From cdc50480c414df3b5f438f7f26a73df597e544ae Mon Sep 17 00:00:00 2001 From: Lee Leahy Date: Wed, 15 Mar 2017 18:26:18 -0700 Subject: cpu/intel: Wrap lines at 80 columns Fix the following warning detected by checkpatch.pl: WARNING: line over 80 characters TEST=Build and run on Galileo Gen2 Change-Id: I74f25da5c53bd518189ce86817d6e3385b29c3b4 Signed-off-by: Lee Leahy Reviewed-on: https://review.coreboot.org/18850 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/cpu/intel/common/common_init.c | 6 ++-- src/cpu/intel/fsp_model_406dx/bootblock.c | 8 +++-- src/cpu/intel/haswell/haswell_init.c | 3 +- src/cpu/intel/haswell/smmrelocate.c | 6 ++-- src/cpu/intel/microcode/microcode.c | 3 +- src/cpu/intel/model_1067x/model_1067x_init.c | 3 +- src/cpu/intel/model_106cx/model_106cx_init.c | 9 +++-- src/cpu/intel/model_6dx/model_6dx_init.c | 5 +-- src/cpu/intel/model_6ex/model_6ex_init.c | 6 ++-- src/cpu/intel/model_6fx/model_6fx_init.c | 6 ++-- src/cpu/intel/slot_1/l2_cache.c | 53 ++++++++++++++++++---------- src/cpu/intel/smm/gen1/smmrelocate.c | 9 +++-- 12 files changed, 76 insertions(+), 41 deletions(-) (limited to 'src/cpu') diff --git a/src/cpu/intel/common/common_init.c b/src/cpu/intel/common/common_init.c index da7b82651f..44a316b641 100644 --- a/src/cpu/intel/common/common_init.c +++ b/src/cpu/intel/common/common_init.c @@ -40,7 +40,8 @@ void set_vmx(void) msr = rdmsr(IA32_FEATURE_CONTROL); if (msr.lo & (1 << 0)) { - printk(BIOS_ERR, "VMX is locked, so %s will do nothing\n", __func__); + printk(BIOS_ERR, "VMX is locked, so %s will do nothing\n", + __func__); /* VMX locked. If we set it again we get an illegal * instruction */ @@ -66,6 +67,7 @@ void set_vmx(void) wrmsr(IA32_FEATURE_CONTROL, msr); } - printk(BIOS_DEBUG, "VMX status: %s, %s\n", enable ? "enabled" : "disabled", + printk(BIOS_DEBUG, "VMX status: %s, %s\n", + enable ? "enabled" : "disabled", lock ? "locked" : "unlocked"); } diff --git a/src/cpu/intel/fsp_model_406dx/bootblock.c b/src/cpu/intel/fsp_model_406dx/bootblock.c index ee4cfac2de..a208ec9fbe 100644 --- a/src/cpu/intel/fsp_model_406dx/bootblock.c +++ b/src/cpu/intel/fsp_model_406dx/bootblock.c @@ -33,11 +33,13 @@ static void check_for_warm_reset(void) { /* - * Check if INIT# is asserted by port 0xCF9 and whether RCBA has been set. - * If either is true, then this is a warm reset so execute a Hard Reset + * Check if INIT# is asserted by port 0xCF9 and whether RCBA has been + * set. If either is true, then this is a warm reset so execute a + * Hard Reset */ if ((inb(0xcf9) == 0x04) || - (pci_io_read_config32(SOC_LPC_DEV, RCBA) & RCBA_ENABLE)) { + (pci_io_read_config32(SOC_LPC_DEV, RCBA) + & RCBA_ENABLE)) { outb(0x00, 0xcf9); outb(0x06, 0xcf9); } diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c index 0f6be3988f..e850fd1ae6 100644 --- a/src/cpu/intel/haswell/haswell_init.c +++ b/src/cpu/intel/haswell/haswell_init.c @@ -419,7 +419,8 @@ void set_power_limits(u8 power_limit_1_time) u8 power_limit_1_val; if (power_limit_1_time >= ARRAY_SIZE(power_limit_time_sec_to_msr)) - power_limit_1_time = ARRAY_SIZE(power_limit_time_sec_to_msr) - 1; + power_limit_1_time = ARRAY_SIZE(power_limit_time_sec_to_msr) + - 1; if (!(msr.lo & PLATFORM_INFO_SET_TDP)) return; diff --git a/src/cpu/intel/haswell/smmrelocate.c b/src/cpu/intel/haswell/smmrelocate.c index e7a9ee1620..5c88dfa109 100644 --- a/src/cpu/intel/haswell/smmrelocate.c +++ b/src/cpu/intel/haswell/smmrelocate.c @@ -255,7 +255,8 @@ static void fill_in_relocation_params(struct device *dev, /* SMRR has 32-bits of valid address aligned to 4KiB. */ params->smrr_base.lo = (params->smram_base & rmask) | MTRR_TYPE_WRBACK; params->smrr_base.hi = 0; - params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID; + params->smrr_mask.lo = (~(tseg_size - 1) & rmask) + | MTRR_PHYS_MASK_VALID; params->smrr_mask.hi = 0; /* The EMRR and UNCORE_EMRR are at IEDBASE + 2MiB */ @@ -266,7 +267,8 @@ static void fill_in_relocation_params(struct device *dev, * on the number of physical address bits supported. */ params->emrr_base.lo = emrr_base | MTRR_TYPE_WRBACK; params->emrr_base.hi = 0; - params->emrr_mask.lo = (~(emrr_size - 1) & rmask) | MTRR_PHYS_MASK_VALID; + params->emrr_mask.lo = (~(emrr_size - 1) & rmask) + | MTRR_PHYS_MASK_VALID; params->emrr_mask.hi = (1 << (phys_bits - 32)) - 1; /* UNCORE_EMRR has 39 bits of valid address aligned to 4KiB. */ diff --git a/src/cpu/intel/microcode/microcode.c b/src/cpu/intel/microcode/microcode.c index 1ab3027244..59c3b8ab2f 100644 --- a/src/cpu/intel/microcode/microcode.c +++ b/src/cpu/intel/microcode/microcode.c @@ -209,7 +209,8 @@ void intel_update_microcode_from_cbfs(void) } #if ENV_RAMSTAGE -__attribute__((weak)) int soc_skip_ucode_update(u32 currrent_patch_id, u32 new_patch_id) +__attribute__((weak)) int soc_skip_ucode_update(u32 currrent_patch_id, + u32 new_patch_id) { return 0; } diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c index 9b7536de57..01cb45d28c 100644 --- a/src/cpu/intel/model_1067x/model_1067x_init.c +++ b/src/cpu/intel/model_1067x/model_1067x_init.c @@ -83,7 +83,8 @@ static void configure_c_states(const int quad) /* Set Processor MWAIT IO BASE */ msr.hi = 0; - msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) << 16); + msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) + << 16); wrmsr(MSR_PMG_IO_BASE_ADDR, msr); /* Set IO Capture Address */ diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c index d9ce736787..b07fd0b79b 100644 --- a/src/cpu/intel/model_106cx/model_106cx_init.c +++ b/src/cpu/intel/model_106cx/model_106cx_init.c @@ -34,7 +34,8 @@ static void configure_c_states(void) msr = rdmsr(MSR_PMG_CST_CONFIG_CONTROL); msr.lo |= (1 << 15); // Lock configuration - msr.lo |= (1 << 10); // redirect IO-based CState transition requests to MWAIT + msr.lo |= (1 << 10); // redirect IO-based CState transition requests to + // MWAIT msr.lo &= ~(1 << 9); // Issue a single stop grant cycle upon stpclk msr.lo &= ~7; msr.lo |= HIGHEST_CLEVEL; // support at most C3 // TODO Do we want Deep C4 and Dynamic L2 shrinking? @@ -43,13 +44,15 @@ static void configure_c_states(void) /* Set Processor MWAIT IO BASE (P_BLK) */ msr.hi = 0; // TODO Do we want PM1_BASE? Needs SMM? - //msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) << 16); + //msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) + // << 16); msr.lo = ((PMB0_BASE + 4) & 0xffff); wrmsr(MSR_PMG_IO_BASE_ADDR, msr); /* set C_LVL controls */ msr.hi = 0; - msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); // -2 because LVL0+1 aren't counted + // -2 because LVL0+1 aren't counted + msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); wrmsr(MSR_PMG_IO_CAPTURE_ADDR, msr); } diff --git a/src/cpu/intel/model_6dx/model_6dx_init.c b/src/cpu/intel/model_6dx/model_6dx_init.c index a18b00c90b..0a5191410a 100644 --- a/src/cpu/intel/model_6dx/model_6dx_init.c +++ b/src/cpu/intel/model_6dx/model_6dx_init.c @@ -40,8 +40,9 @@ static struct device_operations cpu_dev_ops = { }; static struct cpu_device_id cpu_table[] = { - { X86_VENDOR_INTEL, 0x06D0 }, /* Pentium M on 90nm with 2MiB of L2 cache */ - { X86_VENDOR_INTEL, 0x06D6 }, /* Pentium M on 90nm with 2MiB of L2 cache */ + /* Pentium M on 90nm with 2MiB of L2 cache */ + { X86_VENDOR_INTEL, 0x06D0 }, + { X86_VENDOR_INTEL, 0x06D6 }, { 0, 0 }, }; diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c index 8381c70108..ff9284fc5f 100644 --- a/src/cpu/intel/model_6ex/model_6ex_init.c +++ b/src/cpu/intel/model_6ex/model_6ex_init.c @@ -47,12 +47,14 @@ static void