From 31d04e6e0dd6105f67a28a42634c806a548d8930 Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Tue, 2 Jul 2019 17:13:19 -0700 Subject: mainboard/amd: Add padmelon board code Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh), but as the needed binaries are not yet merged (commit 33615), a config HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available, the board defaults to Prairie Falcon, which use the same binaries as Stoney Ridge. Once the binaries are merged, the config will be eliminated. Fan control is done through F81803A SIO, and IRQ/GPIO and other board characteristics are the same regardless of Merlin Falcon or Prairie Falcon. Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin Falcon. The requested development was for Merlin Falcon. There are some small spec changes (such as number of memory channels) between SOCs. Brown Falcon was not investigated, Prairie Falcon is very similar to Stoney Ridge. Started from Gardenia code, added changes created by Marc Jones and finally revised against schematic, which added changes to GPIO settings. BUG=none. TEST=Both versions tested and boot to Linux using SeaBIOS. Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held --- src/mainboard/amd/padmelon/acpi_tables.c | 3 +++ 1 file changed, 3 insertions(+) create mode 100644 src/mainboard/amd/padmelon/acpi_tables.c (limited to 'src/mainboard/amd/padmelon/acpi_tables.c') diff --git a/src/mainboard/amd/padmelon/acpi_tables.c b/src/mainboard/amd/padmelon/acpi_tables.c new file mode 100644 index 0000000000..e06f6a648d --- /dev/null +++ b/src/mainboard/amd/padmelon/acpi_tables.c @@ -0,0 +1,3 @@ +/* + * Blank file required by build system assumptions of this file being present. + */ -- cgit v1.2.3