From c34bb3807c9318742d7a1224a38bf03fda0c1723 Mon Sep 17 00:00:00 2001 From: Venkata Krishna Nimmagadda Date: Wed, 15 Jan 2020 10:13:26 -0800 Subject: mb/google/volteer: Enable pcie rp11 for optane Optane memory module shows up as 2 NVMe devices in x2 config - NVMe storage device and NVMe Optane memory. Storage device uses rp9 and optane memory uses rp11. This patch enables rp11. Please note that these two share clk related pins. Configuring pciecontroller3 to be set from 2x2. This will by done by auto detecting optane memory: enabling HybridStorageMode. BUG=b:148604250 BRANCH=chromeos TEST='Build, boot and look for two NVMe devices with lspci on Volteer' Cq-Depend: chrome-internal:2501837 Signed-off-by: Venkata Krishna Nimmagadda Change-Id: I5430829b496ed275e2e3bda3c0bf21c3d2132628 Reviewed-on: https://chrome-internal-review.googlesource.com/c/chromeos/third_party/coreboot-intel-private/jsl-tgl/+/2424428 Tested-by: Wonkyu Kim Reviewed-by: Nick Vaccaro Reviewed-by: Wonkyu Kim Reviewed-on: https://review.coreboot.org/c/coreboot/+/39420 Reviewed-by: Wonkyu Kim Reviewed-by: Caveh Jalali Tested-by: build bot (Jenkins) --- src/mainboard/google/volteer/variants/baseboard/devicetree.cb | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'src/mainboard/google/volteer') diff --git a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb index b08ff7d5c9..a65e5f1be8 100644 --- a/src/mainboard/google/volteer/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/volteer/variants/baseboard/devicetree.cb @@ -46,6 +46,10 @@ chip soc/intel/tigerlake register "PcieClkSrcUsage[0]" = "8" register "PcieClkSrcClkReq[0]" = "0" + # Enable Optane PCIE 11 using clk 0 + register "PcieRpEnable[10]" = "1" + register "HybridStorageMode" = "1" + # Enable SD Card PCIE 8 using clk 3 register "PcieRpEnable[7]" = "1" register "PcieClkSrcUsage[3]" = "7" @@ -311,7 +315,7 @@ chip soc/intel/tigerlake device pci 1d.0 on end # RP9 0xA0B0 device pci 1d.1 off end # RP10 0xA0B1 - device pci 1d.2 off end # RP11 0xA0B2 + device pci 1d.2 on end # RP11 0xA0B2 device pci 1d.3 off end # RP12 0xA0B3 device pci 1d.4 off end # RP13 0xA0B4 device pci 1d.5 off end # RP14 0xA0B5 -- cgit v1.2.3