_version = be16(0x010B), //1.11 (Broadcom's sb5785m1.11) #else .header.patch_version = be16(0x110B), //1.11b, i.e. hacked :-) @@ -208,7 +208,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! * 1 X 0 | 0x330C5180 - - - * 1 X 1 | 0x391C6140 - - - */ -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .header.basic_config = be16(0x0404), //original for B50610 #else .header.basic_config = be16(0x0604), //bit 9 set so not to mess up PHY regs, kept other bits unchanged @@ -244,7 +244,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! * was added, for reference see Broadcom's changelog. */ .init.hunk1_code = { -#if CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x082B8104), //CFR-AF: PHY0B: KSZ9021 select PHY104 be(0x082CF0F0), //CFR-AF: PHY0C: KSZ9021 clk/ctl skew (advised by Micrel) be(0x082B8105), //CFR-AF: PHY0B: KSZ9021 select PHY105 @@ -258,7 +258,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .init.hunk2_when = 0x30, //after global reset, PHY reset .init.hunk2_code = { -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x08370F08), //v1.06 : PHY17: B50610 select reg. 08 be(0x08350001), //v1.06 : PHY15: B50610 slow link fix be(0x08370F00), //v1.06 : PHY17: B50610 disable reg. 08 @@ -275,20 +275,20 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! be(0xC1F03604), be(0xFFE0FFFF), be(0x00110000), //v1.08 : 3604.20-16: 10Mb clock = 12.5MHz }, //-->INIT3_LENGTH! -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) .init.hunk4_when = 0xD8, //original for B50610 #else .init.hunk4_when = 0x80, //run last, after Linux' "ifconfig up" #endif .init.hunk4_code = { -#if CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x083F4300), //CFR-AF: PHY1F: IRQ active high be(0x083C0000), //CFR-AF: PHY1C: revert driver writes be(0x08380000), //CFR-AF: PHY18| be(0x083C0000), //CFR-AF: PHY1C| #endif be(0xCB0005A4), be(0xF7F0000C), //v1.01 : if 5A4.0 == 1 -->skip next 12 bytes -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0xC61005A4), be(0x3210C500), //v1.01 : 5A4: PHY LED mode #else be(0xC61005A4), be(0x331C71CE), //CFR-AF: 5A4: fake LED mode @@ -300,7 +300,7 @@ static struct selfboot_patch { //Watch out: all values are *BIG-ENDIAN*! .powerdown.hunk1_when = 0x50, //prior to IDDQ MAC .powerdown.hunk1_code = { -#if !CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF +#if !IS_ENABLED(CONFIG_BOARD_LIPPERT_FRONTRUNNER_AF) be(0x083CB001), //v1.10 : PHY1C: IDDQ B50610 PHY #endif be(0xF7F30116), // IDDQ PHY diff --git a/src/mainboard/amd/mahogany/romstage.c b/src/mainboard/amd/mahogany/romstage.c index a8e54d5db7..86cb9ab706 100644 --- a/src/mainboard/amd/mahogany/romstage.c +++ b/src/mainboard/amd/mahogany/romstage.c @@ -91,7 +91,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c index efb2885963..03938225aa 100644 --- a/src/mainboard/amd/mahogany_fam10/romstage.c +++ b/src/mainboard/amd/mahogany_fam10/romstage.c @@ -141,7 +141,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS + #if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -155,7 +155,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb7xx_51xx_early_setup(); - #if CONFIG_SET_FIDVID + #if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); diff --git a/src/mainboard/amd/parmer/buildOpts.c b/src/mainboard/amd/parmer/buildOpts.c index 8ba3c539ba..49a9feb7a9 100644 --- a/src/mainboard/amd/parmer/buildOpts.c +++ b/src/mainboard/amd/parmer/buildOpts.c @@ -154,7 +154,7 @@ #define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 #define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 -#if CONFIG_GFXUMA +#if IS_ENABLED(CONFIG_GFXUMA) #define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED //#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ diff --git a/src/mainboard/amd/pistachio/romstage.c b/src/mainboard/amd/pistachio/romstage.c index 20086193ca..7f04e7f5b9 100644 --- a/src/mainboard/amd/pistachio/romstage.c +++ b/src/mainboard/amd/pistachio/romstage.c @@ -87,7 +87,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/amd/serengeti_cheetah/mptable.c b/src/mainboard/amd/serengeti_cheetah/mptable.c index fc421a9eae..0210368a3e 100644 --- a/src/mainboard/amd/serengeti_cheetah/mptable.c +++ b/src/mainboard/amd/serengeti_cheetah/mptable.c @@ -17,7 +17,7 @@ #include #include #include -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) #include #endif #include diff --git a/src/mainboard/amd/serengeti_cheetah/romstage.c b/src/mainboard/amd/serengeti_cheetah/romstage.c index 73a1e9f133..17ac940957 100644 --- a/src/mainboard/amd/serengeti_cheetah/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah/romstage.c @@ -104,7 +104,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) struct sys_info *sysinfo = &sysinfo_car; int needs_reset; unsigned bsp_apicid = 0; -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) struct cpuid_result cpuid1; #endif @@ -127,7 +127,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); /* routing table and start other core0 */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched */ /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, * So here need to make sure last core0 is started, esp for two way system, @@ -140,7 +140,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* it will set up chains and store link pair for optimization later */ ht_setup_chains_x(sysinfo); /* it will init sblnk and sbbusn, nodes, sbdn */ -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) /* Check to see if processor is capable of changing FIDVID */ /* otherwise it will throw a GP# when reading FIDVID_STATUS */ cpuid1 = cpuid(0x80000007); diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c b/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c index d800051216..048e800603 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/mptable.c @@ -19,7 +19,7 @@ #include #include #include -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) #include #endif #include diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c index 831e050648..e130ebd78a 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c @@ -242,7 +242,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS + #if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -252,7 +252,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) post_code(0x38); - #if CONFIG_SET_FIDVID + #if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); diff --git a/src/mainboard/amd/thatcher/buildOpts.c b/src/mainboard/amd/thatcher/buildOpts.c index 8ed3bf2fdc..7bc5a7789c 100644 --- a/src/mainboard/amd/thatcher/buildOpts.c +++ b/src/mainboard/amd/thatcher/buildOpts.c @@ -154,7 +154,7 @@ #define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 #define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 -#if CONFIG_GFXUMA +#if IS_ENABLED(CONFIG_GFXUMA) #define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED //#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ diff --git a/src/mainboard/amd/tilapia_fam10/romstage.c b/src/mainboard/amd/tilapia_fam10/romstage.c index 022e91de19..92fee4562c 100644 --- a/src/mainboard/amd/tilapia_fam10/romstage.c +++ b/src/mainboard/amd/tilapia_fam10/romstage.c @@ -137,7 +137,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -151,7 +151,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb7xx_51xx_early_setup(); -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); diff --git a/src/mainboard/amd/torpedo/Oem.h b/src/mainboard/amd/torpedo/Oem.h index 0910ddc257..f8f9d80502 100644 --- a/src/mainboard/amd/torpedo/Oem.h +++ b/src/mainboard/amd/torpedo/Oem.h @@ -16,7 +16,7 @@ #define BIOS_SIZE 0x04 //04 - 1MB #endif #define LEGACY_FREE 0x00 -#if !CONFIG_ONBOARD_USB30 +#if !IS_ENABLED(CONFIG_ONBOARD_USB30) #define XHCI_SUPPORT 0x01 #endif diff --git a/src/mainboard/amd/torpedo/platform_cfg.h b/src/mainboard/amd/torpedo/platform_cfg.h index 0713e41e29..72a97d1322 100644 --- a/src/mainboard/amd/torpedo/platform_cfg.h +++ b/src/mainboard/amd/torpedo/platform_cfg.h @@ -294,7 +294,7 @@ #define INCHIP_USB_CINFIG 0x7F #define INCHIP_USB_OHCI1_CINFIG 0x01 #define INCHIP_USB_OHCI2_CINFIG 0x01 -#if CONFIG_ONBOARD_USB30 +#if IS_ENABLED(CONFIG_ONBOARD_USB30) #define INCHIP_USB_OHCI3_CINFIG 0x00 #else #define INCHIP_USB_OHCI3_CINFIG 0x01 @@ -962,7 +962,7 @@ * @li 0 - Disable * @li 1 - Enable */ -#if CONFIG_ONBOARD_USB30 +#if IS_ENABLED(CONFIG_ONBOARD_USB30) #define SB_XHCI_SWITCH 0 #else #define SB_XHCI_SWITCH 1 diff --git a/src/mainboard/aopen/dxplplusu/romstage.c b/src/mainboard/aopen/dxplplusu/romstage.c index 3fba1ad860..f79d3d3c92 100644 --- a/src/mainboard/aopen/dxplplusu/romstage.c +++ b/src/mainboard/aopen/dxplplusu/romstage.c @@ -65,8 +65,8 @@ void mainboard_romstage_entry(unsigned long bist) * is lost. Only return addresses from main() and * scrub_ecc() are recovered to stack via xmm0-xmm3. */ -#if CONFIG_HW_SCRUBBER -#if !CONFIG_USBDEBUG_IN_ROMSTAGE +#if IS_ENABLED(CONFIG_HW_SCRUBBER) +#if !IS_ENABLED(CONFIG_USBDEBUG_IN_ROMSTAGE) unsigned long ret_addr = (unsigned long)((unsigned long*)&bist - 1); e7505_mch_scrub_ecc(ret_addr); #endif diff --git a/src/mainboard/apple/macbook21/gpio.c b/src/mainboard/apple/macbook21/gpio.c index 53c5c96ebc..19296a77b8 100644 --- a/src/mainboard/apple/macbook21/gpio.c +++ b/src/mainboard/apple/macbook21/gpio.c @@ -56,7 +56,8 @@ static const struct pch_gpio_set1 pch_gpio_set1_direction = { }; static const struct pch_gpio_set1 pch_gpio_set1_level = { -#if (CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21) +#if IS_ENABLED(CONFIG_BOARD_APPLE_MACBOOK11) || \ + IS_ENABLED(CONFIG_BOARD_APPLE_MACBOOK21) .gpio5 = GPIO_LEVEL_LOW, #else /* CONFIG_BOARD_APPLE_IMAC52 */ .gpio5 = GPIO_LEVEL_HIGH, @@ -71,7 +72,8 @@ static const struct pch_gpio_set1 pch_gpio_set1_level = { static const struct pch_gpio_set1 pch_gpio_set1_invert = { .gpio1 = GPIO_INVERT, .gpio7 = GPIO_INVERT, -#if (CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21) +#if IS_ENABLED(CONFIG_BOARD_APPLE_MACBOOK11) || \ + IS_ENABLED(CONFIG_BOARD_APPLE_MACBOOK21) .gpio13 = GPIO_INVERT, #endif }; @@ -80,7 +82,7 @@ static const struct pch_gpio_set1 pch_gpio_set1_blink = { }; static const struct pch_gpio_set2 pch_gpio_set2_mode = { -#if CONFIG_BOARD_APPLE_IMAC52 +#if IS_ENABLED(CONFIG_BOARD_APPLE_IMAC52) .gpio35 = GPIO_MODE_GPIO, #endif .gpio38 = GPIO_MODE_GPIO, @@ -89,7 +91,7 @@ static const struct pch_gpio_set2 pch_gpio_set2_mode = { }; static const struct pch_gpio_set2 pch_gpio_set2_direction = { -#if CONFIG_BOARD_APPLE_IMAC52 +#if IS_ENABLED(CONFIG_BOARD_APPLE_IMAC52) .gpio35 = GPIO_DIR_OUTPUT, #endif .gpio38 = GPIO_DIR_OUTPUT, @@ -98,7 +100,7 @@ static const struct pch_gpio_set2 pch_gpio_set2_direction = { }; static const struct pch_gpio_set2 pch_gpio_set2_level = { -#if CONFIG_BOARD_APPLE_IMAC52 +#if IS_ENABLED(CONFIG_BOARD_APPLE_IMAC52) .gpio35 = GPIO_LEVEL_LOW, #endif .gpio38 = GPIO_LEVEL_HIGH, diff --git