From 62902ca45de871aa59657dd8ec1858c301595634 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Tue, 29 Nov 2016 14:13:43 +0100 Subject: sb/ich7: Use common/gpio.h to set up GPIOs This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber Reviewed-by: Patrick Rudolph Reviewed-by: Paul Menzel --- src/mainboard/apple/macbook21/romstage.c | 52 -------------------------------- 1 file changed, 52 deletions(-) (limited to 'src/mainboard/apple/macbook21/romstage.c') diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c index 391b09f6b7..962ad41577 100644 --- a/src/mainboard/apple/macbook21/romstage.c +++ b/src/mainboard/apple/macbook21/romstage.c @@ -35,58 +35,6 @@ #include #include -void setup_ich7_gpios(void) -{ - printk(BIOS_DEBUG, " GPIOS..."); - - /* X60 GPIO: - * 1: HDD_PRESENCE# - * 6: Unknown (Pulled high by R215 to VCC3B) - * 7: BDC_PRESENCE# - * 8: H8_WAKE# - * 9: RTC_BAT_IN# - * 10: Unknown (Pulled high by R700 to VCC3M) - * 12: H8SCI# - * 13: SLICE_ON_3M# - * 14: Unknown (Pulled high by R321 to VCC3) - * 15: Unknown (Pulled high by R258 to VCC3) - * 19: Unknown (Pulled low by R594) - * 21: Unknown (Pulled high by R145 to VCC3) - * 22: FWH_WP# - * 25: MDC_KILL# - * 33: HDD_PRESENCE_2# - * 35: CLKREQ_SATA# - * 36: PLANARID0 - * 37: PLANARID1 - * 38: PLANARID2 - * 39: PLANARID3 - * 48: FWH_TBL# - */ -#if (CONFIG_BOARD_APPLE_MACBOOK11 || CONFIG_BOARD_APPLE_MACBOOK21) - outl(0x1f40f7e2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xfea8af83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfcc06bdf, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00002082, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -#else /* CONFIG_BOARD_APPLE_IMAC52 */ - outl(0x1f40f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ - outl(0xfea8af83, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ - outl(0xfcc06bff, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ - /* Output Control Registers */ - outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ - /* Input Control Registers */ - outl(0x00000082, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ - outl(0x000100c8, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ - outl(0x00000030, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ - outl(0x000100c0, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ -#endif -} - static void ich7_enable_lpc(void) { /* Enable Serial IRQ */ -- cgit v1.2.3