From e34c80256e184ca8886558dc7cc2ec4c4b37d31b Mon Sep 17 00:00:00 2001 From: Sumeet Pawnikar Date: Tue, 30 Jul 2019 15:03:40 +0530 Subject: mb/google/hatch/variants: Increase touchscreen reset delay to 120ms During boot sequence sometime touchscreen reset keeps failing. Also, kernel dmesg shows "dmesg:i2c_hid i2c-GDIX0000:00: failed to reset device" message. This adds around 4 more seconds to the boot sequence. Setting the appropriate delay of 120ms between enable and reset for Goodix Touchscreen helps to synchronize and address this failure. This value is 120 ms as per Goodix Spec. BUG=b:138413748 BRANCH=None TEST=Built and tested on Hatch system Change-Id: I15005c568f285ec7bad9a0bec4498e2fdd20782b Signed-off-by: Sumeet Pawnikar Reviewed-on: https://review.coreboot.org/c/coreboot/+/34626 Reviewed-by: V Sowmya Reviewed-by: Paul Fagerburg Reviewed-by: Subrata Banik Reviewed-by: Tim Wawrzynczak Tested-by: build bot (Jenkins) --- src/mainboard/google/hatch/variants/hatch/overridetree.cb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/mainboard/google/hatch') diff --git a/src/mainboard/google/hatch/variants/hatch/overridetree.cb b/src/mainboard/google/hatch/variants/hatch/overridetree.cb index e40a566482..880d19fab1 100644 --- a/src/mainboard/google/hatch/variants/hatch/overridetree.cb +++ b/src/mainboard/google/hatch/variants/hatch/overridetree.cb @@ -89,7 +89,7 @@ chip soc/intel/cannonlake register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" - register "generic.reset_delay_ms" = "10" + register "generic.reset_delay_ms" = "120" register "generic.reset_off_delay_ms" = "3" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" register "generic.enable_delay_ms" = "12" -- cgit v1.2.3