From 15a66a10b53c257b549f6c9efe6355e39556a8c5 Mon Sep 17 00:00:00 2001 From: David Hendricks Date: Mon, 4 Feb 2013 20:42:12 -0800 Subject: snow: use bootblock build class for UART code This gets rid of a bunch of copy + pasted code from Exynos UART files. Change-Id: I9fbb6d79a40a338c9fdecd495544ff207909fd37 Signed-off-by: David Hendricks Reviewed-on: http://review.coreboot.org/2286 Reviewed-by: Stefan Reinauer Tested-by: build bot (Jenkins) --- src/mainboard/google/snow/bootblock.c | 127 ++-------------------------------- 1 file changed, 5 insertions(+), 122 deletions(-) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/snow/bootblock.c b/src/mainboard/google/snow/bootblock.c index 58d347d5a6..2855ddbc27 100644 --- a/src/mainboard/google/snow/bootblock.c +++ b/src/mainboard/google/snow/bootblock.c @@ -32,10 +32,10 @@ #include "cpu/samsung/s5p-common/gpio.h" #include "cpu/samsung/s5p-common/s3c24x0_i2c.h" #include "cpu/samsung/exynos5-common/spi.h" -#include "cpu/samsung/exynos5-common/uart.h" #include #include +#include #include #include @@ -124,125 +124,8 @@ void gpio_set_pull(int gpio, int mode) writel(value, &bank->pull); } -static uint32_t uart3_base = CONFIG_CONSOLE_SERIAL_UART_ADDRESS; - #define CONFIG_SYS_CLK_FREQ 24000000 -static void serial_setbrg_dev(void) -{ -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - struct s5p_uart *uart = (struct s5p_uart *)uart3_base; - u32 uclk; - u32 baudrate = CONFIG_TTYS0_BAUD; - u32 val; -// enum periph_id periph; - -// periph = exynos5_get_periph_id(base_port); - uclk = clock_get_periph_rate(PERIPH_ID_UART3); - val = uclk / baudrate; - - writel(val / 16 - 1, &uart->ubrdiv); - - /* - * FIXME(dhendrix): the original uart.h had a "br_rest" value which - * does not seem relevant to the exynos5250... not entirely sure - * where/if we need to worry about it here - */ -#if 0 - if (s5p_uart_divslot()) - writew(udivslot[val % 16], &uart->rest.slot); - else - writeb(val % 16, &uart->rest.value); -#endif -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static void exynos5_init_dev(void) -{ -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - struct s5p_uart *uart = (struct s5p_uart *)uart3_base; - - /* enable FIFOs */ - writel(0x1, &uart->ufcon); - writel(0, &uart->umcon); - /* 8N1 */ - writel(0x3, &uart->ulcon); - /* No interrupts, no DMA, pure polling */ - writel(0x245, &uart->ucon); - - serial_setbrg_dev(); -} - -static int exynos5_uart_err_check(int op) -{ - //struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - struct s5p_uart *uart = (struct s5p_uart *)uart3_base; - unsigned int mask; - - /* - * UERSTAT - * Break Detect [3] - * Frame Err [2] : receive operation - * Parity Err [1] : receive operation - * Overrun Err [0] : receive operation - */ - if (op) - mask = 0x8; - else - mask = 0xf; - - return readl(&uart->uerstat) & mask; -} - -#define RX_FIFO_COUNT_MASK 0xff -#define RX_FIFO_FULL_MASK (1 << 8) -#define TX_FIFO_FULL_MASK (1 << 24) - -#if 0 -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static unsigned char exynos5_uart_rx_byte(void) -{ -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - struct s5p_uart *uart = (struct s5p_uart *)uart3_base; - - /* wait for character to arrive */ - while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | - RX_FIFO_FULL_MASK))) { - if (exynos5_uart_err_check(0)) - return 0; - } - - return readb(&uart->urxh) & 0xff; -} -#endif - -/* - * Output a single byte to the serial port. - */ -static void exynos5_uart_tx_byte(unsigned char data) -{ -// struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - struct s5p_uart *uart = (struct s5p_uart *)uart3_base; - - if (data == '\n') - exynos5_uart_tx_byte('\r'); - - /* wait for room in the tx FIFO */ - while ((readl(uart->ufstat) & TX_FIFO_FULL_MASK)) { - if (exynos5_uart_err_check(1)) - return; - } - - writeb(data, &uart->utxh); -} - void puts(const char *s); void puts(const char *s) { @@ -250,10 +133,10 @@ void puts(const char *s) while (*s) { if (*s == '\n') { - exynos5_uart_tx_byte(0xd); /* CR */ + uart_tx_byte(0xd); /* CR */ } - exynos5_uart_tx_byte(*s++); + uart_tx_byte(*s++); n++; } } @@ -264,7 +147,7 @@ static void do_serial(void) gpio_set_pull(GPIO_A14, EXYNOS_GPIO_PULL_NONE); gpio_cfg_pin(GPIO_A15, EXYNOS_GPIO_FUNC(0x2)); - exynos5_init_dev(); + uart_init(); } #define I2C_WRITE 0 @@ -1616,7 +1499,7 @@ int do_printk(int msg_level, const char *fmt, ...) int i; va_start(args, fmt); - i = vtxprintf(exynos5_uart_tx_byte, fmt, args); + i = vtxprintf(uart_tx_byte, fmt, args); va_end(args); return i; -- cgit v1.2.3