From 65ddbb720b1d5e7bcf32a3e112f06f5afbeb1100 Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Sat, 19 May 2018 17:42:49 +0200 Subject: mb/asus/p8h61-m_pro: Add new mainboard Tested with GRUB 2.02 as a payload, booting Arch Linux as well as Debian. This code is based on the output of autoport as well as other mainboards supported in coreboot already. Working: - Serial port I/O - S3 suspend/resume. Untested with SeaBIOS since it failed to resume on a similar board. It is likely to be due to low memory corruption, but I have not worked on it. - USB ports and headers - USB3 ports attached to the ASM1042 controller. SeaBIOS can boot from them, and it is likely GRUB can detect devices on those ports as well. The chip has a small SPI flash nearby, which seems to hold an Option ROM. - Gigabit Ethernet - Integrated graphics (libgfxinit) - VGA BIOS for integrated graphics init - PCIe x16 graphics - PCIe x1 - SATA controller - Hardware Monitor - Fan Control (fancontrol on linux works well) - Native raminit - flashrom, using the internal programmer. Tested with coreboot, as well as with the vendor firmware. - NVRAM settings. Only debug_level has been tested. Untested: - DVI port. It can detect a "fake" display, that is, an EEPROM connected to the DVI port. Thus, gma-mainboard.ads has been setup accordingly. - PS/2 port. - Audio: Only rear output (green) has been tested. - EHCI debug. - Parallel port header. - Non-Linux OSes - ACPI thermal zone and fan control (probably not working) Not working: - Booting from devices attached to the ASM1061 controller. Devices on ports work fine once Linux has loaded. - Any SATA devices with Tianocore (payload issue) Change-Id: I7e89ebe43a2e1ff0308f4876e98bbf2f5a0d85f2 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/26419 Reviewed-by: Nico Huber Reviewed-by: Paul Menzel Tested-by: build bot (Jenkins) --- src/mainboard/asus/p8h61-m_pro/romstage.c | 84 +++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 src/mainboard/asus/p8h61-m_pro/romstage.c (limited to 'src/mainboard/asus/p8h61-m_pro/romstage.c') diff --git a/src/mainboard/asus/p8h61-m_pro/romstage.c b/src/mainboard/asus/p8h61-m_pro/romstage.c new file mode 100644 index 0000000000..a6785ed418 --- /dev/null +++ b/src/mainboard/asus/p8h61-m_pro/romstage.c @@ -0,0 +1,84 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Angel Pons + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#define GLOBAL_DEV PNP_DEV(0x2e, 0) +#define SERIAL_DEV PNP_DEV(0x2e, NCT6776_SP1) +#define ACPI_DEV PNP_DEV(0x2e, NCT6776_ACPI) + +void pch_enable_lpc(void) +{ + /* Enable the Super IO */ + pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | + KBC_LPC_EN | LPT_LPC_EN | COMA_LPC_EN); +} + +void mainboard_rcba_config(void) +{ +} + +const struct southbridge_usb_port mainboard_usb_ports[] = { + { 1, 0, 0 }, + { 1, 0, 0 }, + { 1, 0, 1 }, + { 1, 0, 1 }, + { 1, 0, 2 }, + { 1, 0, 2 }, + { 1, 0, 3 }, + { 1, 0, 3 }, + { 1, 0, 4 }, + { 1, 0, 4 }, + { 1, 0, 6 }, + { 1, 0, 5 }, + { 1, 0, 5 }, + { 1, 0, 6 }, +}; + +void mainboard_early_init(int s3resume) +{ +} + +void mainboard_config_superio(void) +{ + /* Enable UART */ + nuvoton_pnp_enter_conf_state(GLOBAL_DEV); + + /* Select SIO pin states. */ + pnp_write_config(GLOBAL_DEV, 0x1c, 0x83); + pnp_write_config(GLOBAL_DEV, 0x24, 0x30); + pnp_write_config(GLOBAL_DEV, 0x27, 0x40); + pnp_write_config(GLOBAL_DEV, 0x2a, 0x20); + + /* Power RAM in S3. */ + pnp_set_logical_device(ACPI_DEV); + pnp_write_config(ACPI_DEV, 0xe4, 0x10); + + pnp_set_logical_device(SERIAL_DEV); + + nuvoton_pnp_exit_conf_state(GLOBAL_DEV); + + nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); +} + +void mainboard_get_spd(spd_raw_data *spd, bool id_only) +{ + read_spd(&spd[0], 0x50, id_only); + read_spd(&spd[2], 0x52, id_only); +} -- cgit v1.2.3