From fdbc1af5e2c43ef223cc11ff98ee970423ae7797 Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Wed, 26 Aug 2015 10:11:02 -0400 Subject: Kconfig: Remove EXPERT mode After much consideration, and many years of an EXPERT mode sitting almost completely unused, we've seen that it doesn't work for us. There is no standard on what constitutes EXPERT, and most of coreboot's options Kconfig are expert-level. We even joked that not selecting "EXPERT" should prevent coreboot from compiling: @echo $(shell whoami) is not permitted to compile coreboot Change-Id: Ic22dd54a48190b81d711625efb6b9f3078f41778 Signed-off-by: Alexandru Gagniuc Reviewed-on: http://review.coreboot.org/11365 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens --- src/device/Kconfig | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'src/device') diff --git a/src/device/Kconfig b/src/device/Kconfig index 39e612d047..613461b346 100644 --- a/src/device/Kconfig +++ b/src/device/Kconfig @@ -51,7 +51,7 @@ config VGA_ROM_RUN bool "Run VGA Option ROMs" default n if PAYLOAD_SEABIOS default y if !PAYLOAD_SEABIOS - depends on PCI && !MAINBOARD_DO_NATIVE_VGA_INIT && EXPERT + depends on PCI && !MAINBOARD_DO_NATIVE_VGA_INIT help Execute VGA Option ROMs in coreboot if found. This is required to enable PCI/AGP/PCI-E video cards when not using a SeaBIOS @@ -92,7 +92,7 @@ config ON_DEVICE_ROM_RUN bool "Run Option ROMs on PCI devices" default n if PAYLOAD_SEABIOS default y if !PAYLOAD_SEABIOS - depends on PCI && EXPERT + depends on PCI help Execute Option ROMs stored on PCI/PCIe/AGP devices in coreboot. @@ -165,17 +165,12 @@ config YABEL_PCI_FAKE_WRITING_OTHER_DEVICES_CONFIG config YABEL_VIRTMEM_LOCATION prompt "Location of YABEL's virtual memory" hex - depends on PCI_OPTION_ROM_RUN_YABEL && EXPERT + depends on PCI_OPTION_ROM_RUN_YABEL default 0x1000000 help YABEL requires 1MB memory for its CPU emulation. This memory is normally located at 16MB. -config YABEL_VIRTMEM_LOCATION - hex - depends on PCI_OPTION_ROM_RUN_YABEL && !EXPERT - default 0x1000000 - config YABEL_DIRECTHW prompt "Direct hardware access" bool -- cgit v1.2.3