From fddf46f275f27b20a05ff761c4e267fd619e9664 Mon Sep 17 00:00:00 2001 From: Jason Schildt Date: Tue, 25 Oct 2005 21:45:17 +0000 Subject: - See Issue Tracker id-12 "lnxi-patch-12". git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2076 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/Iwill/DK8S2/auto.c | 16 ++------ src/mainboard/Iwill/DK8X/auto.c | 15 ++----- src/mainboard/amd/quartet/auto.c | 17 +------- src/mainboard/amd/serenade/auto.c | 16 +------- src/mainboard/amd/solo/auto.c | 20 +-------- src/mainboard/arima/hdama/auto.c | 24 ++++------- src/mainboard/ibm/e325/auto.c | 17 +------- src/mainboard/ibm/e326/auto.c | 17 +------- src/mainboard/island/aruma/auto.c | 55 ++++++++----------------- src/mainboard/newisys/khepri/auto.c | 17 +------- src/mainboard/tyan/s2875/auto.c | 50 +--------------------- src/mainboard/tyan/s2880/auto.c | 45 +------------------- src/mainboard/tyan/s2881/auto.c | 43 +------------------ src/mainboard/tyan/s2882/auto.c | 45 ++------------------ src/mainboard/tyan/s2885/auto.c | 77 +--------------------------------- src/mainboard/tyan/s2891/auto.c | 53 +++--------------------- src/mainboard/tyan/s2892/auto.c | 54 ++---------------------- src/mainboard/tyan/s2895/auto.c | 82 ++----------------------------------- src/mainboard/tyan/s4880/auto.c | 50 +--------------------- src/mainboard/tyan/s4882/auto.c | 74 +-------------------------------- 20 files changed, 68 insertions(+), 719 deletions(-) diff --git a/src/mainboard/Iwill/DK8S2/auto.c b/src/mainboard/Iwill/DK8S2/auto.c index 6c4e8373e5..b771b3f0f1 100644 --- a/src/mainboard/Iwill/DK8S2/auto.c +++ b/src/mainboard/Iwill/DK8S2/auto.c @@ -23,6 +23,8 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" + #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -161,19 +163,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/Iwill/DK8X/auto.c b/src/mainboard/Iwill/DK8X/auto.c index 8e83c3093d..1552324410 100644 --- a/src/mainboard/Iwill/DK8X/auto.c +++ b/src/mainboard/Iwill/DK8X/auto.c @@ -20,9 +20,11 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" + #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -163,18 +165,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c index 638d09b861..6ab2ea8208 100644 --- a/src/mainboard/amd/quartet/auto.c +++ b/src/mainboard/amd/quartet/auto.c @@ -26,6 +26,7 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -212,21 +213,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - nodeid = lapicid() & 0xf; - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - - distinguish_cpu_resets(nodeid); - - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/amd/serenade/auto.c b/src/mainboard/amd/serenade/auto.c index 9a9de15b49..f1104bdb86 100644 --- a/src/mainboard/amd/serenade/auto.c +++ b/src/mainboard/amd/serenade/auto.c @@ -25,6 +25,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -163,20 +164,7 @@ static void main(unsigned long bist) int needs_reset; unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - nodeid = lapicid() & 0xf; - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c index fff604dc35..a9d2404f69 100644 --- a/src/mainboard/amd/solo/auto.c +++ b/src/mainboard/amd/solo/auto.c @@ -23,6 +23,7 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -111,24 +112,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - - enable_lapic(); - init_timer(); - - nodeid = lapicid() & 0xf; - - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - - distinguish_cpu_resets(nodeid); - - if (!boot_cpu()) { - /* This LinuxBIOS image is built for UP only */ - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c index 7790b3ea50..c493e02cc0 100644 --- a/src/mainboard/arima/hdama/auto.c +++ b/src/mainboard/arima/hdama/auto.c @@ -22,6 +22,7 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -135,7 +136,7 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) }; if (maxnodes > 2) { - print_debug("this mainboard is only designed for 2 cpus\r\n"); + print_spew("this mainboard is only designed for 2 cpus\r\n"); maxnodes = 2; } @@ -165,6 +166,8 @@ static inline int spd_read_byte(unsigned device, unsigned address) #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) + + static void main(unsigned long bist) { static const struct mem_controller cpu[] = { @@ -194,21 +197,7 @@ static void main(unsigned long bist) int needs_reset; if (bist == 0) { - unsigned nodeid; - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - nodeid = lapicid() & 0xf; - - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -235,12 +224,13 @@ static void main(unsigned long bist) memreset_setup(); sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); - + #if 0 dump_pci_devices(); #endif #if 0 