From becb3f62f724dee34e2f3aef6d781c701c0c551b Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Wed, 19 Jun 2013 01:23:50 -0700 Subject: exynos5420: Revamp the high speed I2C driver. The previous driver was a bit awkward and not entirely correct. This change primarily replaces the read/write functions with simpler and more robust (hopefully) version. Change-Id: I55f0ad8faec2de520e27577bd6dad9c0118d8171 Signed-off-by: Gabe Black Reviewed-on: http://review.coreboot.org/3684 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/cpu/samsung/exynos5420/i2c.c | 243 +++++++++++++++------------------------ 1 file changed, 91 insertions(+), 152 deletions(-) (limited to 'src/cpu/samsung') diff --git a/src/cpu/samsung/exynos5420/i2c.c b/src/cpu/samsung/exynos5420/i2c.c index 5ea1eef5de..cbe7a79c0a 100644 --- a/src/cpu/samsung/exynos5420/i2c.c +++ b/src/cpu/samsung/exynos5420/i2c.c @@ -46,6 +46,14 @@ #define HSI2C_TXCHON (1u << 7) /* Read/Receive */ #define HSI2C_SW_RST (1u << 31) +/* I2C_FIFO_STAT Register bits */ +#define HSI2C_TX_FIFO_LEVEL (0x7f << 0) +#define HSI2C_TX_FIFO_FULL (1u << 7) +#define HSI2C_TX_FIFO_EMPTY (1u << 8) +#define HSI2C_RX_FIFO_LEVEL (0x7f << 16) +#define HSI2C_RX_FIFO_FULL (1u << 23) +#define HSI2C_RX_FIFO_EMPTY (1u << 24) + /* I2C_FIFO_CTL Register bits */ #define HSI2C_RXFIFO_EN (1u << 0) #define HSI2C_TXFIFO_EN (1u << 1) @@ -77,11 +85,11 @@ /* I2C_TRANS_STATUS register bits */ #define HSI2C_MASTER_BUSY (1u << 17) #define HSI2C_SLAVE_BUSY (1u << 16) +#define HSI2C_TIMEOUT_AUTO (1u << 4) #define HSI2C_NO_DEV (1u << 3) #define HSI2C_NO_DEV_ACK (1u << 2) #define HSI2C_TRANS_ABORT (1u << 1) #define HSI2C_TRANS_DONE (1u << 0) -#define HSI2C_TIMEOUT_AUTO (0u << 0) #define HSI2C_SLV_ADDR_MAS(x) ((x & 0x3ff) << 10) @@ -205,48 +213,11 @@ static int WaitForXfer(struct s3c24x0_i2c *i2c) return I2C_NOK_TOUT; } -static int hsi2c_wait_for_irq(struct exynos5_hsi2c *i2c) -{ - struct mono_time current, end; - int ret = I2C_NOK_TOUT; - - timer_monotonic_get(¤t); - end = current; - mono_time_add_usecs(&end, HSI2C_TIMEOUT * 1000 * 10); - - while (mono_time_before(¤t, &end)) { - udelay(20); - if (read32(&i2c->usi_int_stat) & - (HSI2C_INT_I2C_EN | HSI2C_INT_TX_ALMOSTEMPTY_EN)) { - ret = I2C_OK; - break; - } - /* wait for a while and retry */ - timer_monotonic_get(¤t); - } - - if (ret == I2C_NOK_TOUT) - printk(BIOS_ERR, "%s timed out\n", __func__); - return ret; -} - -static int hsi2c_isack(struct exynos5_hsi2c *i2c) -{ - return read32(&i2c->usi_trans_status) & - (HSI2C_NO_DEV | HSI2C_NO_DEV_ACK); -} - static void ReadWriteByte(struct s3c24x0_i2c *i2c) { writel(read32(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon); } -static void hsi2c_clear_irqpd(struct exynos5_hsi2c *i2c) -{ - u32 stat = read32(&i2c->usi_int_stat); - write32(stat, &i2c->usi_int_stat); -} - static void i2c_ch_init(struct s3c24x0_i2c_bus *bus, int speed, int slaveadd) { unsigned long freq, pres = 16, div; @@ -346,6 +317,12 @@ static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus) write32(i2c_timing_s2, &hsregs->usi_timing_fs2); write32(i2c_timing_s3, &hsregs->usi_timing_fs3); write32(i2c_timing_sla, &hsregs->usi_timing_sla); + + /* Enable TXFIFO and RXFIFO */ + write32(HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN, &hsregs->usi_fifo_ctl); + + /* i2c_conf configure */ + write32(readl(&hsregs->usi_conf) | HSI2C_AUTO_MODE, &hsregs->usi_conf); } /* SW reset for the high speed bus */ @@ -386,34 +363,61 @@ void i2c_init(unsigned bus_num, int speed, int slaveadd) } /* - * Send a STOP event and wait for it to have completed - * - * @param mode If it is a master transmitter or receiver - * @return I2C_OK if the line became idle before timeout I2C_NOK_TOUT otherwise + * Check whether the transfer is complete. + */ +static int hsi2c_check_transfer(struct exynos5_hsi2c *i2c) +{ + uint32_t status = read32(&i2c->usi_trans_status); + if (status & HSI2C_TRANS_ABORT) + printk(BIOS_ERR, "%s: Transaction aborted.