From e79595def5023527c043479a30e0755efc95d703 Mon Sep 17 00:00:00 2001 From: Nico Huber Date: Wed, 12 Jun 2013 16:06:08 +0200 Subject: libpayload: Use interrupt transfers for USB hubs In interactive payloads, the USB stack's poll procedure is implicitly called from the UI loop. Since all USB control transfers are handled synchronously, polling hubs with these slows the UI significantly down. So switch to interrupt transfers that are done asynchronously and only perform control transfers when the hub reported a status change. We use the interrupt endpoint's max packet size instead of the theo- retical transfer length of `(bNrPorts + 1) / 8` as Linux' code mentions hubs that return too much data. Change-Id: I5af02d63e4b8e1451b160b77f3611b93658a7a48 Signed-off-by: Nico Huber Reviewed-on: https://review.coreboot.org/c/coreboot/+/18499 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner --- payloads/libpayload/drivers/usb/usbhub.c | 158 +++++++++++++++++++++++++++++-- 1 file changed, 148 insertions(+), 10 deletions(-) (limited to 'payloads/libpayload/drivers/usb') diff --git a/payloads/libpayload/drivers/usb/usbhub.c b/payloads/libpayload/drivers/usb/usbhub.c index 78643c0e70..87c58169c5 100644 --- a/payloads/libpayload/drivers/usb/usbhub.c +++ b/payloads/libpayload/drivers/usb/usbhub.c @@ -35,15 +35,39 @@ /* assume that host_to_device is overwritten if necessary */ #define DR_PORT gen_bmRequestType(host_to_device, class_type, other_recp) /* status (and status change) bits */ -#define PORT_CONNECTION 0x1 -#define PORT_ENABLE 0x2 -#define PORT_RESET 0x10 +#define PORT_CONNECTION 0x01 +#define PORT_ENABLE 0x02 +#define PORT_SUSPEND 0x04 +#define PORT_OVER_CURRENT 0x08 +#define PORT_RESET 0x10 +#define BH_PORT_RESET 0x20 +#define PORT_LINK_STATE 0x40 +#define PORT_CONFIG_ERROR 0x80 /* feature selectors (for setting / clearing features) */ -#define SEL_PORT_RESET 0x4 -#define SEL_PORT_POWER 0x8 -#define SEL_C_PORT_CONNECTION 0x10 +#define SEL_PORT_RESET 0x04 +#define SEL_PORT_POWER 0x08 +#define SEL_C_PORT_CONNECTION 0x10 +#define SEL_C_PORT_ENABLE 0x11 +#define SEL_C_PORT_SUSPEND 0x12 +#define SEL_C_PORT_OVER_CURRENT 0x13 +#define SEL_C_PORT_RESET 0x14 +#define SEL_C_PORT_LINK_STATE 0x19 +#define SEL_C_PORT_CONFIG_ERROR 0x1a +#define SEL_C_BH_PORT_RESET 0x1d /* request type (USB 3.0 hubs only) */ -#define SET_HUB_DEPTH 12 +#define SET_HUB_DEPTH 12 + +static endpoint_t * +usb_hub_interrupt_ep(usbdev_t *const dev) +{ + int i; + for (i = 0; i < dev->num_endp; ++i) { + if (dev->endpoints[i].type == INTERRUPT && + dev->endpoints[i].direction == IN) + return &dev->endpoints[i]; + } + return NULL; +} static int usb_hub_port_status_changed(usbdev_t *const dev, const int port) @@ -169,13 +193,99 @@ usb_hub_port_initialize(usbdev_t *const dev, const int port) return; if (buf[1] & PORT_CONNECTION) clear_feature(dev, port, SEL_C_PORT_CONNECTION, DR_PORT); - if (buf[0] & PORT_CONNECTION) + if (buf[0] & PORT_CONNECTION) { + usb_debug("usbhub: Port coldplug at %d\n", port); generic_hub_scanport(dev, port); + } +} + +static int +usb_hub_handle_port_change(usbdev_t *const dev, const int port) +{ + static const struct { + unsigned short change_bit; + unsigned short clear_sel; + } change_bits[] = { + { PORT_CONNECTION, SEL_C_PORT_CONNECTION }, + { PORT_ENABLE, SEL_C_PORT_ENABLE }, + { PORT_SUSPEND, SEL_C_PORT_SUSPEND }, + { PORT_OVER_CURRENT, SEL_C_PORT_OVER_CURRENT }, + { PORT_RESET, SEL_C_PORT_RESET }, + { BH_PORT_RESET, SEL_C_BH_PORT_RESET }, + { PORT_LINK_STATE, SEL_C_PORT_LINK_STATE }, + { PORT_CONFIG_ERROR, SEL_C_PORT_CONFIG_ERROR }, + }; + int ret = 0; + unsigned int i; + unsigned short checked_bits = 0; + unsigned short buf[2] = { 0, 0 }; + + ret = get_status(dev, port, DR_PORT, sizeof(buf), buf); + if (ret < 0) + return ret; + + /* + * Second word holds the change bits. The interrupt transfer shows + * a logical or of these bits, so we have to clear them all. + */ + for (i = 0; i < ARRAY_SIZE(change_bits); ++i) { + if (buf[1] & change_bits[i].change_bit) + clear_feature(dev, port, change_bits[i].clear_sel, DR_PORT); + checked_bits |= change_bits[i].change_bit; + } + if (buf[1] & ~checked_bits) + usb_debug("usbhub: Spurious change bit at port %d\n", port); + + /* Now, handle connection changes. */ + if (buf[1] & PORT_CONNECTION) { + usb_debug("usbhub: Port change at %d\n", port); + ret = generic_hub_scanport(dev, port); + } + return ret; +} + +static void +usb_hub_poll(usbdev_t *const dev) +{ + unsigned int port, i; + u8 buf[32] = { 0 }; + const u8 *ibuf; + + /* First, gather all change bits from finished interrupt transfers. */ + const size_t port_bytes = MIN(ARRAY_SIZE(buf), + div_round_up(GEN_HUB(dev)->num_ports + 1, 8)); + while ((ibuf = dev->controller->poll_intr_queue(GEN_HUB(dev)->data))) { + for (i = 0; i < port_bytes; ++i) + buf[i] |= ibuf[i]; + } + + for (port = 1; port <= GEN_HUB(dev)->num_ports; ++port) { + /* ports start at bit1; bit0 is hub status change */ + if (buf[port / 8] & (1 << (port % 8))) { + if (usb_hub_handle_port_change(dev, port) < 0) + return; + } + } +} + +static void +usb_hub_destroy(usbdev_t *const dev) +{ + endpoint_t *const intr_ep = usb_hub_interrupt_ep(dev); + dev->controller->destroy_intr_queue(intr_ep, GEN_HUB(dev)->data); + generic_hub_destroy(dev); } void usb_hub_init(usbdev_t *const dev) { + endpoint_t *const intr_ep = usb_hub_interrupt_ep(dev); + if (!intr_ep) { + usb_debug("usbhub: ERROR: No interrupt-in endpoint found\n"); + return; + } + + /* Get number of ports from hub decriptor */ int type = is_usb_speed_ss(dev->speed) ? 0x2a : 0x29; /* similar enough */ hub_descriptor_t desc; /* won't fit the whole thing, we don't care */ if (get_descriptor(dev, gen_bmRequestType(device_to_host, class_type, @@ -187,10 +297,38 @@ usb_hub_init(usbdev_t *const dev) if (is_usb_speed_ss(dev->speed)) usb_hub_set_hub_depth(dev); - if (generic_hub_init(dev, desc.bNbrPorts, &usb_hub_ops) < 0) + + /* + * Register interrupt transfer: + * one bit per port + one bit for the hub, + * 20 transfers in the queue, like our HID driver, + * one transfer per 256ms + */ + void *const intrq = dev->controller->create_intr_queue( + intr_ep, intr_ep->maxpacketsize, 20, 256); + if (!intrq) { + usb_detach_device(dev->controller, dev->address); + return; + } + + /* + * Limit the number of ports by the max packet size of + * the interrupt endpoint. This shouldn't be necessary + * but prevents a potential overflow in usb_hub_poll(). + */ + const unsigned int num_ports = + MIN(desc.bNbrPorts, intr_ep->maxpacketsize * 8 - 1); + if (generic_hub_init(dev, num_ports, &usb_hub_ops)) { + dev->controller->destroy_intr_queue(intr_ep, intrq); + usb_detach_device(dev->controller, dev->address); return; + } int port; - for (port = 1; port <= GEN_HUB(dev)->num_ports; ++port) + for (port = 1; port <= num_ports; ++port) usb_hub_port_initialize(dev, port); + + GEN_HUB(dev)->data = intrq; + dev->poll = usb_hub_poll; + dev->destroy = usb_hub_destroy; } -- cgit v1.2.3