From fad3703ce80011ccc0eaef03fb0575f591085d5f Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Thu, 5 Dec 2013 12:40:08 -0600 Subject: rambi: configure SD card signals MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rambi 1.5 boards use the native SD card controller on baytrail. Therefore, enable those signals. The CLK, D*, and CMD pins use 2K pulls as these were shown to not exhibit any errors when doing reads or writes to a DDR50 sd card. Note that if a servo is connected on needs to enable the sd_vref_sel rail to pp1800 as this causes issues with card detect if it is not set to pp1800. BUG=chrome-os-partner:24312 BRANCH=None TEST=Built and booted. Tested sd card read and write works in kernel. Also noted that write protect detection works as well. Change-Id: I520e2808acbd8494534fcb710411dbc0e12fc874 Signed-off-by: Aaron Durbin Reviewed-on: https://chromium-review.googlesource.com/178961 Reviewed-by: Shawn Nematbakhsh Reviewed-on: http://review.coreboot.org/4990 Reviewed-by: Kyösti Mälkki Tested-by: build bot (Jenkins) --- src/mainboard/google/rambi/gpio.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'src/mainboard/google/rambi') diff --git a/src/mainboard/google/rambi/gpio.c b/src/mainboard/google/rambi/gpio.c index 76002cfd43..68a5970345 100644 --- a/src/mainboard/google/rambi/gpio.c +++ b/src/mainboard/google/rambi/gpio.c @@ -63,7 +63,7 @@ static const struct soc_gpio_map gpscore_gpio_map[] = { GPIO_FUNC1, /* S0-SC004 - PCIE_CLKREQ_WLAN# */ GPIO_NC, /* S0-SC005 - PCIE_CLKREQ_LAN# (NC) */ GPIO_NC, /* S0-SC006 - PCIE_CLKREQ3# (NC) */ - GPIO_NC, /* S0-SC007 - SD3_WP (NC) */ + GPIO_FUNC(2, PULL_DISABLE, 10K), /* S0-SC007 - SD3_WP external pull */ GPIO_NC, /* S0-SC008 - ACZ_RST# (NC) */ GPIO_NC, /* S0-SC009 - ACZ_SYNC (NC) */ GPIO_NC, /* S0-SC010 - ACZ_BCLK (NC) */ @@ -89,15 +89,15 @@ static const struct soc_gpio_map gpscore_gpio_map[] = { GPIO_NC, /* S0-SC030 - NC */ GPIO_NC, /* S0-SC031 - NC */ GPIO_NC, /* S0-SC032 - NC */ - GPIO_NC, /* S0-SC033 - SD3_CLK (NC) */ - GPIO_NC, /* S0-SC034 - SD3_D0 (NC) */ - GPIO_NC, /* S0-SC035 - SD3_D1 (NC) */ - GPIO_NC, /* S0-SC036 - SD3_D2 (NC) */ - GPIO_NC, /* S0-SC037 - SD3_D3 (NC) */ - GPIO_NC, /* S0-SC038 - SD3_CD# (NC) */ - GPIO_NC, /* S0-SC039 - SD3_CMD (NC) */ - GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN (NC) */ - GPIO_NC, /* S0-SC041 - SDIO3_PWR_EN# (NC)*/ + GPIO_FUNC(1, PULL_DOWN, 2K), /* S0-SC033 - SD3_CLK */ + GPIO_FUNC(1, PULL_UP, 2K), /* S0-SC034 - SD3_D0 */ + GPIO_FUNC(1, PULL_UP, 2K), /* S0-SC035 - SD3_D1 */ + GPIO_FUNC(1, PULL_UP, 2K), /* S0-SC036 - SD3_D2 */ + GPIO_FUNC(1, PULL_UP, 2K), /* S0-SC037 - SD3_D3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC038 - SD3_CD# */ + GPIO_FUNC(1, PULL_UP, 2K), /* S0-SC039 - SD3_CMD */ + GPIO_NC, /* S0-SC040 - SDMMC3_1P8_EN - TP3 */ + GPIO_FUNC(1, PULL_UP, 20K), /* S0-SC041 - SDIO3_PWR_EN# */ GPIO_FUNC1, /* S0-SC042 - LPC_LAD0 */ GPIO_FUNC1, /* S0-SC043 - LPC-LAD1 */ GPIO_FUNC1, /* S0-SC044 - LPC_LAD2 */ -- cgit v1.2.3