From ac16650e0cad71905678bf9aecc2f78dd7da228d Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Tue, 21 Jul 2020 21:48:27 -0700 Subject: mb/google/zork: Remove unnecessary PULL_UP from early_gpio_table This change drops PULL_UP configured on pads in early_gpio table since these pads have external pulls. BUG=b:154351731 Change-Id: Id270e7b4f83dfa942655f513776a3b1c15c9678d Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/c/coreboot/+/43696 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held Reviewed-by: Aaron Durbin --- .../google/zork/variants/baseboard/gpio_baseboard_common.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'src/mainboard/google/zork') diff --git a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_common.c b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_common.c index a4e86487bd..0b658a4129 100644 --- a/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_common.c +++ b/src/mainboard/google/zork/variants/baseboard/gpio_baseboard_common.c @@ -8,17 +8,17 @@ static const struct soc_amd_gpio early_gpio_table[] = { /* H1_FCH_INT_ODL */ - PAD_INT(GPIO_3, PULL_UP, EDGE_LOW, STATUS), + PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS), /* I2C3_SCL - H1 */ - PAD_NF(GPIO_19, I2C3_SCL, PULL_UP), + PAD_NF(GPIO_19, I2C3_SCL, PULL_NONE), /* I2C3_SDA - H1 */ - PAD_NF(GPIO_20, I2C3_SDA, PULL_UP), + PAD_NF(GPIO_20, I2C3_SDA, PULL_NONE), /* PCIE_RST0_L - Fixed timings */ PAD_NF(GPIO_26, PCIE_RST_L, PULL_NONE), /* FCH_ESPI_EC_CS_L */ PAD_NF(GPIO_30, ESPI_CS_L, PULL_NONE), - /* ESPI_ALERT_L (may be unused) */ - PAD_NF(GPIO_108, ESPI_ALERT_L, PULL_UP), + /* ESPI_ALERT_L */ + PAD_NF(GPIO_108, ESPI_ALERT_L, PULL_NONE), /* UART0_RXD - DEBUG */ PAD_NF(GPIO_136, UART0_RXD, PULL_NONE), /* UART0_TXD - DEBUG */ -- cgit v1.2.3