From 2437fe9dfab8e4056b633a39d51d07aa81ab3c9d Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Fri, 4 Oct 2019 13:59:29 +0200 Subject: sb/intel/i82801gx: Move CIR init to a common place Some boards with the G41 chipset lacked programming CIR, so this change add that to those boards too. Change-Id: Ia10c050785170fc743f7aef918f4849dbdd6840e Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/35795 Tested-by: build bot (Jenkins) Reviewed-by: HAOUAS Elyes --- src/mainboard/asus/p5gc-mx/romstage.c | 26 +------------------------- src/mainboard/asus/p5qpl-am/romstage.c | 6 +----- 2 files changed, 2 insertions(+), 30 deletions(-) (limited to 'src/mainboard/asus') diff --git a/src/mainboard/asus/p5gc-mx/romstage.c b/src/mainboard/asus/p5gc-mx/romstage.c index 632ef05573..20a2b56c51 100644 --- a/src/mainboard/asus/p5gc-mx/romstage.c +++ b/src/mainboard/asus/p5gc-mx/romstage.c @@ -145,31 +145,7 @@ static void early_ich7_init(void) reg32 |= (1 << 31) | (1 << 27); pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); - RCBA32(0x0088) = 0x0011d000; - RCBA16(0x01fc) = 0x060f; - RCBA32(0x01f4) = 0x86000040; - RCBA32(0x0214) = 0x10030509; - RCBA32(0x0218) = 0x00020504; - RCBA8(0x0220) = 0xc5; - reg32 = RCBA32(GCS); - reg32 |= (1 << 6); - RCBA32(GCS) = reg32; - reg32 = RCBA32(0x3430); - reg32 &= ~(3 << 0); - reg32 |= (1 << 0); - RCBA32(0x3430) = reg32; - RCBA16(0x0200) = 0x2008; - RCBA8(0x2027) = 0x0d; - RCBA16(0x3e08) |= (1 << 7); - RCBA16(0x3e48) |= (1 << 7); - RCBA32(0x3e0e) |= (1 << 7); - RCBA32(0x3e4e) |= (1 << 7); - - // next step only on ich7m b0 and later: - reg32 = RCBA32(0x2034); - reg32 &= ~(0x0f << 16); - reg32 |= (5 << 16); - RCBA32(0x2034) = reg32; + ich7_setup_cir(); } void mainboard_romstage_entry(void) diff --git a/src/mainboard/asus/p5qpl-am/romstage.c b/src/mainboard/asus/p5qpl-am/romstage.c index dc589a5918..30480ad3d5 100644 --- a/src/mainboard/asus/p5qpl-am/romstage.c +++ b/src/mainboard/asus/p5qpl-am/romstage.c @@ -131,7 +131,6 @@ static int setup_sio_gpio(void) static void mb_lpc_setup(void) { - u32 reg32; /* Set the value for GPIO base address register and enable GPIO. */ pci_write_config32(LPC_DEV, GPIO_BASE, (DEFAULT_GPIOBASE | 1)); pci_write_config8(LPC_DEV, GPIO_CNTL, 0x10); @@ -142,10 +141,7 @@ static void mb_lpc_setup(void) RCBA8(0x31ff) = 0x03; RCBA8(0x31ff); - reg32 = RCBA32(GCS); - reg32 |= (1 << 5); - RCBA32(GCS) = reg32; - RCBA32(CG) = 0x00000001; + ich7_setup_cir(); } static void ich7_enable_lpc(void) -- cgit v1.2.3