From 6fb43c85f185e34dacb65f0b56dd1b4ee1c19cda Mon Sep 17 00:00:00 2001 From: Richard Smith Date: Wed, 1 Nov 2006 14:21:31 +0000 Subject: drop unsupported unfinished mainboard Advantech SOM GX DB533-C Signed-off-by: Richard Smith Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2483 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/advantech/som_gx533c/Config.lb | 143 --------------------- src/mainboard/advantech/som_gx533c/Options.lb | 160 ------------------------ src/mainboard/advantech/som_gx533c/auto.c | 134 -------------------- src/mainboard/advantech/som_gx533c/chip.h | 5 - src/mainboard/advantech/som_gx533c/cmos.layout | 74 ----------- src/mainboard/advantech/som_gx533c/debug.c | 66 ---------- src/mainboard/advantech/som_gx533c/failover.c | 32 ----- src/mainboard/advantech/som_gx533c/irq_tables.c | 31 ----- src/mainboard/advantech/som_gx533c/mainboard.c | 12 -- src/mainboard/advantech/som_gx533c/reset.c | 43 ------- 10 files changed, 700 deletions(-) delete mode 100644 src/mainboard/advantech/som_gx533c/Config.lb delete mode 100644 src/mainboard/advantech/som_gx533c/Options.lb delete mode 100644 src/mainboard/advantech/som_gx533c/auto.c delete mode 100644 src/mainboard/advantech/som_gx533c/chip.h delete mode 100644 src/mainboard/advantech/som_gx533c/cmos.layout delete mode 100644 src/mainboard/advantech/som_gx533c/debug.c delete mode 100644 src/mainboard/advantech/som_gx533c/failover.c delete mode 100644 src/mainboard/advantech/som_gx533c/irq_tables.c delete mode 100644 src/mainboard/advantech/som_gx533c/mainboard.c delete mode 100644 src/mainboard/advantech/som_gx533c/reset.c (limited to 'src/mainboard/advantech') diff --git a/src/mainboard/advantech/som_gx533c/Config.lb b/src/mainboard/advantech/som_gx533c/Config.lb deleted file mode 100644 index 556e3ccf14..0000000000 --- a/src/mainboard/advantech/som_gx533c/Config.lb +++ /dev/null @@ -1,143 +0,0 @@ -## -## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end - -## -## Compute the start location and size size of -## The linuxBIOS bootloader. -## -default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) - -## -## Compute where this copy of linuxBIOS will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up linuxBIOS, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o - -if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o - -## -## Romcc output -## -makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" -end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" -end - -## -## Build our 16 bit and 32 bit linuxBIOS entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where linuxBIOS is entered) -## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of linuxBIOS startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds - mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu/enable_fpu.inc -mainboardinit ./auto.inc - -## -## Include the secondary Configuration files -## -dir /pc80 -config chip.h - -chip northbridge/amd/gx2 - device pci_domain 0 on - device pci 0.0 on end - chip southbridge/amd/cs5535 - device pci 12.0 on - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 off end # Audio - device pci 12.4 off end # VGA - end - end - end - - chip cpu/amd/model_gx2 - end - -end - diff --git a/src/mainboard/advantech/som_gx533c/Options.lb b/src/mainboard/advantech/som_gx533c/Options.lb deleted file mode 100644 index df3d1bdfb6..0000000000 --- a/src/mainboard/advantech/som_gx533c/Options.lb +++ /dev/null @@ -1,160 +0,0 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HAVE_OPTION_TABLE -uses USE_OPTION_TABLE -uses CONFIG_ROM_STREAM -uses IRQ_SLOT_COUNT -uses MAINBOARD -uses MAINBOARD_VENDOR -uses MAINBOARD_PART_NUMBER -uses LINUXBIOS_EXTRA_VERSION -uses ARCH -uses FALLBACK_SIZE -uses STACK_SIZE -uses HEAP_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses _RAMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses HAVE_MP_TABLE -uses CROSS_COMPILE -uses CC -uses HOSTCC -uses OBJCOPY -uses DEFAULT_CONSOLE_LOGLEVEL -uses MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses TTYS0_BAUD -uses TTYS0_BASE -uses TTYS0_LCS -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 256*1024 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## no MP table -## -default HAVE_MP_TABLE=0 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=0 - -## Delay timer options -## -default CONFIG_UDELAY_TSC=1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=2 -#object irq_tables.o - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=0 - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 -default FALLBACK_SIZE = 131072 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE -default USE_OPTION_TABLE = 0 - -default _RAMBASE = 0x00004000 - -default CONFIG_ROM_STREAM = 1 - -## -## The default compiler -## -default CROSS_COMPILE="" -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=8 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=8 - -end - diff --git a/src/mainboard/advantech/som_gx533c/auto.c b/src/mainboard/advantech/som_gx533c/auto.c deleted file mode 100644 index 138ca720a3..0000000000 --- a/src/mainboard/advantech/som_gx533c/auto.c +++ /dev/null @@ -1,134 +0,0 @@ -#define ASSEMBLY 1 - -#include -#include -#include -#include -#include -#include -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "ram/ramtest.c" -#include "superio/nsc/pc87360/pc87360_early_serial.c" -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include - -#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) - -#include "southbridge/amd/cs5535/cs5535_early_smbus.c" -#include "southbridge/amd/cs5535/cs5535_early_setup.c" -#include "northbridge/amd/gx2/raminit.h" - -/* this has to be done on a per-mainboard basis, esp. if you don't have smbus */ -static void sdram_set_spd_registers(const struct mem_controller *ctrl) -{ - msr_t msr; - /* 1. Initialize GLMC registers base on SPD values, - * Hard coded as XpressROM for now */ - //print_debug("sdram_enable step 1\r\n"); - msr = rdmsr(0x20000018); - msr.hi = 0x10075012; - msr.lo = 0x3900; - wrmsr(0x20000018, msr); - - msr = rdmsr(0x20000019); - msr.hi = 0x18000008; - msr.lo = 0x696332a3; - wrmsr(0x20000019, msr); - -} - -#include "northbridge/amd/gx2/raminit.c" -#include "sdram/generic_sdram.c" - -#define PLLMSRhi 0x00000226 -#define PLLMSRlo 0x00000008 -#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24)) -#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0)) -#include "northbridge/amd/gx2/pll_reset.c" - - -static void msr_init(void) -{ - __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02); - - __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000); - __builtin_wrmsr(0x10000026, 0x400fffc0, 0x2cfbc040); - __builtin_wrmsr(0x10000027, 0xfff00000, 0xff); - __builtin_wrmsr(0x10000028, 0x7bf00100, 0x2000000f); - __builtin_wrmsr(0x1000002c, 0xff030003, 0x20000000); - - __builtin_wrmsr(0x10000080, 0x3, 0x0); - - __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000); - __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000); - __builtin_wrmsr(0x40000023, 0x400fffc0, 0x20000040); - __builtin_wrmsr(0x40000024, 0xff4ffffc, 0x200000ef); - __builtin_wrmsr(0x40000029, 0x7bf00100, 0x2000000f); - __builtin_wrmsr(0x4000002d, 0xff030003, 0x20000000); - - - __builtin_wrmsr(0x50002001, 0x27, 0x0); - __builtin_wrmsr(0x4c002001, 0x1, 0x0); -} - - -static void main(unsigned long bist) -{ - static const struct mem_controller memctrl [] = { - {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}} - }; - unsigned char temp; - - msr_init(); - - pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); - uart_init(); - console_init(); - - cs5535_early_setup(); - print_err("done cs5535 early\n"); - pll_reset(); - print_err("done pll_reset\n"); - /* Halt if there was a built in self test failure */ - //report_bist_failure(bist); - - sdram_initialize(1, memctrl); - - print_err("Done sdram_initialize\n"); - print_err("Disable watchdog\n"); - outb( 0x87, 0x4E); //enter SuperIO configuration mode - outb( 0x87, 0x4E); - - - outb(0x20, 0x4e); - temp = inb(0x4f); - print_debug_hex8(temp); - if (temp != 0x52){ - print_err("CAN NOT READ SUPERIO VID\n"); - } - - outb(0x29, 0x4e); - outb(0x7c, 0x4f); - - outb( 0x07, 0x4E); //enable logical device 9 - outb( 0x09, 0x4F); - outb(0x30, 0x4e); - outb(1, 0x4f); - outb( 0xF0, 0x4E); //set GP33 as outbut in configuration register F0h Bit4 = \u20180\u2019 - outb( 0xC7, 0x4F); - outb( 0xF1, 0x4E); //clr GP33 (Bit4) value in cofiguration register F1h to \u20181\u2019 disables - temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged! - print_debug_hex8(temp);print_debug(":"); - temp = temp & ~8; - outb( temp, 0x4F); - temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged! - print_debug_hex8(temp);print_debug("\n"); - /* Check all of memory */ -// ram_check(0, 16384); -// ram_check(0x20000, 0x24000); -// ram_check(0x00000000, 640*1024); - -} diff --git a/src/mainboard/advantech/som_gx533c/chip.h b/src/mainboard/advantech/som_gx533c/chip.h deleted file mode 100644 index 45e8068522..0000000000 --- a/src/mainboard/advantech/som_gx533c/chip.h +++ /dev/null @@ -1,5 +0,0 @@ -extern struct chip_operations mainboard_advantech_som_gx533c_ops; - -struct mainboard_advantech_som_gx533c_config { - int nothing; -}; diff --git