From b6711723208e35451f1f65910a50e8c2a3f6eb3b Mon Sep 17 00:00:00 2001 From: Xavi Drudis Ferran Date: Mon, 28 Feb 2011 03:59:34 +0000 Subject: Improving BKDG implementation of P-states, CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. I don't understand what this was doing nor find docs for these regs Maybe it was left over from some copy & paste ? Signed-off-by: Xavi Drudis Ferran Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6411 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_10xxx/fidvid.c | 85 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) (limited to 'src/cpu/amd') diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index bbcfa28e06..6cbd096f67 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -16,8 +16,93 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* + * This file initializes the CPU cores for voltage and frequency settings + * in the different power states. + */ +/* + +checklist (functions are in this file if no source file named) +Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010 + +2.4.2.6 Requirements for p-states + +1.- F3x[84:80] According to table 100 : prep_fid_change + +2.- COF/VID : + 2.4.2.9.1 Steps 1,3-6 and warning for 2,7 if they apply + fixPsNbVidBeforeWR(...) + 2.4.2.9.1 Step 8 enable_fid_change + We do this for all nodes, I don't understand BKDG 100% on + whether this is or isn't meant by "on the local + processor". Must be OK. + 2.4.2.9.1 Steps 9-10 (repeat 1-7 and reset) romstage.c/init_cpus ? + 2.4.2.9.1 Steps 11-12 init_fidvid_stage2 + 2.4.2.9.2 DualPlane PVI : Not supported, don't know how to detect, + needs specific circuitry. + +3.- 2.4.2.7 dualPlaneOnly(dev) + +4.- 2.4.2.8 applyBoostFIDOffset(dev) + +5.- enableNbPState1(dev) + +6.- 2.4.1.7 + a) UpdateSinglePlaneNbVid() + b) setVSRamp(), called from prep_fid_change + c) prep_fid_change + d) improperly, for lack of voltage regulator details?, + F3xA0[PsiVidEn] in defaults.h + F3xA0[PsiVid] in init_cpus.c AMD_SetupPSIVID_d (before prep_fid_change) + +7.- TODO (Core Performance Boost is only available in revision E cpus, and we + don't seem to support those yet, at least they don't have any + constant in amddefs.h ) + +8.- FIXME ? Transition to min Pstate according to 2.4.2.15.3 is required + by 2.4.2.6 after warm reset. But 2.4.2.15 states that it is not required + if the warm reset is issued by coreboot to update NbFid. So it is required + or not ? How can I tell who issued warm reset ? + Coreboot transitions to P0 instead, which is not recommended, and does + not follow 2.4.2.15.2 to do so. + +9.- TODO Requires information on current delivery capability + (depends on mainboard and maybe power supply ?). One might use a config + option with the maximum number of Ampers that the board can deliver to CPU. + +10.- [Multiprocessor] TODO 2.4.2.12 + [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2, + but not sure this is what is meant by "Determine the valid set of + P-states based on enabled P-states indicated + in MSRC001_00[68:64][PstateEn]" in 2.4.2.6-10 + +11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway) + +12.- generate ACPI for p-states. FIXME + Needs more assesment. There's some kind of fixed support that + does not seem to depend on CPU revision or actual MSRC001_00[68:64] + as BKDG apparently requires. + http://www.coreboot.org/ACPI#CPU_Power_Management + At least for Tilapia board: + src/mainboard///acpi_tables.c write_acpi_tables(...) calls + acpi_add_ssdt_pstates(...) + in /src/northbridge/amd/amdfam10/amdfam10_acpi.c + which apparently copies them from static info in + src/mainboard///acpi/cpstate.asl + +"must also be completed" + +a.- PllLockTime set in ruleset in defaults.h + BKDG says set it "If MSRC001_00[68:64][CpuFid] is different between + any two enabled P-states", but since it does not say "only if" + I guess it is safe to do it always. + +b.- prep_fid_change(...) + + */ #if CONFIG_SET_FIDVID + #include static inline void print_debug_fv(const char *str, u32 val) -- cgit v1.2.3