From d8fcd42089f109fffeb6cdcf1745013b91d7513e Mon Sep 17 00:00:00 2001 From: Angel Pons Date: Sun, 6 Dec 2020 23:55:08 +0100 Subject: mb/hp/280_g2: Add new mainboard MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is a µATX mainboard with a LGA1151 socket and two DDR4 DIMM slots. There are two possible BOM configurations: Sid has no legacy devices, whereas Manny provides two serial ports, a parallel port, a PCI slot and PS/2 keyboard/mouse connectors. These boards also have different Super I/O models: Manny uses an ITE IT8625E, whereas legacy-free Sid comes with an ITE IT8656E instead. This coreboot port has been done using a Sid board, thus support for Manny-specific features is missing. Booting should still be possible, though: none of these legacy features is essential. The board has an unpopulated 6-pin header, wired to PCH UART 2. This can be used to retrieve coreboot logs. Working: - Both DIMM slots (Micron CT4G4DFS8213.8FA11, Hynix HMA851U6AFR6N-UH) - PCH SerialIO UART 2 to get coreboot logs - Rear USB ports - Realtek RTL8111 GbE NIC - Integrated graphics on DVI with libgfxinit - At least one SATA port - Flashing internally with flashrom - S3 suspend/resume - VBT - SeaBIOS 1.14 to boot Arch Linux (kernel linux-5.10.15.arch1-1) Untested: - Audio - VGA: DP2VGA chip uses DDI E, and libgfxinit doesn't support DDI E yet - Front USB headers - Non-Linux OSes - PCI slot - IT8625E peripherals: serial, parallel and PS/2 ports Change-Id: Iadf11c187307a24b15039a5a716737d9d74944e6 Signed-off-by: Angel Pons Reviewed-on: https://review.coreboot.org/c/coreboot/+/48386 Reviewed-by: Paul Menzel Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) --- src/mainboard/hp/280_g2/Kconfig | 42 +++++++++ src/mainboard/hp/280_g2/Kconfig.name | 2 + src/mainboard/hp/280_g2/Makefile.inc | 7 ++ src/mainboard/hp/280_g2/acpi/ec.asl | 0 src/mainboard/hp/280_g2/acpi/superio.asl | 0 src/mainboard/hp/280_g2/board_info.txt | 8 ++ src/mainboard/hp/280_g2/bootblock.c | 103 +++++++++++++++++++++ src/mainboard/hp/280_g2/data.vbt | Bin 0 -> 6144 bytes src/mainboard/hp/280_g2/devicetree.cb | 144 ++++++++++++++++++++++++++++++ src/mainboard/hp/280_g2/dsdt.asl | 26 ++++++ src/mainboard/hp/280_g2/gma-mainboard.ads | 16 ++++ src/mainboard/hp/280_g2/hda_verb.c | 25 ++++++ src/mainboard/hp/280_g2/romstage.c | 52 +++++++++++ 13 files changed, 425 insertions(+) create mode 100644 src/mainboard/hp/280_g2/Kconfig create mode 100644 src/mainboard/hp/280_g2/Kconfig.name create mode 100644 src/mainboard/hp/280_g2/Makefile.inc create mode 100644 src/mainboard/hp/280_g2/acpi/ec.asl create mode 100644 src/mainboard/hp/280_g2/acpi/superio.asl create mode 100644 src/mainboard/hp/280_g2/board_info.txt create mode 100644 src/mainboard/hp/280_g2/bootblock.c create mode 100644 src/mainboard/hp/280_g2/data.vbt create mode 100644 src/mainboard/hp/280_g2/devicetree.cb create mode 100644 src/mainboard/hp/280_g2/dsdt.asl create mode 100644 src/mainboard/hp/280_g2/gma-mainboard.ads create mode 100644 src/mainboard/hp/280_g2/hda_verb.c create mode 100644 src/mainboard/hp/280_g2/romstage.c (limited to 'src/mainboard/hp') diff --git a/src/mainboard/hp/280_g2/Kconfig b/src/mainboard/hp/280_g2/Kconfig new file mode 100644 index 0000000000..10f6828ca7 --- /dev/null +++ b/src/mainboard/hp/280_g2/Kconfig @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only + +if BOARD_HP_280_G2 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_8192 + select HAVE_ACPI_RESUME + select HAVE_ACPI_TABLES + select INTEL_GMA_HAVE_VBT + select INTEL_LPSS_UART_FOR_CONSOLE + select MAINBOARD_HAS_LIBGFXINIT + select SKYLAKE_SOC_PCH_H + select SOC_INTEL_COMMON_BLOCK_HDA_VERB + select SOC_INTEL_KABYLAKE + select