From 9c2255c66c20cd90f39cc08c1220d93222d5d580 Mon Sep 17 00:00:00 2001 From: Nikolay Petukhov Date: Sat, 29 Mar 2008 16:59:27 +0000 Subject: Now coreboot performs IRQ routing for some boards. You can see this by executing commands like this: grep -r pci_assign_irqs coreboot/src/* This basically AMD/LX based boards: pcengines/alix1c, digitallogic/msm800sev, artecgroup/dbe61, amd/norwich, amd/db800. Also for AMD/GX1 based boards need a patch [http://www.pengutronix.de/software/ptxdist/temporary-src/references/geode-5530.patch] for the right IRQ setup. AMD/GX1 based boards is: advantech/pcm-5820, asi/mb_5blmp, axus/tc320, bcom/winnet100, eaglelion/5bcm, iei/nova4899r, iei/juki-511p. I have two ideas. 1. Delete duplicate code from AMD/LX based boards. 2. Add IRQ routing for AMD/GX1 boards in coreboot. The pirq.patch for IRQ routing logically consist from of two parts: First part of pirq.patch independent from type chipsets and assign IRQ for ever PCI device. It part based on AMD/LX write_pirq_routing_table() function. Second part of pirq.patch depends of type chipset and set PIRQx lines in interrupt router. This part supports only CS5530/5536 interrupt routers. IRQ routing functionality is included through PIRQ_ROUTE in Config.lb. Tested on iei/juki-511p(cs5530a), iei/pcisa-lx(cs5536) and also on TeleVideo TC7020, see http://www.coreboot.org/pipermail/coreboot/2007-December/027973.html. Signed-off-by: Nikolay Petukhov Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/axus/tc320/Options.lb | 2 ++ 1 file changed, 2 insertions(+) (limited to 'src/mainboard/axus') diff --git a/src/mainboard/axus/tc320/Options.lb b/src/mainboard/axus/tc320/Options.lb index 36fde166bc..ed56fd923f 100644 --- a/src/mainboard/axus/tc320/Options.lb +++ b/src/mainboard/axus/tc320/Options.lb @@ -63,6 +63,7 @@ uses CONFIG_VIDEO_MB uses CONFIG_SPLASH_GRAPHIC uses CONFIG_GX1_VIDEO uses CONFIG_GX1_VIDEOMODE +uses PIRQ_ROUTE ## Enable VGA with a splash screen (only 640x480 to run on most monitors). ## We want to support up to 1024x768@16 so we need 2MiB video memory. @@ -82,6 +83,7 @@ default CONFIG_UDELAY_TSC = 1 default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 default HAVE_PIRQ_TABLE = 1 default IRQ_SLOT_COUNT = 2 # Soldered NIC, internal USB, no real slots +default PIRQ_ROUTE = 1 default HAVE_OPTION_TABLE = 0 default ROM_IMAGE_SIZE = 64 * 1024 default FALLBACK_SIZE = 128 * 1024 -- cgit v1.2.3