From bc46ac5c7d78e9bf552482382a168a509c7537d9 Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Sun, 5 Jun 2016 10:30:34 -0600 Subject: SeaBIOS: Add option to include a bootorder file in cbfs Including the SeaBIOS bootorder file seems to be a fairly common desire, so let's make it easy. Change-Id: Ib0874dee46215287b09c0b52648072ef3ff06ec5 Signed-off-by: Martin Roth Reviewed-on: https://review.coreboot.org/15076 Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh --- payloads/external/Makefile.inc | 7 +++++++ payloads/external/SeaBIOS/Kconfig | 16 ++++++++++++++++ 2 files changed, 23 insertions(+) (limited to 'payloads') diff --git a/payloads/external/Makefile.inc b/payloads/external/Makefile.inc index 65b3dd2fb4..f070bb486c 100644 --- a/payloads/external/Makefile.inc +++ b/payloads/external/Makefile.inc @@ -85,6 +85,13 @@ payloads/external/SeaBIOS/seabios/out/vgabios.bin: seabios payloads/external/SeaBIOS/seabios/.config: payloads/external/SeaBIOS/seabios/out/bios.bin.elf payloads/external/SeaBIOS/seabios/out/autoversion.h: payloads/external/SeaBIOS/seabios/out/bios.bin.elf +# add a SeaBIOS bootorder file +ifneq ($(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)),) +cbfs-files-y += bootorder +bootorder-file := $(strip $(CONFIG_SEABIOS_BOOTORDER_FILE)) +bootorder-type := raw +endif + payloads/external/depthcharge/depthcharge/build/depthcharge.elf depthcharge: $(top)/$(DOTCONFIG) $(CBFSTOOL) $(MAKE) -C payloads/external/depthcharge \ BOARD=$(call ws_to_under,$(call strip_quotes,$(call tolower,$(CONFIG_MAINBOARD_PART_NUMBER)))) \ diff --git a/payloads/external/SeaBIOS/Kconfig b/payloads/external/SeaBIOS/Kconfig index 94aac8f46f..abfd291330 100644 --- a/payloads/external/SeaBIOS/Kconfig +++ b/payloads/external/SeaBIOS/Kconfig @@ -70,6 +70,22 @@ config PAYLOAD_CONFIGFILE SeaBIOS payload. In general, if the option is used, the default would be "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios" +config SEABIOS_BOOTORDER_FILE + string "SeaBIOS bootorder file" + default "" + help + Add a SeaBIOS bootorder file. From the wiki: + "The bootorder file may be used to configure the boot up order. The file + should be ASCII text and contain one line per boot method. The description + of each boot method follows an Open Firmware device path format. SeaBIOS + will attempt to boot from each item in the file - first line of the file + first." + + See: https://www.coreboot.org/SeaBIOS#Configuring_boot_order + + If used, a typical value would be: + $(top)/src/mainboard/$(MAINBOARDDIR)/bootorder + config PAYLOAD_FILE default "payloads/external/SeaBIOS/seabios/out/bios.bin.elf" -- cgit v1.2.3