a/src/mainboard/apple/macbook21/hda_verb.c b/src/mainboard/apple/macbook21/hda_verb.c index e0fc92edbd..9ae5cf8871 100644 --- a/src/mainboard/apple/macbook21/hda_verb.c +++ b/src/mainboard/apple/macbook21/hda_verb.c @@ -19,7 +19,8 @@ const u32 cim_verb_data[] = { /* coreboot specific header */ 0x83847680, /* Codec Vendor / Device ID: SigmaTel STAC9221 A1 */ -#if CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21 +#if IS_ENABLED(CONFIG_BOARD_APPLE_MACBOOK11) || \ + IS_ENABLED(CONFIG_BOARD_APPLE_MACBOOK21) 0x106b2200, /* Subsystem ID */ 0x0000000B, /* Number of 4 dword sets */ diff --git a/src/mainboard/asrock/939a785gmh/romstage.c b/src/mainboard/asrock/939a785gmh/romstage.c index bd74fdeb08..c88f027b77 100644 --- a/src/mainboard/asrock/939a785gmh/romstage.c +++ b/src/mainboard/asrock/939a785gmh/romstage.c @@ -157,7 +157,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched */ wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c index 5a3b1f637a..dd76d8e9db 100644 --- a/src/mainboard/asus/a8n_e/romstage.c +++ b/src/mainboard/asus/a8n_e/romstage.c @@ -114,7 +114,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/a8v-e_deluxe/romstage.c b/src/mainboard/asus/a8v-e_deluxe/romstage.c index a19b46af26..7b27ed9e81 100644 --- a/src/mainboard/asus/a8v-e_deluxe/romstage.c +++ b/src/mainboard/asus/a8v-e_deluxe/romstage.c @@ -173,7 +173,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... Core0 started\n"); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/a8v-e_se/romstage.c b/src/mainboard/asus/a8v-e_se/romstage.c index 706b8592b5..dbce83eb99 100644 --- a/src/mainboard/asus/a8v-e_se/romstage.c +++ b/src/mainboard/asus/a8v-e_se/romstage.c @@ -173,7 +173,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... Core0 started\n"); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/f2a85-m/acpi/routing.asl b/src/mainboard/asus/f2a85-m/acpi/routing.asl index cc36dcd700..af8532fdc7 100644 --- a/src/mainboard/asus/f2a85-m/acpi/routing.asl +++ b/src/mainboard/asus/f2a85-m/acpi/routing.asl @@ -46,7 +46,7 @@ /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */ /* Bus 0, Dev 8 - Southbridge port (normally hidden) */ -#if CONFIG_BOARD_ASUS_F2A85_M_PRO +#if IS_ENABLED(CONFIG_BOARD_ASUS_F2A85_M_PRO) Package(){0x000FFFFF, 0, INTA, 0 }, Package(){0x000FFFFF, 1, INTB, 0 }, Package(){0x000FFFFF, 2, INTC, 0 }, diff --git a/src/mainboard/asus/f2a85-m/buildOpts.c b/src/mainboard/asus/f2a85-m/buildOpts.c index e0a1ea4d3a..ab9e1510e7 100644 --- a/src/mainboard/asus/f2a85-m/buildOpts.c +++ b/src/mainboard/asus/f2a85-m/buildOpts.c @@ -168,7 +168,7 @@ #define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3 #define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3 -#if CONFIG_GFXUMA +#if IS_ENABLED(CONFIG_GFXUMA) #define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED //#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/ diff --git a/src/mainboard/asus/k8v-x/romstage.c b/src/mainboard/asus/k8v-x/romstage.c index 1df033ad90..8fad0b412b 100644 --- a/src/mainboard/asus/k8v-x/romstage.c +++ b/src/mainboard/asus/k8v-x/romstage.c @@ -128,7 +128,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... Core0 started\n"); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/kcma-d8/bootblock.c b/src/mainboard/asus/kcma-d8/bootblock.c index 6f2c0a142d..4e8a79040f 100644 --- a/src/mainboard/asus/kcma-d8/bootblock.c +++ b/src/mainboard/asus/kcma-d8/bootblock.c @@ -33,7 +33,7 @@ void bootblock_mainboard_init(void) pci_io_write_config8(PCI_DEV(0, 0x14, 0), 0x56, byte); recovery_enabled = (!