From 42f795904c550215fc53706155ceb82f1f720117 Mon Sep 17 00:00:00 2001 From: Yidi Lin Date: Mon, 21 Sep 2020 18:04:10 +0800 Subject: ec/google/chromeec: Update ec_commands.h This change copies ec_commands.h from Chromium OS EC repo at 7b6cb69db. The change also drops unneeded empty lines and coverts license header to SPDX style. BUG=b:147789962 BRANCH=none TEST=emerge-asurada coreboot Change-Id: I9816dab5edb418e76896355a0802c59307c664c4 Signed-off-by: Yidi Lin Reviewed-on: https://review.coreboot.org/c/coreboot/+/46403 Tested-by: build bot (Jenkins) Reviewed-by: Hung-Te Lin Reviewed-by: Yu-Ping Wu --- src/ec/google/chromeec/ec_commands.h | 228 ++++++++++++++++++++++++++++++++++- 1 file changed, 226 insertions(+), 2 deletions(-) (limited to 'src/ec/google/chromeec') diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h index 4c3d0bb838..4e40c6dee5 100644 --- a/src/ec/google/chromeec/ec_commands.h +++ b/src/ec/google/chromeec/ec_commands.h @@ -2520,6 +2520,12 @@ enum motionsense_command { */ MOTIONSENSE_CMD_ONLINE_CALIB_READ = 19, + /* + * Activity management + * Retrieve current status of given activity. + */ + MOTIONSENSE_CMD_GET_ACTIVITY = 20, + /* Number of motionsense sub-commands. */ MOTIONSENSE_NUM_CMDS }; @@ -2572,6 +2578,8 @@ enum motionsensor_chip { MOTIONSENSE_CHIP_LIS2DW12 = 21, MOTIONSENSE_CHIP_LIS2DWL = 22, MOTIONSENSE_CHIP_LIS2DS = 23, + MOTIONSENSE_CHIP_BMI260 = 24, + MOTIONSENSE_CHIP_ICM426XX = 25, MOTIONSENSE_CHIP_MAX, }; @@ -2592,6 +2600,8 @@ struct ec_response_motion_sensor_data { /* Each sensor is up to 3-axis. */ union { int16_t data[3]; + /* for sensors using unsigned data */ + uint16_t udata[3]; struct __ec_todo_packed { uint16_t reserved; uint32_t timestamp; @@ -2637,6 +2647,7 @@ enum motionsensor_activity { MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, MOTIONSENSE_ACTIVITY_ORIENTATION = 3, + MOTIONSENSE_ACTIVITY_BODY_DETECTION = 4, }; struct ec_motion_sense_activity { @@ -2820,6 +2831,7 @@ struct ec_params_motion_sense { uint32_t max_data_vector; } fifo_read; + /* Used for MOTIONSENSE_CMD_SET_ACTIVITY */ struct ec_motion_sense_activity set_activity; /* Used for MOTIONSENSE_CMD_LID_ANGLE */ @@ -2874,6 +2886,13 @@ struct ec_params_motion_sense { uint8_t sensor_num; } online_calib_read; + /* + * Used for MOTIONSENSE_CMD_GET_ACTIVITY. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + uint8_t activity; /* enum motionsensor_activity */ + } get_activity; }; } __ec_todo_packed; @@ -3025,6 +3044,10 @@ struct ec_response_motion_sense { uint16_t hys_degree; } tablet_mode_threshold; + /* USED for MOTIONSENSE_CMD_GET_ACTIVITY. */ + struct __ec_todo_unpacked { + uint8_t state; + } get_activity; }; } __ec_todo_packed; @@ -4429,6 +4452,7 @@ struct ec_params_charge_state { uint32_t value; /* value to set */ } set_param; }; + uint8_t chgnum; /* Version 1 supports chgnum */ } __ec_todo_packed; struct ec_response_charge_state { @@ -4982,6 +5006,7 @@ enum ec_codec_i2s_rx_subcmd { EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2, EC_CODEC_I2S_RX_SET_DAIFMT = 0x3, EC_CODEC_I2S_RX_SET_BCLK = 0x4, + EC_CODEC_I2S_RX_RESET = 0x5, EC_CODEC_I2S_RX_SUBCMD_COUNT, }; @@ -5094,6 +5119,33 @@ struct __ec_align4 ec_response_ec_codec_wov_read_audio_shm { uint32_t len; }; +/*****************************************************************************/ +/* Commands for PoE PSE controller */ + +#define EC_CMD_PSE 0x00C0 + +enum ec_pse_subcmd { + EC_PSE_STATUS = 0x0, + EC_PSE_ENABLE = 0x1, + EC_PSE_DISABLE = 0x2, + EC_PSE_SUBCMD_COUNT, +}; + +struct __ec_align1 ec_params_pse { + uint8_t cmd; /* enum ec_pse_subcmd */ + uint8_t port; /* PSE port */ +}; + +enum ec_pse_status { + EC_PSE_STATUS_DISABLED = 0x0, + EC_PSE_STATUS_ENABLED = 0x1, + EC_PSE_STATUS_POWERED = 0x2, +}; + +struct __ec_align1 ec_response_pse_status { + uint8_t status; /* enum ec_pse_status */ +}; + /*****************************************************************************/ /* System commands */ @@ -5112,7 +5164,7 @@ enum ec_reboot_cmd { EC_REBOOT_COLD = 4, /* Cold-reboot */ EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ EC_REBOOT_HIBERNATE = 6, /* Hibernate EC */ - EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */ + EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_IDLE flag */ }; /* Flags for ec_params_reboot_ec.reboot_flags */ @@ -5330,7 +5382,8 @@ struct ec_response_usb_pd_control_v2 { uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ uint8_t reserved; /* Reserved for future use */ uint8_t control_flags; /* USB_PD_CTRL_*flags */ - uint8_t cable_speed; /* TBT_SS_* cable speed */ + /* TODO: b:158234949 Add definitions for cable speed */ + uint8_t cable_speed; /* USB_R30_SS/TBT_SS_* cable speed */ uint8_t cable_gen; /* TBT_GEN3_* cable rounded support */ } __ec_align1; @@ -5386,6 +5439,7 @@ struct ec_response_usb_pd_power_info { uint32_t max_power; } __ec_align4; + /* * This command will return the number of USB PD charge port + the number * of dedicated port present. @@ -5587,6 +5641,7 @@ struct ec_params_pd_write_log_entry { uint8_t port; /* port#, or 0 for events unrelated to a given port */ } __ec_align1; + /* Control USB-PD chip */ #define EC_CMD_PD_CONTROL 0x0119 @@ -5711,6 +5766,8 @@ enum cbi_data_tag { CBI_TAG_MODEL_ID = 5, /* uint32_t or smaller */ CBI_TAG_FW_CONFIG = 6, /* uint32_t bit field */ CBI_TAG_PCB_SUPPLIER = 7, /* uint32_t or smaller */ + /* Second Source Factory Cache */ + CBI_TAG_SSFC = 8, /* uint32_t bit field */ CBI_TAG_COUNT, }; @@ -5775,6 +5832,9 @@ struct ec_params_set_cbi { #define EC_RESET_FLAG_STAY_IN_RO BIT(19) /* Do not select RW in EFS. This * enables PD in RO for Chromebox. */ +#define EC_RESET_FLAG_EFS BIT(20) /* Jumped to this image by EFS */ +#define EC_RESET_FLAG_AP_IDLE BIT(21) /* Leave alone AP */ +#define EC_RESET_FLAG_INITIAL_PWR BIT(22) /* EC had power, then was reset */ struct ec_response_uptime_info { /* @@ -5870,6 +5930,7 @@ struct ec_response_rollback_info { int32_t rw_rollback_version; } __ec_align4; + /* Issue AP reset */ #define EC_CMD_AP_RESET 0x0125 @@ -5911,6 +5972,7 @@ struct ec_params_locate_chip { }; } __ec_align2; + struct ec_response_locate_chip { uint8_t bus_type; /* enum ec_bus_type */ uint8_t reserved; /* Aligning the following union to 2 bytes */ @@ -6035,6 +6097,7 @@ enum keyboard_button_type { KEYBOARD_BUTTON_COUNT }; + /*****************************************************************************/ /* * "Get the Keyboard Config". An EC implementing this command is expected to be @@ -6113,6 +6176,164 @@ struct ec_response_keybd_config { } __ec_align1; +/* + * Configure smart discharge + */ +#define EC_CMD_SMART_DISCHARGE 0x012B + +#define EC_SMART_DISCHARGE_FLAGS_SET BIT(0) + +/* Discharge rates when the system is in cutoff or hibernation. */ +struct discharge_rate { + uint16_t cutoff; /* Discharge rate (uA) in cutoff */ + uint16_t hibern; /* Discharge rate (uA) in hibernation */ +}; + +struct smart_discharge_zone { + /* When the capacity (mAh) goes below this, EC cuts off the battery. */ + int cutoff; + /* When the capacity (mAh) is below this, EC stays up. */ + int stayup; +}; + +struct ec_params_smart_discharge { + uint8_t flags; /* EC_SMART_DISCHARGE_FLAGS_* */ + /* + * Desired hours for the battery to survive before reaching 0%. Set to + * zero to disable smart discharging. That is, the system hibernates as + * soon as the G3 idle timer expires. + */ + uint16_t hours_to_zero; + /* Set both to zero to keep the current rates. */ + struct discharge_rate drate; +}; + +struct ec_response_smart_discharge { + uint16_t hours_to_zero; + struct discharge_rate drate; + struct smart_discharge_zone dzone; +}; + +/*****************************************************************************/ +/* Voltage regulator controls */ + +/* + * Get basic info of voltage regulator for given index. + * + * Returns the regulator name and supported voltage list in mV. + */ +#define EC_CMD_REGULATOR_GET_INFO 0x012C + +/* Maximum length of regulator name */ +#define EC_REGULATOR_NAME_MAX_LEN 16 + +/* Maximum length of the supported voltage list. */ +#define EC_REGULATOR_VOLTAGE_MAX_COUNT 16 + +struct ec_params_regulator_get_info { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_info { + char name[EC_REGULATOR_NAME_MAX_LEN]; + uint16_t num_voltages; + uint16_t voltages_mv[EC_REGULATOR_VOLTAGE_MAX_COUNT]; +} __ec_align2; + +/* + * Configure the regulator as enabled / disabled. + */ +#define EC_CMD_REGULATOR_ENABLE 0x012D + +struct ec_params_regulator_enable { + uint32_t index; + uint8_t enable; +} __ec_align4; + +/* + * Query if the regulator is enabled. + * + * Returns 1 if the regulator is enabled, 0 if not. + */ +#define EC_CMD_REGULATOR_IS_ENABLED 0x012E + +struct ec_params_regulator_is_enabled { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_is_enabled { + uint8_t enabled; +} __ec_align1; + +/* + * Set voltage for the voltage regulator within the range specified. + * + * The driver should select the voltage in range closest to min_mv. + * + * Also note that this might be called before the regulator is enabled, and the + * setting should be in effect after the regulator is enabled. + */ +#define EC_CMD_REGULATOR_SET_VOLTAGE 0x012F + +struct ec_params_regulator_set_voltage { + uint32_t index; + uint32_t min_mv; + uint32_t max_mv; +} __ec_align4; + +/* + * Get the currently configured voltage for the voltage regulator. + * + * Note that this might be called before the regulator is enabled, and this + * should return the configured output voltage if the regulator is enabled. + */ +#define EC_CMD_REGULATOR_GET_VOLTAGE 0x0130 + +struct ec_params_regulator_get_voltage { + uint32_t index; +} __ec_align4; + +struct ec_response_regulator_get_voltage { + uint32_t voltage_mv; +} __ec_align4; + +/* + * Gather all discovery information for the given port and partner type. + * + * Note that if discovery has not yet completed, only the currently completed + * responses will be filled in. If the discovery data structures are changed + * in the process of the command running, BUSY will be returned. + * + * VDO field sizes are set to the maximum possible number of VDOs a VDM may + * contain, while the number of SVIDs here is selected to fit within the PROTO2 + * maximum parameter size. + */ +#define EC_CMD_TYPEC_DISCOVERY 0x0131 + +enum typec_partner_type { + TYPEC_PARTNER_SOP = 0, + TYPEC_PARTNER_SOP_PRIME = 1, +}; + +struct ec_params_typec_discovery { + uint8_t port; + uint8_t partner_type; /* enum typec_partner_type */ +} __ec_align1; + +struct svid_mode_info { + uint16_t svid; + uint16_t mode_count; /* Number of modes partner sent */ + uint32_t mode_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ +}; + +struct ec_response_typec_discovery { + uint8_t identity_count; /* Number of identity VDOs partner sent */ + uint8_t svid_count; /* Number of SVIDs partner sent */ + uint16_t reserved; + uint32_t discovery_vdo[6]; /* Max VDOs allowed after VDM header is 6 */ + struct svid_mode_info svids[0]; +} __ec_align1; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ @@ -6156,6 +6377,8 @@ struct ec_params_fp_passthru { #define FP_MODE_MATCH BIT(6) /* Reset and re-initialize the sensor. */ #define FP_MODE_RESET_SENSOR BIT(7) +/* Sensor maintenance for dead pixels. */ +#define FP_MODE_SENSOR_MAINTENANCE BIT(8) /* special value: don't change anything just read back current mode */ #define FP_MODE_DONT_CHANGE BIT(31) @@ -6167,6 +6390,7 @@ struct ec_params_fp_passthru { FP_MODE_ENROLL_IMAGE | \ FP_MODE_MATCH | \ FP_MODE_RESET_SENSOR | \ + FP_MODE_SENSOR_MAINTENANCE | \ FP_MODE_DONT_CHANGE) /* Capture types defined in bits [30..28] */ -- cgit v1.2.3