\n", __func__); + if (status & HSI2C_NO_DEV_ACK) + printk(BIOS_ERR, "%s: No ack from device.\n", __func__); + if (status & HSI2C_NO_DEV) + printk(BIOS_ERR, "%s: No response from device.\n", __func__); + if (status & HSI2C_TIMEOUT_AUTO) + printk(BIOS_ERR, "%s: Transaction time out.\n", __func__); + return !!(status & HSI2C_MASTER_BUSY); +} + +/* + * Wait for the transfer to finish. */ -static int hsi2c_send_stop(struct exynos5_hsi2c *i2c, int result) +static int hsi2c_wait_for_transfer(struct exynos5_hsi2c *i2c) { - int ret = I2C_NOK_TOUT; struct mono_time current, end; timer_monotonic_get(¤t); end = current; mono_time_add_usecs(&end, HSI2C_TIMEOUT * 1000); while (mono_time_before(¤t, &end)) { - if (!(read32(&i2c->usi_trans_status) & HSI2C_MASTER_BUSY)) { - ret = I2C_OK; - break; - } + if (!hsi2c_check_transfer(i2c)) + return 0; udelay(5); timer_monotonic_get(¤t); } - if (ret) - printk(BIOS_ERR, "%s timed out\n", __func__); - /* Setting the STOP event to fire */ - write32(HSI2C_FUNC_MODE_I2C, &i2c->usi_ctl); - write32(0x0, &i2c->usi_int_en); + return 1; +} + +static int hsi2c_senddata(struct exynos5_hsi2c *i2c, uint8_t *data, int len) +{ + while (hsi2c_check_transfer(i2c) && len) { + if (!(read32(&i2c->usi_fifo_stat) & HSI2C_TX_FIFO_FULL)) { + write32(*data++, &i2c->usi_txdata); + len--; + } + } + return len ? -1 : 0; +} - return (result == I2C_OK) ? ret : result; +static int hsi2c_recvdata(struct exynos5_hsi2c *i2c, uint8_t *data, int len) +{ + while (hsi2c_check_transfer(i2c) && len) { + if (!(read32(&i2c->usi_fifo_stat) & HSI2C_RX_FIFO_EMPTY)) { + *data++ = read32(&i2c->usi_rxdata); + len--; + } + } + return len ? -1 : 0; } static int hsi2c_write(struct exynos5_hsi2c *i2c, @@ -423,83 +427,33 @@ static int hsi2c_write(struct exynos5_hsi2c *i2c, unsigned char data[], unsigned short len) { - int i = 0, result = I2C_OK; - u32 i2c_auto_conf; - u32 stat; - struct mono_time current, end; - - /* Check I2C bus idle */ - i = HSI2C_TIMEOUT * 20; - timer_monotonic_get(¤t); - end = current; - mono_time_add_usecs(&end, HSI2C_TIMEOUT * 1000 * 20); - while (mono_time_before(¤t, &end)) { - if (!(read32(&i2c->usi_trans_status) & HSI2C_MASTER_BUSY)) - break; - udelay(50); - timer_monotonic_get(¤t); - } + uint32_t i2c_auto_conf; - stat = read32(&i2c->usi_trans_status); - - if (stat & HSI2C_MASTER_BUSY) { - printk(BIOS_ERR, "%s: bus busy, timing out\n", __func__); - return I2C_NOK_TOUT; - } - /* Disable TXFIFO and RXFIFO */ - write32(0, &i2c->usi_fifo_ctl); + if (hsi2c_wait_for_transfer(i2c)) + return -1; /* chip address */ write32(HSI2C_SLV_ADDR_MAS(chip), &i2c->i2c_addr); - /* Enable interrupts */ - write32((HSI2C_INT_I2C_EN | HSI2C_INT_TX_ALMOSTEMPTY_EN), - &i2c->usi_int_en); - /* usi_ctl enable i2c func, master write configure */ write32((HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER), &i2c->usi_ctl); - /* i2c_conf configure */ - write32(readl(&i2c->usi_conf) | HSI2C_AUTO_MODE, &i2c->usi_conf); - /* auto_conf for write length and stop configure */ i2c_auto_conf = ((len + alen) | HSI2C_STOP_AFTER_TRANS); i2c_auto_conf &= ~HSI2C_READ_WRITE; - write32(i2c_auto_conf, &i2c->usi_auto_conf); - /* Master run, start xfer */ - write32(read32(&i2c->usi_auto_conf) | HSI2C_MASTER_RUN, - &i2c->usi_auto_conf); - - result = hsi2c_wait_for_irq(i2c); - if ((result == I2C_OK) && hsi2c_isack(i2c)) { - printk(BIOS_ERR, "%s: NAK from device %04x\n", __func__, - HSI2C_SLV_ADDR_MAS(chip)); - result = I2C_NACK; - goto out; - } + i2c_auto_conf |= HSI2C_MASTER_RUN; + write32(i2c_auto_conf, &i2c->usi_auto_conf); - for (i = 0; i < alen && (result == I2C_OK); i++) { - write32(addr[i], &i2c->usi_txdata); - result = hsi2c_wait_for_irq(i2c); - hsi2c_clear_irqpd(i2c); - if (result) - printk(BIOS_ERR, "%s: timeout on sending address\n", - __func__); + if (hsi2c_senddata(i2c, addr, alen) || + hsi2c_senddata(i2c, data, len) || + hsi2c_wait_for_transfer(i2c)) { + return -1; } - for (i = 0; i < len && (result == I2C_OK); i++) { - write32(data[i], &i2c->usi_txdata); - result = hsi2c_wait_for_irq(i2c); - hsi2c_clear_irqpd(i2c); - if (result) - printk(BIOS_ERR, "%s: timeout on sending data\n", - __func__); - } -out: - hsi2c_clear_irqpd(i2c); - return hsi2c_send_stop(i2c, result); + write32(HSI2C_FUNC_MODE_I2C, &i2c->usi_ctl); + return 0; } static int hsi2c_read(struct exynos5_hsi2c *i2c, @@ -510,60 +464,45 @@ static int hsi2c_read(struct exynos5_hsi2c *i2c, unsigned short len, int check) { - int i, result; - u32 i2c_auto_conf; - - if (!check) { - result = hsi2c_write(i2c, chip, addr, alen, data, 0); - if (result != I2C_OK) { - printk(BIOS_ERR, "write failed Result: %d\n", result); - return result; - } - } + uint32_t i2c_auto_conf; /* start read */ - /* Disable TXFIFO and RXFIFO */ - write32(0, &i2c->usi_fifo_ctl); + if (hsi2c_wait_for_transfer(i2c)) + return -1; /* chip address */ write32(HSI2C_SLV_ADDR_MAS(chip), &i2c->i2c_addr); - /* Enable interrupts */ - write32(HSI2C_INT_I2C_EN, &i2c->usi_int_en); + /* usi_ctl enable i2c func, master write configure */ + write32((HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER), + &i2c->usi_ctl); - /* i2c_conf configure */ - write32(read32(&i2c->usi_conf) | HSI2C_AUTO_MODE, &i2c->usi_conf); + /* auto_conf */ + write32(alen | HSI2C_MASTER_RUN | HSI2C_STOP_AFTER_TRANS, + &i2c->usi_auto_conf); - /* auto_conf, length and stop configure */ - i2c_auto_conf = (len | HSI2C_STOP_AFTER_TRANS | HSI2C_READ_WRITE); - write32(i2c_auto_conf, &i2c->usi_auto_conf); + if (hsi2c_senddata(i2c, addr, alen) || + hsi2c_wait_for_transfer(i2c)) { + return -1; + } /* usi_ctl enable i2c func, master WRITE configure */ write32((HSI2C_RXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER), &i2c->usi_ctl); + /* auto_conf, length and stop configure */ + i2c_auto_conf = (len | HSI2C_STOP_AFTER_TRANS | HSI2C_READ_WRITE); + i2c_auto_conf |= HSI2C_MASTER_RUN; /* Master run, start xfer */ - write32(readl(&i2c->usi_auto_conf) | HSI2C_MASTER_RUN, - &i2c->usi_auto_conf); + write32(i2c_auto_conf, &i2c->usi_auto_conf); - result = hsi2c_wait_for_irq(i2c); - if ((result == I2C_OK) && hsi2c_isack(i2c)) { - result = I2C_NACK; - goto out; + if (hsi2c_recvdata(i2c, data, len) || + hsi2c_wait_for_transfer(i2c)) { + return -1; } - for (i = 0; i < len && (result == I2C_OK); i++) { - result = hsi2c_wait_for_irq(i2c); - data[i] = read32(&i2c->usi_rxdata); - udelay(100); - } - /*for(i = 0; i < len; i++) - printk(BIOS_SPEW, " %02x", data[i]); - printk(BIOS_SPEW, "\n");*/ -out: - /* Stop and quit */ - hsi2c_clear_irqpd(i2c); - return hsi2c_send_stop(i2c, result); + write32(HSI2C_FUNC_MODE_I2C, &i2c->usi_ctl); + return 0; } /* -- cgit v1.2.3