(pci_io_read_config8(PCI_DEV(0, 0x14, 0), 0x57) & 0x1)); if (recovery_enabled) { -#if CONFIG_USE_OPTION_TABLE +#if IS_ENABLED(CONFIG_USE_OPTION_TABLE) /* Clear NVRAM checksum */ for (addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { cmos_write(0x0, addr); diff --git a/src/mainboard/asus/kfsn4-dre/bootblock.c b/src/mainboard/asus/kfsn4-dre/bootblock.c index b25b34f1a4..454443f370 100644 --- a/src/mainboard/asus/kfsn4-dre/bootblock.c +++ b/src/mainboard/asus/kfsn4-dre/bootblock.c @@ -62,7 +62,7 @@ void bootblock_mainboard_init(void) recovery_enabled = bootblock_read_recovery_jumper(GPIO_DEV); if (recovery_enabled) { -#if CONFIG_USE_OPTION_TABLE +#if IS_ENABLED(CONFIG_USE_OPTION_TABLE) /* Clear NVRAM checksum */ for (addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { cmos_write(0x0, addr); diff --git a/src/mainboard/asus/kfsn4-dre_k8/bootblock.c b/src/mainboard/asus/kfsn4-dre_k8/bootblock.c index b25b34f1a4..454443f370 100644 --- a/src/mainboard/asus/kfsn4-dre_k8/bootblock.c +++ b/src/mainboard/asus/kfsn4-dre_k8/bootblock.c @@ -62,7 +62,7 @@ void bootblock_mainboard_init(void) recovery_enabled = bootblock_read_recovery_jumper(GPIO_DEV); if (recovery_enabled) { -#if CONFIG_USE_OPTION_TABLE +#if IS_ENABLED(CONFIG_USE_OPTION_TABLE) /* Clear NVRAM checksum */ for (addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { cmos_write(0x0, addr); diff --git a/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c b/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c index 101997adcc..6548d47f67 100644 --- a/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c +++ b/src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c @@ -24,7 +24,7 @@ #include #include #include -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) #include #endif #include diff --git a/src/mainboard/asus/kgpe-d16/bootblock.c b/src/mainboard/asus/kgpe-d16/bootblock.c index 6f2c0a142d..4e8a79040f 100644 --- a/src/mainboard/asus/kgpe-d16/bootblock.c +++ b/src/mainboard/asus/kgpe-d16/bootblock.c @@ -33,7 +33,7 @@ void bootblock_mainboard_init(void) pci_io_write_config8(PCI_DEV(0, 0x14, 0), 0x56, byte); recovery_enabled = (!(pci_io_read_config8(PCI_DEV(0, 0x14, 0), 0x57) & 0x1)); if (recovery_enabled) { -#if CONFIG_USE_OPTION_TABLE +#if IS_ENABLED(CONFIG_USE_OPTION_TABLE) /* Clear NVRAM checksum */ for (addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) { cmos_write(0x0, addr); diff --git a/src/mainboard/asus/m2n-e/romstage.c b/src/mainboard/asus/m2n-e/romstage.c index 915ca8414d..7cfdcfbf99 100644 --- a/src/mainboard/asus/m2n-e/romstage.c +++ b/src/mainboard/asus/m2n-e/romstage.c @@ -134,7 +134,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) setup_coherent_ht_domain(); /* Routing table and start other core0. */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* * It is said that we should start core1 after all core0 launched * becase optimize_link_coherent_ht is moved out from diff --git a/src/mainboard/asus/m2v-mx_se/romstage.c b/src/mainboard/asus/m2v-mx_se/romstage.c index 13113b4019..eebf96cad9 100644 --- a/src/mainboard/asus/m2v-mx_se/romstage.c +++ b/src/mainboard/asus/m2v-mx_se/romstage.c @@ -139,7 +139,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... All core 0 started\n"); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/m2v/romstage.c b/src/mainboard/asus/m2v/romstage.c index 61d7488653..55d5aca7e4 100644 --- a/src/mainboard/asus/m2v/romstage.c +++ b/src/mainboard/asus/m2v/romstage.c @@ -238,7 +238,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_INFO, "now booting... All core 0 started\n"); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* It is said that we should start core1 after all core0 