dump_pci_device(PCI_DEV(0, 0x18, 2)); + dump_pci_device(PCI_DEV(0, 0x18, 3)); #endif #if 0 diff --git a/src/mainboard/ibm/e325/auto.c b/src/mainboard/ibm/e325/auto.c index b1c9e772d5..13a1cae52b 100644 --- a/src/mainboard/ibm/e325/auto.c +++ b/src/mainboard/ibm/e325/auto.c @@ -25,6 +25,7 @@ #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) @@ -161,21 +162,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - - nodeid = lapicid() & 0xf; - - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/ibm/e326/auto.c b/src/mainboard/ibm/e326/auto.c index 1f3aef1c56..e3513d6141 100644 --- a/src/mainboard/ibm/e326/auto.c +++ b/src/mainboard/ibm/e326/auto.c @@ -25,6 +25,7 @@ #include "superio/NSC/pc87366/pc87366_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) @@ -161,21 +162,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - - nodeid = lapicid() & 0xf; - - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/island/aruma/auto.c b/src/mainboard/island/aruma/auto.c index d1899e934a..d5a3591305 100644 --- a/src/mainboard/island/aruma/auto.c +++ b/src/mainboard/island/aruma/auto.c @@ -25,6 +25,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -128,31 +129,7 @@ static void main(unsigned long bist) int needs_reset; if (bist == 0) { - unsigned nodeid; - - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - - nodeid=lapicid() & 0xf; - - -#if ENABLE_APIC_EXT_ID == 1 - enable_apic_ext_id(nodeid); - if(nodeid != 0) { - /* CPU apicid is from 0x10 */ - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) - | (APIC_ID_OFFSET<<24) ) ); - } -#endif - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -173,20 +150,20 @@ static void main(unsigned long bist) print_pci_devices(); #endif -#if (ALLOW_HT_OVERCLOCKING==1) && (USE_FALLBACK_IMAGE==0) - if(read_option(CMOS_VSTART_amdk8_1GHz, CMOS_VLEN_amdk8_1GHz, 0)) - { - print_debug("AMDK8 allowed at 1GHz\r\n"); - } else { - print_debug("AMDK8 allowed at 800Hz only\r\n"); - } - if(read_option(CMOS_VSTART_amd8131_800MHz, CMOS_VLEN_amd8131_800MHz, 0)) - { - print_debug("AMD8131 allowed at 800MHz\r\n"); - } else { - print_debug("AMD8131 allowed at 600Hz only\r\n"); - } -#endif +//#if (ALLOW_HT_OVERCLOCKING==1) && (USE_FALLBACK_IMAGE==0) +// if(read_option(CMOS_VSTART_amdk8_1GHz, CMOS_VLEN_amdk8_1GHz, 0)) +// { +// print_debug("AMDK8 allowed at 1GHz\r\n"); +// } else { +// print_debug("AMDK8 allowed at 800Hz only\r\n"); +// } +// if(read_option(CMOS_VSTART_amd8131_800MHz, CMOS_VLEN_amd8131_800MHz, 0)) +// { +// print_debug("AMD8131 allowed at 800MHz\r\n"); +// } else { +// print_debug("AMD8131 allowed at 600Hz only\r\n"); +// } +//#endif if (needs_reset) { print_info("HyperT reset -\r\n"); soft_reset(); diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c index a076c37a44..61f5aba00d 100644 --- a/src/mainboard/newisys/khepri/auto.c +++ b/src/mainboard/newisys/khepri/auto.c @@ -23,6 +23,7 @@ #include "superio/NSC/pc87360/pc87360_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -111,21 +112,7 @@ static void main(unsigned long bist) unsigned nodeid; if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - enable_lapic(); - init_timer(); - - nodeid = lapicid() & 0xf; - - /* Has this cpu already booted? */ - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); - if (!boot_cpu()) { - stop_this_cpu(); - } + k8_init_and_stop_secondaries(); } /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); diff --git a/src/mainboard/tyan/s2875/auto.c b/src/mainboard/tyan/s2875/auto.c index 7b75db20ab..d26e5a5f63 100644 --- a/src/mainboard/tyan/s2875/auto.c +++ b/src/mainboard/tyan/s2875/auto.c @@ -24,6 +24,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -112,11 +113,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" #include "northbridge/amd/amdk8/resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -149,47 +145,8 @@ static void main(unsigned long bist) int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); -// start_other_core(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -202,9 +159,6 @@ static void main(unsigned long bist) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); if (needs_reset) { print_info("ht reset -\r\n"); diff --git a/src/mainboard/tyan/s2880/auto.c b/src/mainboard/tyan/s2880/auto.c index 2532386132..b8ce483fc0 100644 --- a/src/mainboard/tyan/s2880/auto.c +++ b/src/mainboard/tyan/s2880/auto.c @@ -24,6 +24,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -149,46 +150,8 @@ static void main(unsigned long bist) }; int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif - if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -201,10 +164,6 @@ static void main(unsigned long bist) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif - needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); if (needs_reset) { print_info("ht reset -\r\n"); diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c index fc622793d3..eb1e382ee3 100644 --- a/src/mainboard/tyan/s2881/auto.c +++ b/src/mainboard/tyan/s2881/auto.c @@ -24,6 +24,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -114,11 +115,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -156,39 +152,7 @@ static void main(unsigned long bist) #endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -200,9 +164,6 @@ static void main(unsigned long bist) setup_s2881_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); if (needs_reset) { diff --git a/src/mainboard/tyan/s2882/auto.c b/src/mainboard/tyan/s2882/auto.c index 910db9e8a5..7edb666b9c 100644 --- a/src/mainboard/tyan/s2882/auto.c +++ b/src/mainboard/tyan/s2882/auto.c @@ -24,6 +24,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -113,11 +114,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -160,40 +156,8 @@ static void main(unsigned long bist) #endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } - } + k8_init_and_stop_secondaries(); + } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); @@ -204,9 +168,6 @@ static void main(unsigned long bist) setup_default_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif needs_reset |= ht_setup_chains_x(); if (needs_reset) { print_info("ht reset -\r\n"); diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index 8275f6d5d7..f4f30737ab 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -23,6 +23,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -121,13 +122,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -160,72 +154,9 @@ static void main(unsigned long bist) }; int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); - - id = get_node_core_id_x(); // that is initid - #if ENABLE_APIC_EXT_ID == 1 - if(id.coreid == 0) { - enable_apic_ext_id(id.nodeid); - } - #endif -#else - nodeid = get_node_id(); - #if ENABLE_APIC_EXT_ID == 1 - enable_apic_ext_id(nodeid); - #endif -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if( id.nodeid != 0 ) //all except cores in node0 - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); - #endif - - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } - -#else - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if(nodeid != 0) - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 - - #endif - - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -238,10 +169,6 @@ static void main(unsigned long bist) setup_s2885_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif - // automatically set that for you, but you might meet tight space needs_reset |= ht_setup_chains_x(); diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c index 4637b4e9c6..be81f89e11 100644 --- a/src/mainboard/tyan/s2891/auto.c +++ b/src/mainboard/tyan/s2891/auto.c @@ -26,6 +26,7 @@ #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #include "northbridge/amd/amdk8/setup_resource_map.c" @@ -77,11 +78,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -125,45 +121,10 @@ static void main(unsigned long bist) #endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - post_code(0x31); - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } - post_code(0x32); + // post_code(0x32); w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); @@ -175,12 +136,8 @@ static void main(unsigned long bist) setup_s2891_resource_map(); needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - needs_reset |= ht_setup_chains_x(); + + needs_reset |= ht_setup_chains_x(); needs_reset |= ck804_early_setup_x(); diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c index 25967056de..1d19ecfafc 100644 --- a/src/mainboard/tyan/s2892/auto.c +++ b/src/mainboard/tyan/s2892/auto.c @@ -26,6 +26,7 @@ #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #include "northbridge/amd/amdk8/setup_resource_map.c" @@ -76,11 +77,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) @@ -125,47 +121,9 @@ static void main(unsigned long bist) }; int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); -// start_other_core(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } @@ -179,12 +137,8 @@ static void main(unsigned long bist) setup_s2892_resource_map(); needs_reset = setup_coherent_ht_domain(); - -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - needs_reset |= ht_setup_chains_x(); + + needs_reset |= ht_setup_chains_x(); needs_reset |= ck804_early_setup_x(); diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c index 0a26f21735..8c11f30fa7 100644 --- a/src/mainboard/tyan/s2895/auto.c +++ b/src/mainboard/tyan/s2895/auto.c @@ -28,6 +28,7 @@ #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" @@ -106,12 +107,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif #define FIRST_CPU 1 #define SECOND_CPU 1 @@ -163,79 +158,12 @@ static void main(unsigned long bist) }; int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); - - id = get_node_core_id_x(); // that is initid - #if ENABLE_APIC_EXT_ID == 1 - if(id.coreid == 0) { - enable_apic_ext_id(id.nodeid); - } - #endif -#else - nodeid = get_node_id(); - #if ENABLE_APIC_EXT_ID == 1 - enable_apic_ext_id(nodeid); - #endif -#endif - - enable_lapic(); - init_timer(); - - post_code(0x30); - -#if CONFIG_LOGICAL_CPUS==1 - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if( id.nodeid != 0 ) //all except cores in node0 - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); - #endif - - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } - -#else - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if(nodeid != 0) - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 - - #endif - - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - post_code(0x31); - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } - post_code(0x32); + // post_code(0x32); lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); @@ -249,10 +177,6 @@ static void main(unsigned long bist) setup_s2895_resource_map(); needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif needs_reset |= ht_setup_chains_x(); diff --git a/src/mainboard/tyan/s4880/auto.c b/src/mainboard/tyan/s4880/auto.c index 3e0d4825df..bcabf22eef 100644 --- a/src/mainboard/tyan/s4880/auto.c +++ b/src/mainboard/tyan/s4880/auto.c @@ -24,6 +24,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -125,11 +126,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 @@ -202,47 +198,9 @@ static void main(unsigned long bist) }; int i; int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - id = get_node_core_id_x(); - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); -// start_other_core(id.nodeid); - } -#else - nodeid = lapicid(); - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -256,10 +214,6 @@ static void main(unsigned long bist) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - start_other_cores(); -#endif - needs_reset |= ht_setup_chains_x(); if (needs_reset) { diff --git a/src/mainboard/tyan/s4882/auto.c b/src/mainboard/tyan/s4882/auto.c index e8d46e7961..ba58af9d63 100644 --- a/src/mainboard/tyan/s4882/auto.c +++ b/src/mainboard/tyan/s4882/auto.c @@ -23,6 +23,7 @@ #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" +#include "cpu/amd/dualcore/dualcore.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) @@ -129,13 +130,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) /* tyan does not want the default */ #include "resourcemap.c" -#if CONFIG_LOGICAL_CPUS==1 -#define SET_NB_CFG_54 1 -#include "cpu/amd/dualcore/dualcore.c" -#else -#include "cpu/amd/model_fxx/node_id.c" -#endif - #define FIRST_CPU 1 #define SECOND_CPU 1 @@ -208,68 +202,9 @@ static void main(unsigned long bist) }; int i; int needs_reset; -#if CONFIG_LOGICAL_CPUS==1 - struct node_core_id id; -#else - unsigned nodeid; -#endif if (bist == 0) { - /* Skip this if there was a built in self test failure */ - amd_early_mtrr_init(); - -#if CONFIG_LOGICAL_CPUS==1 - set_apicid_cpuid_lo(); - - id = get_node_core_id_x(); // that is initid - #if ENABLE_APIC_EXT_ID == 1 - if(id.coreid == 0) { - enable_apic_ext_id(id.nodeid); - } - #endif -#else - nodeid = get_node_id(); - #if ENABLE_APIC_EXT_ID == 1 - enable_apic_ext_id(nodeid); - #endif -#endif - - enable_lapic(); - init_timer(); - -#if CONFIG_LOGICAL_CPUS==1 - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if( id.nodeid != 0 ) //all except cores in node0 - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); - #endif - if(id.coreid == 0) { - if (cpu_init_detected(id.nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(id.nodeid); - } -#else - #if ENABLE_APIC_EXT_ID == 1 - #if LIFT_BSP_APIC_ID == 0 - if(nodeid != 0) - #endif - lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10 - #endif - if (cpu_init_detected(nodeid)) { - asm volatile ("jmp __cpu_reset"); - } - distinguish_cpu_resets(nodeid); -#endif - - if (!boot_cpu() -#if CONFIG_LOGICAL_CPUS==1 - || (id.coreid != 0) -#endif - ) { - stop_this_cpu(); // it will stop all cores except core0 of cpu0 - } + k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); @@ -283,11 +218,6 @@ static void main(unsigned long bist) needs_reset = setup_coherent_ht_domain(); -#if CONFIG_LOGICAL_CPUS==1 - // It is said that we should start core1 after all core0 launched - start_other_cores(); -#endif - needs_reset |= ht_setup_chains_x(); if (needs_reset) { print_info("ht reset -\r\n"); -- cgit v1.2.3