From 93a8b27cbed8a288ee6a65436ec22ad5a67fdbd0 Mon Sep 17 00:00:00 2001 From: Anton Kochkov Date: Wed, 26 Sep 2012 22:31:04 +0400 Subject: libpayload: Set 8bits per char for serial port Previously we assume that hardware using 8 bits per char by default, but on Asrock A53 Pro this is not true (7 bit per char by default). Forcing use 8n1 now. Change-Id: Ib701725d2ec6dacd7862016b2045270956b27029 Signed-off-by: Anton Kochkov Reviewed-on: http://review.coreboot.org/1541 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- payloads/libpayload/drivers/serial.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'payloads/libpayload') diff --git a/payloads/libpayload/drivers/serial.c b/payloads/libpayload/drivers/serial.c index c6804d2b2a..0f79b52c89 100644 --- a/payloads/libpayload/drivers/serial.c +++ b/payloads/libpayload/drivers/serial.c @@ -40,8 +40,6 @@ static void serial_io_hardware_init(int port, int speed, int word_bits, int pari { unsigned char reg; - /* We will assume 8n1 for now. Does anyone use anything else these days? */ - /* Disable interrupts. */ outb(0, port + 0x01); @@ -56,8 +54,9 @@ static void serial_io_hardware_init(int port, int speed, int word_bits, int pari outb(DIVISOR(speed) & 0xFF, port); outb(DIVISOR(speed) >> 8 & 0xFF, port + 1); - /* Restore the previous value of the divisor. */ - outb(reg & ~0x80, port + 0x03); + /* Restore the previous value of the divisor. + * And set 8 bits per character */ + outb((reg & ~0x80) | 3, port + 0x03); } static void serial_mem_hardware_init(int port, int speed, int word_bits, int parity, int stop_bits) @@ -80,8 +79,9 @@ static void serial_mem_hardware_init(int port, int speed, int word_bits, int par writeb(DIVISOR(speed) & 0xFF, MEMBASE); writeb(DIVISOR(speed) >> 8 & 0xFF, MEMBASE + 1); - /* Restore the previous value of the divisor. */ - writeb(reg & ~0x80, MEMBASE + 0x03); + /* Restore the previous value of the divisor. + * And set 8 bits per character */ + writeb((reg & ~0x80) | 3, MEMBASE + 0x03); } #endif -- cgit v1.2.3