From c5f354b97bb6ddff736c12626b5399da5a5faafc Mon Sep 17 00:00:00 2001 From: Shamile Khan Date: Thu, 22 Feb 2018 13:45:39 -0800 Subject: mb/google/octopus: Add device tree settings Change-Id: Id45409a9561671237410dd2f8f0bbfe61ff33562 Signed-off-by: Shamile Khan Reviewed-on: https://review.coreboot.org/23846 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh --- .../octopus/variants/baseboard/devicetree.cb | 162 +++++++++++++++++++++ 1 file changed, 162 insertions(+) (limited to 'src/mainboard/google') diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb index 64e07c303e..9d267cf445 100644 --- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb @@ -2,4 +2,166 @@ chip soc/intel/apollolake device cpu_cluster 0 on device lapic 0 on end end + + # EMMC TX DATA Delay 1 + # Refer to EDS-Vol2-16.33. + # [14:8] steps of delay for HS400, each 125ps. + # [6:0] steps of delay for SDR104/HS200, each 125ps. + register "emmc_tx_data_cntl1" = "0x0C3A" + + # EMMC TX DATA Delay 2 + # Refer to EDS-Vol2-16.34. + # [30:24] steps of delay for SDR50, each 125ps. + # [22:16] steps of delay for DDR50, each 125ps. + # [14:8] steps of delay for SDR25/HS50, each 125ps. + # [6:0] steps of delay for SDR12, each 125ps. + register "emmc_tx_data_cntl2" = "0x28272929" + + # EMMC RX CMD/DATA Delay 1 + # Refer to EDS-Vol2-16.35. + # [30:24] steps of delay for SDR50, each 125ps. + # [22:16] steps of delay for DDR50, each 125ps. + # [14:8] steps of delay for SDR25/HS50, each 125ps. + # [6:0] steps of delay for SDR12, each 125ps. + register "emmc_rx_cmd_data_cntl1" = "0x003B263B" + + # EMMC RX CMD/DATA Delay 2 + # Refer to EDS-Vol2-16.37. + # [17:16] stands for Rx Clock before Output Buffer + # [14:8] steps of delay for Auto Tuning Mode, each 125ps. + # [6:0] steps of delay for HS200, each 125ps. + register "emmc_rx_cmd_data_cntl2" = "0x10008" + + # EMMC RX STROBE Delay + # Refer to EDS-Vol2-16.36. + # [16] Enable Auto Tuning for HS400 Strobe Path + # [14:8] steps of delay for HS400 Mode 1, each 125ps. + # [6:0] steps of delay for HS400 Mode 2, each 125ps. + register "emmc_rx_strobe_cntl" = "0x0a0a" + + # EMMC TX COMMAND Delay + # Refer to EDS-Vol2-16.32. + # [14:8] steps of delay for DDR Mode, each 125ps. + # [6:0] steps of delay for SDR Mode, each 125ps. + register "emmc_tx_cmd_cntl" = "0x1305" + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route, i.e., if this route changes then the affected GPE + # offset bits also need to be changed. This sets the PMC register + # GPE_CFG fields. + register "gpe0_dw1" = "PMC_GPE_NW_63_32" + register "gpe0_dw2" = "PMC_GPE_N_95_64" + register "gpe0_dw3" = "PMC_GPE_NW_31_0" + + # Minimum SLP S3 assertion width 28ms. + register "slp_s3_assertion_width_usecs" = "28000" + + # Enable lpss s0ix + register "lpss_s0ix_enable" = "1" + + # digitizer at 400kHz + register "i2c[0]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }" + + # trackpad at 400kHz + register "i2c[6]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + .data_hold_time_ns = 350, + }" + + # touchscreen at 400kHz + register "i2c[7]" = "{ + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }" + + device domain 0 on + device pci 00.0 on end # - Host Bridge + device pci 00.1 on end # - DPTF + device pci 00.2 on end # - NPK + device pci 02.0 on end # - Gen + device pci 03.0 on end # - Iunit + device pci 0c.0 on end # - CNVi + device pci 0d.0 on end # - P2SB + device pci 0d.1 on end # - PMC + device pci 0d.2 on end # - Fast SPI + device pci 0d.3 on end # - Shared SRAM + device pci 0e.0 on end # - Audio + device pci 0f.0 on end # - Heci1 + device pci 0f.1 on end # - Heci2 + device pci 0f.2 on end # - Heci3 + device pci 11.0 off end # - ISH + device pci 12.0 off end # - SATA + device pci 13.0 on end # - PCIe-A 0 Onboard M2 Slot(Wifi) + device pci 13.1 off end # - PCIe-A 1 + device pci 13.2 off end # - PCIe-A 2 + device pci 13.3 off end # - PCIe-A 3 + device pci 14.0 off end # - PCIe-B 0 + device pci 14.1 off end # - PCIe-B 1 + device pci 15.0 on end # - XHCI + device pci 15.1 off end # - XDCI + device pci 16.0 on + chip drivers/i2c/hid + register "generic.hid" = ""WCOM50C1"" + register "generic.desc" = ""WCOM Digitizer"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_139_IRQ)" + register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_140)" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x1" + device i2c 0x9 on end + end + end # - I2C 0 + device pci 16.1 on end # - I2C 1 + device pci 16.2 on end # - I2C 2 + device pci 16.3 on end # - I2C 3 + device pci 17.0 off end # - I2C 4 + device pci 17.1 on end # - I2C 5 + device pci 17.2 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_135_IRQ)" + register "wake" = "GPE0_DW2_02" + register "probed" = "1" + device i2c 15 on end + end + end # - I2C 6 + device pci 17.3 on + chip drivers/i2c/generic + register "hid" = ""ELAN0001"" + register "desc" = ""ELAN Touchscreen"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_212_IRQ)" + register "probed" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_105)" + register "reset_delay_ms" = "20" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_213)" + register "enable_delay_ms" = "1" + register "has_power_resource" = "1" + device i2c 10 on end + end + end # - I2C 7 + device pci 18.0 on end # - UART 0 + device pci 18.1 off end # - UART 1 + device pci 18.2 on end # - UART 2 + device pci 18.3 off end # - UART 3 + device pci 19.0 on end # - SPI 0 + device pci 19.1 off end # - SPI 1 + device pci 19.2 on end # - SPI 2 + device pci 1a.0 on end # - PWM + device pci 1c.0 on end # - eMMC + device pci 1e.0 off end # - SDIO + device pci 1f.0 on + chip ec/google/chromeec + device pnp 0c09.0 on end + end + end # - ESPI + device pci 1f.1 on end # - SMBUS + end end -- cgit v1.2.3