From 0735142bdd2aba4cf47ee5ddde6f9696b55f9791 Mon Sep 17 00:00:00 2001 From: Zheng Bao Date: Fri, 26 Mar 2010 01:43:30 +0000 Subject: 1. Remove warnings and multiple blank lines. 2. Mahogany uses GPIO9 to detect 80-pin IDE cable. Signed-off-by: Zheng Bao Acked-by: Patrick Georgi git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5300 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/amd/mahogany/acpi_tables.c | 7 +++++++ src/mainboard/amd/mahogany/devicetree.cb | 1 - src/mainboard/amd/mahogany/get_bus_conf.c | 2 ++ src/mainboard/amd/mahogany/mainboard.c | 24 ++++++++++++++++-------- src/mainboard/amd/mahogany_fam10/Kconfig | 2 +- src/mainboard/amd/mahogany_fam10/acpi_tables.c | 9 ++++++--- src/mainboard/amd/mahogany_fam10/devicetree.cb | 2 -- src/mainboard/amd/mahogany_fam10/mainboard.c | 24 ++++++++++++++++-------- src/mainboard/amd/mahogany_fam10/romstage.c | 1 - 9 files changed, 48 insertions(+), 24 deletions(-) (limited to 'src/mainboard/amd') diff --git a/src/mainboard/amd/mahogany/acpi_tables.c b/src/mainboard/amd/mahogany/acpi_tables.c index 248c0f888e..ec99acf193 100644 --- a/src/mainboard/amd/mahogany/acpi_tables.c +++ b/src/mainboard/amd/mahogany/acpi_tables.c @@ -101,6 +101,7 @@ unsigned long acpi_fill_madt(unsigned long current) extern void get_bus_conf(void); +#if CONFIG_ACPI_SSDTX_NUM >= 1 static void update_ssdtx(void *ssdtx, int i) { uint8_t *PCI; @@ -122,6 +123,7 @@ static void update_ssdtx(void *ssdtx, int i) /* FIXME: need to update the GSI id in the ssdtx too */ } +#endif unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) { k8acpi_write_vars(); @@ -140,6 +142,11 @@ unsigned long write_acpi_tables(unsigned long start) acpi_facs_t *facs; acpi_header_t *dsdt; acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 + acpi_header_t *ssdtx; + acpi_header_t const *p; + int i; +#endif get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */ diff --git a/src/mainboard/amd/mahogany/devicetree.cb b/src/mainboard/amd/mahogany/devicetree.cb index 2cc3baf837..19979a2e91 100644 --- a/src/mainboard/amd/mahogany/devicetree.cb +++ b/src/mainboard/amd/mahogany/devicetree.cb @@ -121,4 +121,3 @@ chip northbridge/amd/amdk8/root_complex end #northbridge/amd/amdk8 end #pci_domain end #northbridge/amd/amdk8/root_complex - diff --git a/src/mainboard/amd/mahogany/get_bus_conf.c b/src/mainboard/amd/mahogany/get_bus_conf.c index f17124ba41..25d83d6005 100644 --- a/src/mainboard/amd/mahogany/get_bus_conf.c +++ b/src/mainboard/amd/mahogany/get_bus_conf.c @@ -63,6 +63,8 @@ extern void get_sblk_pci1234(void); static u32 get_bus_conf_done = 0; +void get_bus_conf(void); + void get_bus_conf(void) { u32 apicid_base; diff --git a/src/mainboard/amd/mahogany/mainboard.c b/src/mainboard/amd/mahogany/mainboard.c index ed0f50a5a4..44752f1e91 100644 --- a/src/mainboard/amd/mahogany/mainboard.c +++ b/src/mainboard/amd/mahogany/mainboard.c @@ -25,6 +25,7 @@ #include #include #include +#include #include <../southbridge/amd/sb700/sb700.h> #include "chip.h" @@ -35,6 +36,9 @@ extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, uint64_t uma_memory_base, uma_memory_size; +void set_pcie_dereset(void); +void set_pcie_reset(void); + /* * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to * pull it up before training the slot. @@ -65,12 +69,13 @@ void set_pcie_reset() pci_write_config16(sm_dev, 0xA8, word); } +#if 0 /* not tested yet */ /******************************************************** -* mahogany uses SB700 GPIO8 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to +* mahogany uses SB700 GPIO9 to detect IDE_DMA66. +* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to * get the cable type, 40 pin or 80 pin? ********************************************************/ -static void get_ide_dma66() +static void get_ide_dma66(void) { u8 byte; /*u32 sm_dev, ide_dev; */ @@ -79,27 +84,29 @@ static void get_ide_dma66() sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 4); /* Set Gpio8 as input */ + byte |= (1 << 5); /* Set Gpio9 as input */ pci_write_config8(sm_dev, 0xA9, byte); ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); byte = pci_read_config8(ide_dev, 0x56); byte &= ~(7 << 0); - if ((1 << 4) & pci_read_config8(sm_dev, 0xAA)) + if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) byte |= 2 << 0; /* mode 2 */ else byte |= 5 << 0; /* mode 5 */ pci_write_config8(ide_dev, 0x56, byte); } +#endif /* get_ide_dma66 */ /************************************************* * enable the dedicated function in mahogany board. * This function called early than rs780_enable. *************************************************/ -void mahogany_enable(device_t dev) +static void mahogany_enable(device_t dev) { - struct mainboard_config *mainboard = - (struct mainboard_config *)dev->chip_info; + /* Leave it for future. */ + /* struct mainboard_config *mainboard = + (struct mainboard_config *)dev->chip_info;*/ printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); @@ -158,6 +165,7 @@ int add_mainboard_resources(struct lb_memory *mem) lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); #endif + return 0; } struct chip_operations mainboard_ops = { diff --git a/src/mainboard/amd/mahogany_fam10/Kconfig b/src/mainboard/amd/mahogany_fam10/Kconfig index fa956eee75..2c379337dc 100644 --- a/src/mainboard/amd/mahogany_fam10/Kconfig +++ b/src/mainboard/amd/mahogany_fam10/Kconfig @@ -117,7 +117,7 @@ config HEAP_SIZE config ACPI_SSDTX_NUM int - default 31 + default 0 depends on BOARD_AMD_MAHOGANY_FAM10 config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID diff --git a/src/mainboard/amd/mahogany_fam10/acpi_tables.c b/src/mainboard/amd/mahogany_fam10/acpi_tables.c index 878141da54..203254b0db 100644 --- a/src/mainboard/amd/mahogany_fam10/acpi_tables.c +++ b/src/mainboard/amd/mahogany_fam10/acpi_tables.c @@ -92,7 +92,8 @@ unsigned long acpi_fill_madt(unsigned long current) extern void get_bus_conf(void); extern void update_ssdt(void *ssdt); - +/* not tested yet. */ +#if CONFIG_ACPI_SSDTX_NUM >= 1 static void update_ssdtx(void *ssdtx, int i) { u8 *PCI; @@ -115,6 +116,7 @@ static void update_ssdtx(void *ssdtx, int i) /* FIXME: need to update the GSI id in the ssdtx too */ } +#endif unsigned long write_acpi_tables(unsigned long start) { @@ -129,10 +131,11 @@ unsigned long write_acpi_tables(unsigned long start) acpi_facs_t *facs; acpi_header_t *dsdt; acpi_header_t *ssdt; +#if CONFIG_ACPI_SSDTX_NUM >= 1 acpi_header_t *ssdtx; acpi_header_t const *p; - int i; +#endif get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn @@ -204,7 +207,7 @@ unsigned long write_acpi_tables(unsigned long start) printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); current = acpi_add_ssdt_pstates(rsdp, current); -#if 0 //CONFIG_ACPI_SSDTX_NUM >= 1 +#if CONFIG_ACPI_SSDTX_NUM >= 1 /* same htio, but different