From d5d024f3e5f0eb88e459b3a449337c3cd2a49104 Mon Sep 17 00:00:00 2001 From: Nico Huber Date: Mon, 21 May 2012 16:20:59 +0200 Subject: libpayload: Bring USB hub driver to a working state This adds proper device attachment and detachment detection and port enable- ment to the USB hub driver. Support for split transactions is still missing, so this works only with USB2.0 devices on hubs in USB2.0 mode and USB1.1 devices on hubs in USB1.1 mode. Change-Id: I80bf03f3117116a60382b87a4f84366370649915 Signed-off-by: Nico Huber Reviewed-on: http://review.coreboot.org/1080 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- payloads/libpayload/drivers/usb/usbhub.c | 76 +++++++++++++++++++++++--------- 1 file changed, 55 insertions(+), 21 deletions(-) (limited to 'payloads/libpayload') diff --git a/payloads/libpayload/drivers/usb/usbhub.c b/payloads/libpayload/drivers/usb/usbhub.c index 08042a2b9f..09ab9ccb29 100644 --- a/payloads/libpayload/drivers/usb/usbhub.c +++ b/payloads/libpayload/drivers/usb/usbhub.c @@ -31,8 +31,16 @@ // assume that host_to_device is overwritten if necessary #define DR_PORT gen_bmRequestType(host_to_device, class_type, other_recp) -#define PORT_RESET 0x4 -#define PORT_POWER 0x8 +/* status bits */ +#define PORT_CONNECTION 0x1 +#define PORT_ENABLE 0x2 +#define PORT_RESET 0x10 +/* status change bits */ +#define C_PORT_CONNECTION 0x1 +/* feature selectors (for setting / clearing features) */ +#define SEL_PORT_RESET 0x4 +#define SEL_PORT_POWER 0x8 +#define SEL_C_PORT_CONNECTION 0x10 typedef struct { int num_ports; @@ -53,28 +61,54 @@ usb_hub_destroy (usbdev_t *dev) static void usb_hub_scanport (usbdev_t *dev, int port) { - unsigned short buf[2]; + int timeout; + unsigned short buf[2]; get_status (dev, port, DR_PORT, 4, buf); - int portstatus = ((buf[0] & 1) == 0); - int datastatus = (HUB_INST (dev)->ports[port] == -1); - if (portstatus == datastatus) - return; // no change - FIXME: read right fields for that test - - if (!datastatus) { - int devno = HUB_INST (dev)->ports[port]; - if (devno == -1) - fatal ("FATAL: illegal devno!\n"); + if (!(buf[1] & C_PORT_CONNECTION)) + /* no change */ + return; + + /* clear Port Connection status change */ + clear_feature (dev, port, SEL_C_PORT_CONNECTION, DR_PORT); + + int devno = HUB_INST (dev)->ports[port]; + if (devno != -1) { + /* detach device, either because of re-/ or disconnect */ usb_detach_device(dev->controller, devno); HUB_INST (dev)->ports[port] = -1; - return; } - set_feature (dev, port, PORT_RESET, DR_PORT); - mdelay (20); + if (!(buf[0] & PORT_CONNECTION)) + /* no device connected, nothing to do */ + return; - get_status (dev, port, DR_PORT, 4, buf); + /* wait 100ms for port to become stable */ + mdelay (100); // usb20 spec 9.1.2 + /* reset port */ + set_feature (dev, port, SEL_PORT_RESET, DR_PORT); + /* wait at least 10ms (usb2.0 spec 11.5.1.5: 10ms to 20ms) */ + mdelay (10); + /* wait for hub to finish reset */ + timeout = 30; /* time out after 10ms (spec) + 20ms (kindly) */ + do { + get_status (dev, port, DR_PORT, 4, buf); + mdelay(1); timeout--; + } while ((buf[0] & PORT_RESET) && timeout); + if (!timeout) + debug("Warning: usbhub: port reset timed out.\n"); + + /* wait for port to be enabled. the hub is responsible for this */ + timeout = 500; /* time out after 500ms */ + do { + get_status (dev, port, DR_PORT, 4, buf); + mdelay(1); timeout--; + } while (!(buf[0] & PORT_ENABLE) && timeout); + if (!timeout) + debug("Warning: usbhub: port enabling timed out.\n"); + + get_status (dev, port, DR_PORT, 4, buf); /* bit 10 9 * 0 0 full speed * 0 1 low speed @@ -83,6 +117,9 @@ usb_hub_scanport (usbdev_t *dev, int port) int speed = ((buf[0] >> 9) & 3) ; HUB_INST (dev)->ports[port] = usb_attach_device(dev->controller, dev->address, port, speed); + + /* clear Port Connection status change */ + clear_feature (dev, port, SEL_C_PORT_CONNECTION, DR_PORT); } static int @@ -92,10 +129,7 @@ usb_hub_report_port_changes (usbdev_t *dev) unsigned short buf[2]; for (port = 1; port <= HUB_INST (dev)->num_ports; port++) { get_status (dev, port, DR_PORT, 4, buf); - // FIXME: proper change detection - int portstatus = ((buf[0] & 1) == 0); - int datastatus = (HUB_INST (dev)->ports[port] == -1); - if (portstatus != datastatus) + if (buf[1] & C_PORT_CONNECTION) return port; } @@ -106,7 +140,7 @@ usb_hub_report_port_changes (usbdev_t *dev) static void usb_hub_enable_port (usbdev_t *dev, int port) { - set_feature (dev, port, PORT_POWER, DR_PORT); + set_feature (dev, port, SEL_PORT_POWER, DR_PORT); mdelay (20); } -- cgit v1.2.3