configure_c_states(void) /* Set Processor MWAIT IO BASE (P_BLK) */ msr.hi = 0; - msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) << 16); + msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) + << 16); wrmsr(MSR_PMG_IO_BASE_ADDR, msr); /* Set C_LVL controls and IO Capture Address */ msr.hi = 0; - msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); // -2 because LVL0+1 aren't counted + // -2 because LVL0+1 aren't counted + msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); wrmsr(MSR_PMG_IO_CAPTURE_ADDR, msr); } diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c index 4c13f12cb1..2a04a4e122 100644 --- a/src/cpu/intel/model_6fx/model_6fx_init.c +++ b/src/cpu/intel/model_6fx/model_6fx_init.c @@ -48,12 +48,14 @@ static void configure_c_states(void) /* Set Processor MWAIT IO BASE (P_BLK) */ msr.hi = 0; - msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) << 16); + msr.lo = ((PMB0_BASE + 4) & 0xffff) | (((PMB1_BASE + 9) & 0xffff) + << 16); wrmsr(MSR_PMG_IO_BASE_ADDR, msr); /* Set C_LVL controls and IO Capture Address */ msr.hi = 0; - msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); // -2 because LVL0+1 aren't counted + // -2 because LVL0+1 aren't counted + msr.lo = (PMB0_BASE + 4) | ((HIGHEST_CLEVEL - 2) << 16); wrmsr(MSR_PMG_IO_CAPTURE_ADDR, msr); } diff --git a/src/cpu/intel/slot_1/l2_cache.c b/src/cpu/intel/slot_1/l2_cache.c index b7b9719747..05eaeb300b 100644 --- a/src/cpu/intel/slot_1/l2_cache.c +++ b/src/cpu/intel/slot_1/l2_cache.c @@ -169,7 +169,8 @@ int calculate_l2_latency(void) msr = rdmsr(EBL_CR_POWERON); /* Get clock multiplier and FSB frequency. * Multiplier is in [25:22]. - * FSB is in [19:18] in Katmai, [19] in Deschutes ([18] is zero for them). + * FSB is in [19:18] in Katmai, [19] in Deschutes ([18] is zero + * for them). */ eax = msr.lo >> 18; if (signature == 0x650) { @@ -185,7 +186,9 @@ int calculate_l2_latency(void) for (le = latency_table; le->key != eax; le++) { /* Fail if we get to the end of the table */ if (le->key == 0xff) { - printk(BIOS_DEBUG, "Could not find key %02x in latency table\n", eax); + printk(BIOS_DEBUG, + "Could not find key %02x in latency table\n", + eax); return -1; } } @@ -281,7 +284,8 @@ int write_l2(u32 address, u32 data) } else v2 &= 0x7; - /* This write has to be replicated to a number of places. Not sure what. */ + /* This write has to be replicated to a number of places. Not sure what. + */ for (i = 0; i < v2; i++) { @@ -339,7 +343,8 @@ int test_l2_address_alias(u32 address1, u32 address2, /* Calculates the L2 cache size. * * Reference: Intel(R) 64 and IA-32 Architectures Software Developer's Manual - * Volume 3B: System Programming Guide, Part 2, Intel pub. 253669, pg. B-172. + * Volume 3B: System Programming Guide, Part 2, Intel pub. 253669, + * pg. B-172. * */ int calculate_l2_cache_size(void) @@ -357,8 +362,9 @@ int calculate_l2_cache_size(void) bblcr3 = msr.lo & ~BBLCR3_L2_SIZE; /* * Successively write in all the possible cache size per bank - * into BBL_CR_CTL3[17:13], starting from 256KB (00001) to 4MB (10000), - * and read the last value written and accepted by the cache. + * into BBL_CR_CTL3[17:13], starting from 256KB (00001) to 4MB + * (10000), and read the last value written and accepted by the + * cache. * * No idea why these bits are writable at all. */ @@ -386,8 +392,9 @@ int calculate_l2_cache_size(void) printk(BIOS_DEBUG, "Maximum cache mask is %x\n", cache_setting); - /* For now, BBL_CR_CTL3 has the highest cache "size" that register - * will accept. Now we'll ping the cache and see where it wraps. + /* For now, BBL_CR_CTL3 has the highest cache "size" that + * register will accept. Now we'll ping the cache and see where + * it wraps. */ /* Write aaaaaaaa:aaaaaaaa to address 0 in the l2 cache. @@ -493,7 +500,8 @@ int calculate_l2_cache_size(void) return 0; } -// L2 physical address range can be found from L2 control register 3, bits [2:0]. +// L2 physical address range can be found from L2 control register 3, +// bits [2:0]. int calculate_l2_physical_address_range(void) { int r0, r3; @@ -512,7 +520,8 @@ int calculate_l2_physical_address_range(void) else r3 &= 0x7; - printk(BIOS_DEBUG, "L2 Physical Address Range is %dM\n", (1 << r3) * 512); + printk(BIOS_DEBUG, "L2 Physical Address Range is %dM\n", + (1 << r3) * 512); /* Shift into [22:20] to be saved into BBL_CR_CTL3. */ r3 = r3 << 20; @@ -659,8 +668,9 @@ int p6_configure_l2_cache(void) bblctl3.lo = eax; wrmsr(BBL_CR_CTL3, bblctl3); - /* Write BBL_CR_CTL3[27:26] (reserved??) to bits [1:0] of L2 register 4. - * Apparently all other bits must be preserved, hence these code. + /* Write BBL_CR_CTL3[27:26] (reserved??) to bits [1:0] of L2 + * register 4. Apparently all other bits must be preserved, + * hence these code. */ v = (calc_eax >> 26) & 0x3; @@ -685,7 +695,8 @@ int p6_configure_l2_cache(void) /* Read L2 register 0 */ v = read_l2(0); - /* If L2(0)[5] set (and can be read properly), enable CRTN and address parity + /* If L2(0)[5] set (and can be read properly), enable CRTN and address + * parity */ if (v >= 0 && (v & 0x20)) { bblctl3 = rdmsr(BBL_CR_CTL3); @@ -700,7 +711,8 @@ int p6_configure_l2_cache(void) set_l2_ecc(); if (calculate_l2_physical_address_range() != 0) { - printk(BIOS_ERR, "Failed to calculate L2 physical address range"); + printk(BIOS_ERR, + "Failed to calculate L2 physical address range"); goto bad; } @@ -738,9 +750,10 @@ int p6_configure_l2_cache(void) /* Update each way */ - /* We're supposed to get L2 associativity from BBL_CR_CTL3[10:9]. - * But this code only applies to certain members of the P6 processor family - * and since all P6 processors have 4-way L2 cache, we can safely assume + /* We're supposed to get L2 associativity from + * BBL_CR_CTL3[10:9]. But this code only applies to certain + * members of the P6 processor family and since all P6 + * processors have 4-way L2 cache, we can safely assume * 4 way for all cache operations. */ @@ -748,8 +761,10 @@ int p6_configure_l2_cache(void) /* Send Tag Write w/Data Write (TWW) to L2 controller * MESI = Invalid */ - if (signal_l2(cache_size, 0, 0, v, L2CMD_TWW | L2CMD_MESI_I) != 0) { - printk(BIOS_ERR, "Failed on signal_l2(%x, %x)\n", + if (signal_l2(cache_size, 0, 0, v, L2CMD_TWW + | L2CMD_MESI_I) != 0) { + printk(BIOS_ERR, + "Failed on signal_l2(%x, %x)\n", cache_size, v); goto bad; } diff --git a/src/cpu/intel/smm/gen1/smmrelocate.c b/src/cpu/intel/smm/gen1/smmrelocate.c index c3596d29a7..1da7a4ba5d 100644 --- a/src/cpu/intel/smm/gen1/smmrelocate.c +++ b/src/cpu/intel/smm/gen1/smmrelocate.c @@ -133,7 +133,8 @@ static void fill_in_relocation_params(struct smm_relocation_params *params) /* SMRR has 32-bits of valid address aligned to 4KiB. */ params->smrr_base.lo = (params->smram_base & rmask) | MTRR_TYPE_WRBACK; params->smrr_base.hi = 0; - params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID; + params->smrr_mask.lo = (~(tseg_size - 1) & rmask) + | MTRR_PHYS_MASK_VALID; params->smrr_mask.hi = 0; } @@ -226,12 +227,14 @@ static int cpu_smm_setup(void) num_cpus, CONFIG_MAX_CPUS); } - if (install_relocation_handler(apic_id_map, num_cpus, &smm_reloc_params)) { + if (install_relocation_handler(apic_id_map, num_cpus, + &smm_reloc_params)) { printk(BIOS_CRIT, "SMM Relocation handler install failed.\n"); return -1; } - if (install_permanent_handler(apic_id_map, num_cpus, &smm_reloc_params)) { + if (install_permanent_handler(apic_id_map, num_cpus, + &smm_reloc_params)) { printk(BIOS_CRIT, "SMM Permanent handler install failed.\n"); return -1; } -- cgit v1.2.3