From 168b11bc416eb0931581cc674a60bc53861081c3 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Wed, 7 Oct 2009 16:15:40 +0000 Subject: Various Kconfig fixes and improvements: - Add helps texts to multiple user-visible Kconfig options. - Improve some menu and option names. - PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down (instead of up) when changing "no payload" to "ELF payload" (more intuitive, IMHO). - s/cbfs/cbfstool/. - Add some TODO items where needed. - Put GDB_STUB in a "Debugging" menu, no options should be top-level. There'll be more debug options later, I'm pretty sure. - Start converting help texts which are not user-visible to #-comments. - Re-order some options for more intuitive menus. - Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them. - "Maximum reboot count" should proabably not be user-selectable, or at most if CONFIG_EXPERT (yet to be added) is enabled. It does definately not need its own "Misc options" menu. - Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to run option ROMs. Signed-off-by: Uwe Hermann Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/console/Kconfig | 67 +++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 55 insertions(+), 12 deletions(-) (limited to 'src/console/Kconfig') diff --git a/src/console/Kconfig b/src/console/Kconfig index 697e3587fe..2bdffc1aff 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -1,53 +1,96 @@ menu "Console options" +# TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete. config CONSOLE_SERIAL8250 - #TODO Rename to SERIAL_CONSOLE once Kconfig transition is complete. - bool "See output on the serial port console" + bool "Enable serial port console output" default y + help + Send coreboot debug output to a serial port console. -config SERIAL_POST - bool "See POST output on the serial port console" - default n - +# TODO: COM1, COM2 etc. config TTYS0_BASE hex "I/O base for the serial port" depends on CONSOLE_SERIAL8250 default 0x3f8 config SERIAL_SET_SPEED - bool "Override the serial console BAUD rate" + bool "Override the serial port BAUD rate" default y depends on CONSOLE_SERIAL8250 config TTYS0_BAUD - int "Serial console BAUD rate" + int "Serial port BAUD rate" depends on SERIAL_SET_SPEED default 115200 +# TODO: Allow user-friendly selection of settings other than 8n1. config TTYS0_LCS int default 3 depends on CONSOLE_SERIAL8250 +config SERIAL_POST + bool "Enable POST output on the serial port console" + depends on CONSOLE_SERIAL8250 + default n + help + If enabled, coreboot will additionally print POST codes (which are + usually displayed using a so-called "POST card" ISA/PCI/PCI-E + device) on the serial console. + +# TODO: FIX DEPENDENCY HERE config USBDEBUG_DIRECT - bool "USB debug dongle support. Not supported on all chipsets." + bool "USB 2.0 EHCI debug dongle support" default n - # TODO: FIX DEPENDENCY HERE + help + This option allows you to use a so-called USB EHCI Debug device + to retrieve the coreboot debug messages (instead, or in addition + to, a serial port). + + This feature is NOT supported on all chipsets in coreboot! + + It also requires a USB2 controller which supports the EHCI + Debug Port capability. Controllers which are known to work: + + * 10b9:5239 ALi Corporation USB 2.0 (USB PCI card) + * 8086:24cd Intel ICH4/ICH4-M + * 8086:24dd Intel ICH5 + * 8086:265c Intel ICH6 + * 8086:268c Intel 631xESB/632xESB/3100 + * 8086:27cc Intel ICH7 + * 8086:2836 Intel ICH8 + * 8086:283a Intel ICH8 + * 8086:293a Intel ICH9 + * 10de:0088 NVIDIA MCP2A + * 10de:005b NVIDIA CK804 + * 10de:026e NVIDIA MCP51 + * 10de:036d NVIDIA MCP55 + * 10de:03f2 NVIDIA MCP61 + * 1002:4386 ATI/AMD SB600 + * 1106:3104 VIA VX800 + + See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list. config CONSOLE_VGA - bool "Use VGA console, once initialized." + bool "Use VGA console once initialized" default n +# TODO: Deps? +# TODO: Improve description. config CONSOLE_VGA_ONBOARD_AT_FIRST - bool "Use onboard VGA as primary" + bool "Use onboard VGA as primary video device" default n help If not selected, the last adapter found will be used. +# TODO: User-friendly "choice" selection. +# TODO: Add help text. config MAXIMUM_CONSOLE_LOGLEVEL int "Maximum console loglevel" default 9 +# TODO: User-friendly "choice" selection. +# TODO: Add help text. config DEFAULT_CONSOLE_LOGLEVEL int "Default console loglevel" default 9 -- cgit v1.2.3