possition? We may have to copy, change HCIN, and recalculate the checknum and add_table */ diff --git a/src/mainboard/amd/mahogany_fam10/devicetree.cb b/src/mainboard/amd/mahogany_fam10/devicetree.cb index 085fe70fa2..8478ac1165 100644 --- a/src/mainboard/amd/mahogany_fam10/devicetree.cb +++ b/src/mainboard/amd/mahogany_fam10/devicetree.cb @@ -143,5 +143,3 @@ chip northbridge/amd/amdfam10/root_complex # end end - - diff --git a/src/mainboard/amd/mahogany_fam10/mainboard.c b/src/mainboard/amd/mahogany_fam10/mainboard.c index ed0f50a5a4..82a9b9eeef 100644 --- a/src/mainboard/amd/mahogany_fam10/mainboard.c +++ b/src/mainboard/amd/mahogany_fam10/mainboard.c @@ -25,6 +25,7 @@ #include #include #include +#include #include <../southbridge/amd/sb700/sb700.h> #include "chip.h" @@ -35,6 +36,9 @@ extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type, uint64_t uma_memory_base, uma_memory_size; +void set_pcie_dereset(void); +void set_pcie_reset(void); + /* * Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to * pull it up before training the slot. @@ -65,12 +69,13 @@ void set_pcie_reset() pci_write_config16(sm_dev, 0xA8, word); } +#if 0 /* not tested yet. */ /******************************************************** -* mahogany uses SB700 GPIO8 to detect IDE_DMA66. -* IDE_DMA66 is routed to GPIO 8. So we read Gpio 8 to +* mahogany uses SB700 GPIO9 to detect IDE_DMA66. +* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to * get the cable type, 40 pin or 80 pin? ********************************************************/ -static void get_ide_dma66() +static void get_ide_dma66(void) { u8 byte; /*u32 sm_dev, ide_dev; */ @@ -79,27 +84,29 @@ static void get_ide_dma66() sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); byte = pci_read_config8(sm_dev, 0xA9); - byte |= (1 << 4); /* Set Gpio8 as input */ + byte |= (1 << 5); /* Set Gpio9 as input */ pci_write_config8(sm_dev, 0xA9, byte); ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1)); byte = pci_read_config8(ide_dev, 0x56); byte &= ~(7 << 0); - if ((1 << 4) & pci_read_config8(sm_dev, 0xAA)) + if ((1 << 5) & pci_read_config8(sm_dev, 0xAA)) byte |= 2 << 0; /* mode 2 */ else byte |= 5 << 0; /* mode 5 */ pci_write_config8(ide_dev, 0x56, byte); } +#endif /* get_ide_dma66() */ /************************************************* * enable the dedicated function in mahogany board. * This function called early than rs780_enable. *************************************************/ -void mahogany_enable(device_t dev) +static void mahogany_enable(device_t dev) { - struct mainboard_config *mainboard = - (struct mainboard_config *)dev->chip_info; + /* Leave it for furture use. */ + /* struct mainboard_config *mainboard = + (struct mainboard_config *)dev->chip_info; */ printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev); @@ -158,6 +165,7 @@ int add_mainboard_resources(struct lb_memory *mem) lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, uma_memory_size); #endif + return 0; } struct chip_operations mainboard_ops = { diff --git a/src/mainboard/amd/mahogany_fam10/romstage.c b/src/mainboard/amd/mahogany_fam10/romstage.c index 2a147fea8a..f6c862443a 100644 --- a/src/mainboard/amd/mahogany_fam10/romstage.c +++ b/src/mainboard/amd/mahogany_fam10/romstage.c @@ -298,4 +298,3 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. post_code(0x43); // Should never see this post code. } - -- cgit v1.2.3