From 8fbfcc3a06d2dde8aa625db123b42cfe29aa0752 Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Mon, 30 Mar 2020 23:20:32 -0500 Subject: mb/google/cyan: convert to overridetree Simply cyan variants by converting to overridetree format. A few differences were ignored as there appears to be no reason behind them: - cyan had PCIe RP2 enabled, but nothing is attached to it - kefka had the SPI 1 device disabled - reks, relm, and ultima had HSUART 1 disabled - edgar had I2C1 UPD disabled Test: build/boot cyan and edgar variants, verify everything still works Change-Id: I9928cc59adcfda4661ddfdfa95f53a7820053b4a Signed-off-by: Matt DeVillier Reviewed-on: https://review.coreboot.org/c/coreboot/+/39964 Reviewed-by: Angel Pons Tested-by: build bot (Jenkins) --- .../google/cyan/variants/relm/devicetree.cb | 146 --------------------- .../google/cyan/variants/relm/overridetree.cb | 8 ++ 2 files changed, 8 insertions(+), 146 deletions(-) delete mode 100644 src/mainboard/google/cyan/variants/relm/devicetree.cb create mode 100644 src/mainboard/google/cyan/variants/relm/overridetree.cb (limited to 'src/mainboard/google/cyan/variants/relm') diff --git a/src/mainboard/google/cyan/variants/relm/devicetree.cb b/src/mainboard/google/cyan/variants/relm/devicetree.cb deleted file mode 100644 index e1bbb0ac5b..0000000000 --- a/src/mainboard/google/cyan/variants/relm/devicetree.cb +++ /dev/null @@ -1,146 +0,0 @@ -chip soc/intel/braswell - - ############################################################ - # Set the parameters for MemoryInit - ############################################################ - - register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB - - register "PcdMrcInitMmioSize" = "0x0800" - register "PcdMrcInitSpdAddr1" = "0xa0" - register "PcdMrcInitSpdAddr2" = "0xa2" - register "PcdIgdDvmt50PreAlloc" = "1" - register "PcdApertureSize" = "2" - register "PcdGttSize" = "1" - register "PcdDvfsEnable" = "1" - register "PcdCaMirrorEn" = "1" - - ############################################################ - # Set the parameters for SiliconInit - ############################################################ - - register "PcdSdcardMode" = "PCH_ACPI_MODE" - register "PcdEnableHsuart0" = "0" - register "PcdEnableHsuart1" = "1" - register "PcdEnableAzalia" = "1" - register "PcdEnableXhci" = "1" - register "PcdEnableLpe" = "1" - register "PcdEnableDma0" = "1" - register "PcdEnableDma1" = "1" - register "PcdEnableI2C0" = "1" - register "PcdEnableI2C1" = "1" - register "PcdEnableI2C2" = "0" - register "PcdEnableI2C3" = "0" - register "PcdEnableI2C4" = "1" - register "PcdEnableI2C5" = "1" - register "PcdEnableI2C6" = "0" - register "PunitPwrConfigDisable" = "0" # Enable SVID - register "ChvSvidConfig" = "SVID_PMIC_CONFIG" - register "PcdEmmcMode" = "PCH_ACPI_MODE" - register "PcdUsb3ClkSsc" = "1" - register "PcdDispClkSsc" = "1" - register "PcdSataClkSsc" = "1" - register "PcdEnableSata" = "0" # Disable SATA - register "Usb2Port0PerPortPeTxiSet" = "7" - register "Usb2Port0PerPortTxiSet" = "5" - register "Usb2Port0IUsbTxEmphasisEn" = "2" - register "Usb2Port0PerPortTxPeHalf" = "1" - register "Usb2Port1PerPortPeTxiSet" = "7" - register "Usb2Port1PerPortTxiSet" = "3" - register "Usb2Port1IUsbTxEmphasisEn" = "2" - register "Usb2Port1PerPortTxPeHalf" = "1" - register "Usb2Port2PerPortPeTxiSet" = "7" - register "Usb2Port2PerPortTxiSet" = "3" - register "Usb2Port2IUsbTxEmphasisEn" = "2" - register "Usb2Port2PerPortTxPeHalf" = "1" - register "Usb2Port3PerPortPeTxiSet" = "7" - register "Usb2Port3PerPortTxiSet" = "3" - register "Usb2Port3IUsbTxEmphasisEn" = "2" - register "Usb2Port3PerPortTxPeHalf" = "1" - register "Usb2Port4PerPortPeTxiSet" = "7" - register "Usb2Port4PerPortTxiSet" = "3" - register "Usb2Port4IUsbTxEmphasisEn" = "2" - register "Usb2Port4PerPortTxPeHalf" = "1" - register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a" - register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64" - register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a" - register "PcdSataInterfaceSpeed" = "3" - register "PcdPchSsicEnable" = "1" - register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM - register "PMIC_I2CBus" = "1" - register "ISPEnable" = "0" # Disable IUNIT - register "ISPPciDevConfig" = "3" - register "PcdSdDetectChk" = "0" # Disable SD card detect - register "I2C0Frequency" = "1" - register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz - register "I2C2Frequency" = "1" - register "I2C3Frequency" = "1" - register "I2C4Frequency" = "1" - register "I2C5Frequency" = "1" - register "I2C6Frequency" = "1" - - # LPE audio codec settings - register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock - - # Enable devices in ACPI mode - register "lpss_acpi_mode" = "1" - register "emmc_acpi_mode" = "1" - register "sd_acpi_mode" = "1" - register "lpe_acpi_mode" = "1" - - # Disable SLP_X stretching after SUS power well fail. - register "disable_slp_x_stretch_sus_fail" = "1" - - # Allow PCIe devices to wake system from suspend - register "pcie_wake_enable" = "1" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - # EDS Table 24-4, Figure 24-5 - device pci 00.0 on end # 8086 2280 - SoC transaction router - device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display - device pci 03.0 off end # 8086 22b8 - Camera and Image Processor - device pci 0b.0 on end # 8086 22dc - ? - device pci 10.0 on end # 8086 2294 - MMC Port - device pci 11.0 off end # 8086 0F15 - SDIO Port - device pci 12.0 on end # 8086 0F16 - SD Port - device pci 13.0 off end # 8086 22a3 - Sata controller - device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time - device pci 15.0 on end # 8086 22a8 - LP Engine Audio - device pci 16.0 off end # 8086 22b7 - USB device - device pci 18.0 on end # 8086 22c0 - SIO - DMA - device pci 18.1 on end # 8086 22c1 - I2C Port 1 - device pci 18.2 on end # 8086 22c2 - I2C Port 2 - device pci 18.3 off end # 8086 22c3 - I2C Port 3 - device pci 18.4 off end # 8086 22c4 - I2C Port 4 - device pci 18.5 on end # 8086 22c5 - I2C Port 5 - device pci 18.6 on end # 8086 22c6 - I2C Port 6 - device pci 18.7 off end # 8086 22c7 - I2C Port 7 - device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine - device pci 1b.0 on end # 8086 0F04 - HD Audio - device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1 - device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2 - device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3 - device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4 - device pci 1e.0 on end # 8086 2286 - SIO - DMA - device pci 1e.1 off end # 8086 0F08 - PWM 1 - device pci 1e.2 off end # 8086 0F09 - PWM 2 - device pci 1e.3 off end # 8086 228a - HSUART 1 - device pci 1e.4 off end # 8086 228c - HSUART 2 - device pci 1e.5 on end # 8086 228e - SPI 1 - device pci 1e.6 off end # 8086 2290 - SPI 2 - device pci 1e.7 off end # 8086 22ac - SPI 3 - device pci 1f.0 on # 8086 229c - LPC bridge - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - chip ec/google/chromeec - device pnp 0c09.0 on end - end - end # LPC Bridge - device pci 1f.3 off end # 8086 0F12 - SMBus 0 - end -end diff --git a/src/mainboard/google/cyan/variants/relm/overridetree.cb b/src/mainboard/google/cyan/variants/relm/overridetree.cb new file mode 100644 index 0000000000..41908e0d4c --- /dev/null +++ b/src/mainboard/google/cyan/variants/relm/overridetree.cb @@ -0,0 +1,8 @@ +chip soc/intel/braswell + + register "PcdEnableI2C0" = "1" # Touchscreen + + device domain 0 on + device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen + end +end -- cgit v1.2.3