From ea98989e2c6c734bf39239cfd77a540dbe11ab0d Mon Sep 17 00:00:00 2001 From: Wim Vervoorn Date: Thu, 10 Oct 2019 16:41:32 +0200 Subject: Documentation/mainboard/facebook: Add rev 1.3 Add rev 1.3 of the fbg1701 board. This adds Kingston memory. BUG=none TEST=none Change-Id: Iaba6f28368e2e4ca412122b5fa28ed93c705f4df Signed-off-by: Wim Vervoorn Reviewed-on: https://review.coreboot.org/c/coreboot/+/35955 Tested-by: build bot (Jenkins) Reviewed-by: Frans Hendriks Reviewed-by: Paul Menzel --- Documentation/mainboard/facebook/fbg1701.md | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) mode change 100644 => 100755 Documentation/mainboard/facebook/fbg1701.md (limited to 'Documentation/mainboard') diff --git a/Documentation/mainboard/facebook/fbg1701.md b/Documentation/mainboard/facebook/fbg1701.md old mode 100644 new mode 100755 index 89e8a6abbc..e59627721a --- a/Documentation/mainboard/facebook/fbg1701.md +++ b/Documentation/mainboard/facebook/fbg1701.md @@ -5,16 +5,17 @@ This page describes how to run coreboot on the Facebook FBG1701. FBG1701 are assembled with different onboard memory modules: Rev 1.0 Onboard Samsung K4B8G1646D-MYKO memory Rev 1.1 and 1.2 Onboard Micron MT41K512M16HA-125A memory + Rev 1.3 Onboard Kingston B5116ECMDXGGB memory -Use make menuconfig to configure `onboard memory manufacturer` in Mainboard -menu. +Use make menuconfig to configure `onboard memory manufacturer Samsung` in +Mainboard menu. ## Required blobs This board currently requires: fsp blob 3rdparty/fsp/BraswellFspBinPkg/FspBin/BSWFSP.fd Microcode Intel Braswell cpuid 1046C4 version 410 - (Used pre-build binary retrieved from Intel site) + (Used pre-built binary retrieved from Intel site) ## Flashing coreboot @@ -25,7 +26,7 @@ The main SPI flash can be accessed using [flashrom]. ### External programming The system has an internal flash chip which is a 8 MiB soldered SOIC-8 chip. -This chip is located to the top middle side of the board. It's located +This chip is located on the top middle side of the board. It's located between SoC and Q7 connector. Use clip (or solder wires) to program the chip. Specifically, it's a Winbond W25Q64FW (1.8V), whose datasheet can be found -- cgit v1.2.3