launched. */ start_other_cores(); wait_all_other_cores_started(bsp_apicid); diff --git a/src/mainboard/asus/m4a78-em/romstage.c b/src/mainboard/asus/m4a78-em/romstage.c index 1076bf601c..3261fc771e 100644 --- a/src/mainboard/asus/m4a78-em/romstage.c +++ b/src/mainboard/asus/m4a78-em/romstage.c @@ -141,7 +141,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS + #if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -155,7 +155,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb7xx_51xx_early_setup(); - #if CONFIG_SET_FIDVID + #if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); diff --git a/src/mainboard/asus/m4a785-m/romstage.c b/src/mainboard/asus/m4a785-m/romstage.c index 40334d66b3..a97488eec9 100644 --- a/src/mainboard/asus/m4a785-m/romstage.c +++ b/src/mainboard/asus/m4a785-m/romstage.c @@ -142,7 +142,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); - #if CONFIG_LOGICAL_CPUS + #if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -156,7 +156,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb7xx_51xx_early_setup(); - #if CONFIG_SET_FIDVID + #if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); @@ -244,7 +244,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) { -#if !CONFIG_BOARD_ASUS_M4A785TM +#if !IS_ENABLED(CONFIG_BOARD_ASUS_M4A785TM) static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; /* If the BUID was adjusted in early_ht we need to do the manual override */ if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { diff --git a/src/mainboard/asus/m5a88-v/get_bus_conf.c b/src/mainboard/asus/m5a88-v/get_bus_conf.c index 5d32c3a815..85daf69ced 100644 --- a/src/mainboard/asus/m5a88-v/get_bus_conf.c +++ b/src/mainboard/asus/m5a88-v/get_bus_conf.c @@ -21,7 +21,7 @@ #include #include #include -#if CONFIG_AMD_SB_CIMX +#if IS_ENABLED(CONFIG_AMD_SB_CIMX) #include #endif @@ -128,7 +128,7 @@ void get_bus_conf(void) apicid_base = CONFIG_MAX_PHYSICAL_CPUS; apicid_sb800 = apicid_base + 0; -#if CONFIG_AMD_SB_CIMX +#if IS_ENABLED(CONFIG_AMD_SB_CIMX) sb_Late_Post(); #endif } diff --git a/src/mainboard/asus/m5a88-v/romstage.c b/src/mainboard/asus/m5a88-v/romstage.c index d11f98a039..4137e157c4 100644 --- a/src/mainboard/asus/m5a88-v/romstage.c +++ b/src/mainboard/asus/m5a88-v/romstage.c @@ -146,7 +146,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -160,7 +160,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb800_early_setup(); -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); post_code(0x39); diff --git a/src/mainboard/avalue/eax-785e/get_bus_conf.c b/src/mainboard/avalue/eax-785e/get_bus_conf.c index 5d32c3a815..85daf69ced 100644 --- a/src/mainboard/avalue/eax-785e/get_bus_conf.c +++ b/src/mainboard/avalue/eax-785e/get_bus_conf.c @@ -21,7 +21,7 @@ #include #include #include -#if CONFIG_AMD_SB_CIMX +#if IS_ENABLED(CONFIG_AMD_SB_CIMX) #include #endif @@ -128,7 +128,7 @@ void get_bus_conf(void) apicid_base = CONFIG_MAX_PHYSICAL_CPUS; apicid_sb800 = apicid_base + 0; -#if CONFIG_AMD_SB_CIMX +#if IS_ENABLED(CONFIG_AMD_SB_CIMX) sb_Late_Post(); #endif } diff --git a/src/mainboard/avalue/eax-785e/romstage.c b/src/mainboard/avalue/eax-785e/romstage.c index 464831066d..70dcc408d8 100644 --- a/src/mainboard/avalue/eax-785e/romstage.c +++ b/src/mainboard/avalue/eax-785e/romstage.c @@ -144,7 +144,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) */ wait_all_core0_started(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) /* Core0 on each node is configured. Now setup any additional cores. */ printk(BIOS_DEBUG, "start_other_cores()\n"); start_other_cores(bsp_apicid); @@ -158,7 +158,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) rs780_early_setup(); sb800_early_setup(); -#if CONFIG_SET_FIDVID +#if IS_ENABLED(CONFIG_SET_FIDVID) msr = rdmsr(0xc0010071); printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); post_code(0x39); diff --git a/src/mainboard/broadcom/blast/mptable.c b/src/mainboard/broadcom/blast/mptable.c index 81c30499ae..2417c965f7 100644 --- a/src/mainboard/broadcom/blast/mptable.c +++ b/src/mainboard/broadcom/blast/mptable.c @@ -4,7 +4,7 @@ #include #include #include -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) #include #endif #include diff --git a/src/mainboard/broadcom/blast/romstage.c b/src/mainboard/broadcom/blast/romstage.c index f49f8d385b..bb472fbdf0 100644 --- a/src/mainboard/broadcom/blast/romstage.c +++ b/src/mainboard/broadcom/blast/romstage.c @@ -90,7 +90,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS +#if IS_ENABLED(CONFIG_LOGICAL_CPUS) // It is said that we should start core1 after all core0 launched wait_all_core0_started(); start_other_cores(); diff --git a/src/mainboard/dmp/vortex86ex/romstage.c b/src/mainboard/dmp/vortex86ex/romstage.c index d2cc146059..108cc1d669 100644 --- a/src/mainboard/dmp/vortex86ex/romstage.c +++ b/src/mainboard/dmp/vortex86ex/romstage.c @@ -72,25 +72,25 @@ void set_ex_powerdown_control(void) { u32 powerdown_ctrl; powerdown_ctrl = pci_read_config32(SB, 0xbc); -#if CONFIG_TEMP_POWERDOWN +#if IS_ENABLED(CONFIG_TEMP_POWERDOWN) powerdown_ctrl |= (1 << 31); #endif -#if CONFIG_SATA_POWERDOWN +#if IS_ENABLED(CONFIG_SATA_POWERDOWN) powerdown_ctrl |= (1 << 30); #endif -#if CONFIG_ADC_POWERDOWN +#if IS_ENABLED(CONFIG_ADC_POWERDOWN) powerdown_ctrl |= (1 << 28); #endif -#if CONFIG_PCIE0_POWERDOWN +#if IS_ENABLED(CONFIG_PCIE0_POWERDOWN) powerdown_ctrl |= (1 << 13); #endif -#if CONFIG_MAC_POWERDOWN +#if IS_ENABLED(CONFIG_MAC_POWERDOWN) powerdown_ctrl |= (1 << 3); #endif -#if CONFIG_USB1_POWERDOWN +#if IS_ENABLED(CONFIG_USB1_POWERDOWN) powerdown_ctrl |= (1 << 1); #endif -#if CONFIG_IDE_POWERDOWN +#if IS_ENABLED(CONFIG_IDE_POWERDOWN) powerdown_ctrl |= (1 << 0); #endif pci_write_config32(SB, 0xbc, powerdown_ctrl); @@ -169,16 +169,16 @@ static void ex_uart_early_init(void) static void init_wdt1(void) { -#if CONFIG_WDT1_INITIALIZE -#if CONFIG_WDT1_ENABLE +#if IS_ENABLED(CONFIG_WDT1_INITIALIZE) +#if IS_ENABLED(CONFIG_WDT1_ENABLE) outb(0x1 << 6, 0xa8); #endif u8 wdt1_signal_reg = 0; -#if CONFIG_WDT1_SINGAL_NMI +#if IS_ENABLED(CONFIG_WDT1_SINGAL_NMI) wdt1_signal_reg = 0x0c << 4; -#elif CONFIG_WDT1_SIGNAL_RESET +#elif IS_ENABLED(CONFIG_WDT1_SIGNAL_RESET) wdt1_signal_reg = 0x0d << 4; -#elif CONFIG_WDT1_SIGNAL_SMI +#elif IS_ENABLED(CONFIG_WDT1_SIGNAL_SMI) wdt1_signal_reg = 0x0e << 4; #endif outb(wdt1_signal_reg, 0xa9); diff --git a/src/mainboard/emulation/qemu-i440fx/northbridge.c b/src/mainboard/emulation/qemu-i440fx/northbridge.c index d465afe6d0..18dcae349c 100644 --- a/src/mainboard/emulation/qemu-i440fx/northbridge.c +++ b/src/mainboard/emulation/qemu-i440fx/northbridge.c @@ -167,7 +167,7 @@ static void cpu_pci_domain_read_resources(struct device *dev) IORESOURCE_ASSIGNED; } -#if CONFIG_GENERATE_SMBIOS_TABLES +#if IS_ENABLED(CONFIG_GENERATE_SMBIOS_TABLES) static int qemu_get_smbios_data16(int handle, unsigned long *current) { struct smbios_type16 *t = (struct smbios_type16 *)*current; @@ -231,7 +231,7 @@ static struct device_operations pci_domain_ops = { .init = NULL, .scan_bus = pci_domain_scan_bus, .ops_pci_bus = pci_bus_default_ops, -#if CONFIG_GENERATE_SMBIOS_TABLES +#if IS_ENABLED(CONFIG_GENERATE_SMBIOS_TABLES) .get_smbios_data = qemu_get_smbios_data, #endif }; -- cgit v1.2.3