From 48f708d199769d03ef1c31184955703d9d73ad80 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Mon, 3 Oct 2016 12:43:14 -0700 Subject: drivers/i2c/tpm/cr50: Initialize IRQ status handler before probe Move the setup of the IRQ status handler so it will be set up properly before the early probe happens. BUG=chrome-os-partner:53336 Change-Id: I4380af1233d2a252899459635a3cb69ca196088d Signed-off-by: Duncan Laurie Reviewed-on: https://review.coreboot.org/16861 Reviewed-by: Aaron Durbin Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Vadim Bendebury --- src/drivers/i2c/tpm/cr50.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'src/drivers/i2c') diff --git a/src/drivers/i2c/tpm/cr50.c b/src/drivers/i2c/tpm/cr50.c index af7f2aef44..f7e667b1d9 100644 --- a/src/drivers/i2c/tpm/cr50.c +++ b/src/drivers/i2c/tpm/cr50.c @@ -416,6 +416,19 @@ static void cr50_vendor_init(struct tpm_chip *chip) chip->vendor.send = &cr50_i2c_tis_send; chip->vendor.cancel = &cr50_i2c_tis_ready; chip->vendor.irq = CONFIG_DRIVER_TPM_I2C_IRQ; + + /* + * Interrupts are not supported this early in firmware, + * use use an arch-specific method to query for interrupt status. + */ + if (chip->vendor.irq > 0) { +#if IS_ENABLED(CONFIG_ARCH_X86) + /* Query GPE status for interrupt */ + chip->vendor.irq_status = &acpi_get_gpe; +#else + chip->vendor.irq = -1; +#endif + } } int tpm_vendor_probe(unsigned bus, uint32_t addr) @@ -470,19 +483,6 @@ int tpm_vendor_init(struct tpm_chip *chip, unsigned bus, uint32_t dev_addr) cr50_vendor_init(chip); - /* - * Interrupts are not supported this early in firmware, - * use use an arch-specific method to query for interrupt status. - */ - if (chip->vendor.irq > 0) { -#if IS_ENABLED(CONFIG_ARCH_X86) - /* Query GPE status for interrupt */ - chip->vendor.irq_status = &acpi_get_gpe; -#else - chip->vendor.irq = -1; -#endif - } - if (request_locality(chip, 0) != 0) return -1; -- cgit v1.2.3