a/src/mainboard/advantech/som_gx533c/cmos.layout b/src/mainboard/advantech/som_gx533c/cmos.layout deleted file mode 100644 index 5ba4c032c1..0000000000 --- a/src/mainboard/advantech/som_gx533c/cmos.layout +++ /dev/null @@ -1,74 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 - - diff --git a/src/mainboard/advantech/som_gx533c/debug.c b/src/mainboard/advantech/som_gx533c/debug.c deleted file mode 100644 index 7eeabdef47..0000000000 --- a/src/mainboard/advantech/som_gx533c/debug.c +++ /dev/null @@ -1,66 +0,0 @@ - -static void print_debug_pci_dev(unsigned dev) -{ - print_debug("PCI: "); - print_debug_hex8((dev >> 16) & 0xff); - print_debug_char(':'); - print_debug_hex8((dev >> 11) & 0x1f); - print_debug_char('.'); - print_debug_hex8((dev >> 8) & 7); -} - -static void print_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - print_debug_pci_dev(dev); - print_debug("\r\n"); - } -} - -static void dump_pci_device(unsigned dev) -{ - int i; - print_debug_pci_dev(dev); - print_debug("\r\n"); - - for(i = 0; i <= 255; i++) { - unsigned char val; - if ((i & 0x0f) == 0) { - print_debug_hex8(i); - print_debug_char(':'); - } - val = pci_read_config8(dev, i); - print_debug_char(' '); - print_debug_hex8(val); - if ((i & 0x0f) == 0x0f) { - print_debug("\r\n"); - } - } -} - -static void dump_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - dump_pci_device(dev); - } -} diff --git a/src/mainboard/advantech/som_gx533c/failover.c b/src/mainboard/advantech/som_gx533c/failover.c deleted file mode 100644 index bdcb9eaed2..0000000000 --- a/src/mainboard/advantech/som_gx533c/failover.c +++ /dev/null @@ -1,32 +0,0 @@ -#define ASSEMBLY 1 -#include -#include -#include -#include -#include "arch/romcc_io.h" -#include "pc80/mc146818rtc_early.c" - -static unsigned long main(unsigned long bist) -{ - /* This is the primary cpu how should I boot? */ - if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - cpu_reset: - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -} diff --git a/src/mainboard/advantech/som_gx533c/irq_tables.c b/src/mainboard/advantech/som_gx533c/irq_tables.c deleted file mode 100644 index 636f129119..0000000000 --- a/src/mainboard/advantech/som_gx533c/irq_tables.c +++ /dev/null @@ -1,31 +0,0 @@ -/* This file was generated by getpir.c, do not modify! - (but if you do, please run checkpir on it to verify) - * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up - * - * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM -*/ - -#include - -const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*2, /* there can be total 2 devices on the bus */ - 0x00, /* Where the interrupt router lies (bus) */ - (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ - 0x800, /* IRQs devoted exclusively to PCI usage */ - 0x1078, /* Vendor */ - 0x2, /* Device */ - 0, /* Crap (miniport) */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ - { - /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ - {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0}, - {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0}, - } -}; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr); -} diff --git a/src/mainboard/advantech/som_gx533c/mainboard.c b/src/mainboard/advantech/som_gx533c/mainboard.c deleted file mode 100644 index 31d03455b4..0000000000 --- a/src/mainboard/advantech/som_gx533c/mainboard.c +++ /dev/null @@ -1,12 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include "chip.h" - -struct chip_operations mainboard_advantech_som_gx533c_ops = { - CHIP_NAME("Advantech SOM GX DB533-C mainboard") -}; - diff --git a/src/mainboard/advantech/som_gx533c/reset.c b/src/mainboard/advantech/som_gx533c/reset.c deleted file mode 100644 index 5796e17dc8..0000000000 --- a/src/mainboard/advantech/som_gx533c/reset.c +++ /dev/null @@ -1,43 +0,0 @@ -#if 0 -//#include "arch/romcc_io.h" -#include - -typedef unsigned device_t; - -#define PCI_DEV(BUS, DEV, FN) ( \ - (((BUS) & 0xFF) << 16) | \ - (((DEV) & 0x1f) << 11) | \ - (((FN) & 0x7) << 8)) - -static void pci_write_config8(device_t dev, unsigned where, unsigned char value) -{ - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - outb(value, 0xCFC + (addr & 3)); -} - -static void pci_write_config32(device_t dev, unsigned where, unsigned value) -{ - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - outl(value, 0xCFC); -} - -static unsigned pci_read_config32(device_t dev, unsigned where) -{ - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - return inl(0xCFC); -} - -#include "../../../northbridge/amd/amdk8/reset_test.c" - -void hard_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1); -} -#endif -- cgit v1.2.3