SPD_READ_BY_WORD + select SUPERIO_ITE_COMMON_PRE_RAM + +config MAINBOARD_DIR + string + default "hp/280_g2" + +config MAINBOARD_PART_NUMBER + string + default "280 G2" + +config DIMM_MAX + int + default 2 + +config DIMM_SPD_SIZE + int + default 512 + +config UART_FOR_CONSOLE + int + default 2 + +config USE_LEGACY_8254_TIMER + default y + +endif diff --git a/src/mainboard/hp/280_g2/Kconfig.name b/src/mainboard/hp/280_g2/Kconfig.name new file mode 100644 index 0000000000..74ddaf4fd3 --- /dev/null +++ b/src/mainboard/hp/280_g2/Kconfig.name @@ -0,0 +1,2 @@ +config BOARD_HP_280_G2 + bool "280 G2" diff --git a/src/mainboard/hp/280_g2/Makefile.inc b/src/mainboard/hp/280_g2/Makefile.inc new file mode 100644 index 0000000000..3c2a7c49e3 --- /dev/null +++ b/src/mainboard/hp/280_g2/Makefile.inc @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += bootblock.c + +ramstage-y += hda_verb.c + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads diff --git a/src/mainboard/hp/280_g2/acpi/ec.asl b/src/mainboard/hp/280_g2/acpi/ec.asl new file mode 100644 index 0000000000..e69de29bb2 diff --git a/src/mainboard/hp/280_g2/acpi/superio.asl b/src/mainboard/hp/280_g2/acpi/superio.asl new file mode 100644 index 0000000000..e69de29bb2 diff --git a/src/mainboard/hp/280_g2/board_info.txt b/src/mainboard/hp/280_g2/board_info.txt new file mode 100644 index 0000000000..b0e71e53a0 --- /dev/null +++ b/src/mainboard/hp/280_g2/board_info.txt @@ -0,0 +1,8 @@ +Vendor name: HP +Board name: 280 G2 +Category: desktop +Board URL: https://support.hp.com/us-en/document/c04955444 +ROM package: SOIC-8 +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/hp/280_g2/bootblock.c b/src/mainboard/hp/280_g2/bootblock.c new file mode 100644 index 0000000000..f42c3f26f7 --- /dev/null +++ b/src/mainboard/hp/280_g2/bootblock.c @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include +#include + +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPP_B14, DN_20K, PLTRST, NF1), /* SPKR */ + PAD_CFG_NF(GPP_C20, UP_20K, PLTRST, NF1), /* PCH_UART2_RXD */ + PAD_CFG_NF(GPP_C21, UP_20K, PLTRST, NF1), /* PCH_UART2_TXD */ + PAD_NC(GPP_C22, NONE), + PAD_CFG_GPI(GPP_C23, NONE, PLTRST), /* TODO: SIO PME# */ + PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), /* SATA_LED# */ + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), /* USB_OC_LAN# */ + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), /* USB3.0_OC_BACK# */ + PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), /* USB_OC_REAR2# */ + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), /* USB_OC_FRONT1# */ + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), /* USB_OC_FRONT2# */ + PAD_CFG_GPI(GPP_G1, NONE, PLTRST), /* LPT_DET# */ + PAD_CFG_GPO(GPP_G2, 0, PLTRST), /* AUD_AMP_ON# */ + PAD_CFG_GPO(GPP_G3, 0, PLTRST), /* W_DISABLE2# */ + PAD_CFG_GPI(GPP_G4, NONE, PLTRST), /* CLR_CMOS# */ + PAD_CFG_GPI(GPP_G5, NONE, PLTRST), /* CLR_PSWD# */ + PAD_CFG_GPI(GPP_G6, NONE, PLTRST), /* BOOT_BLOCK_EN# */ + PAD_CFG_GPI(GPP_G9, NONE, PLTRST), /* HOOD_SW_DET# */ + PAD_CFG_GPI(GPP_G12, NONE, PLTRST), /* FRONT_USB_DET1# */ + PAD_CFG_GPI(GPP_G13, NONE, PLTRST), /* FRONT_USB_DET2# */ + PAD_CFG_GPI(GPP_G14, NONE, PLTRST), /* FRONT_USB_DET3# */ + PAD_CFG_GPI(GPP_G16, NONE, PLTRST), /* F_AUDIO_DET# */ + PAD_CFG_GPI(GPP_G17, NONE, PLTRST), /* COMM_B_DET# */ + PAD_CFG_GPI_SCI(GPP_G21, NONE, DEEP, EDGE_SINGLE, INVERT), /* SPI_TPM_PIRQ# */ + PAD_CFG_GPI(GPP_H10, NONE, PLTRST), /* S_GPI_SKU0 */ + PAD_CFG_GPI(GPP_H15, NONE, PLTRST), /* BRD_REV0 */ + PAD_CFG_GPI(GPP_H16, NONE, PLTRST), /* BRD_REV1 */ + PAD_CFG_GPI(GPP_H17, NONE, PLTRST), /* BRD_REV2 */ + PAD_CFG_GPI(GPP_H18, NONE, PLTRST), /* S_GPI_SKU1 */ + PAD_CFG_NF(GPP_I2, NONE, PLTRST, NF1), /* DPD_HPD_R */ + PAD_CFG_NF(GPP_I3, NONE, PLTRST, NF1), /* DPE_HPD_R */ + PAD_CFG_NF(GPP_I9, NONE, PLTRST, NF1), /* DDPD_CTRLCLK */ + PAD_CFG_NF(GPP_I10, DN_20K, PLTRST, NF1), /* DDPD_CTRLDATA */ +}; + +static void mainboard_configure_super_io(void) +{ + const pnp_devfn_t dev = PNP_DEV(0x2e, 7); + + pnp_enter_conf_state(dev); + pnp_set_logical_device(dev); + + pnp_write_config(dev, 0x23, 0x59); + pnp_write_config(dev, 0x25, 0x10); + pnp_write_config(dev, 0x26, 0x04); + pnp_write_config(dev, 0x28, 0x08); + pnp_write_config(dev, 0x2a, 0x81); + pnp_write_config(dev, 0x71, 0x08); + pnp_write_config(dev, 0xc0, 0x00); + pnp_write_config(dev, 0xc1, 0x04); + pnp_write_config(dev, 0xc8, 0x00); + pnp_write_config(dev, 0xc9, 0x04); + pnp_write_config(dev, 0xcb, 0x08); + pnp_write_config(dev, 0xd5, 0x07); + pnp_write_config(dev, 0xf8, 0x12); + pnp_write_config(dev, 0xf9, 0x01); + + pnp_exit_conf_state(dev); +} + +void bootblock_mainboard_early_init(void) +{ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); + + mainboard_configure_super_io(); +} + +void bootblock_mainboard_init(void) +{ + const gpio_t rev_gpios[] = { + GPP_H15, + GPP_H16, + GPP_H17, + }; + + const char *const rev_table[8] = { + [0] = "DB", + [1] = "Pre-SI", + [2] = "SI", + [3] = "PV", + [4] = "1.00 (SMVB)", + [5] = "1.10 (ECN1)", + [6] = "1.20 (ECN1)", + [7] = "1.30 (ECN1)", + }; + + const char *const brd_str = gpio_get(GPP_H10) ? "Sid" : "Manny"; + + const uint32_t brd_rev = gpio_base2_value(rev_gpios, ARRAY_SIZE(rev_gpios)); + + printk(BIOS_DEBUG, "Mainboard: %s rev %s\n", brd_str, rev_table[brd_rev]); +} diff --git a/src/mainboard/hp/280_g2/data.vbt b/src/mainboard/hp/280_g2/data.vbt new file mode 100644 index 0000000000..d444f0932e Binary files /dev/null and b/src/mainboard/hp/280_g2/data.vbt differ diff --git a/src/mainboard/hp/280_g2/devicetree.cb b/src/mainboard/hp/280_g2/devicetree.cb new file mode 100644 index 0000000000..8784080f95 --- /dev/null +++ b/src/mainboard/hp/280_g2/devicetree.cb @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/intel/skylake + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexUart2] = PchSerialIoSkipInit, /* Routed to debug header */ + }" + + register "eist_enable" = "1" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + subsystemid 0x103c 0x2b5e inherit + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PCIe graphics + device pci 02.0 on end # iGPU + device pci 04.0 on end # CPU Thermal + device pci 08.0 on end # GMM + device pci 14.0 on # xHCI + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[2]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[3]" = "USB2_PORT_MID(OC4)" + register "usb2_ports[4]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[5]" = "USB2_PORT_MID(OC2)" + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[8]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[9]" = "USB2_PORT_MID(OC0)" + register "usb2_ports[10]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[11]" = "USB2_PORT_MID(OC1)" + register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)" + register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)" + register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)" + register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" + end + device pci 14.1 off end # USB OTG + device pci 14.2 on end # PCH Thermal + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # MEI #1 + device pci 16.1 off end # MEI #2 + device pci 16.2 off end # ME IDE-R + device pci 16.3 off end # ME KT + device pci 16.4 off end # MEI #3 + device pci 17.0 on # SATA + register "SataMode" = "SATA_AHCI" + register "SataSalpSupport" = "1" + register "SataPortsEnable" = "{ + [0] = 1, + [1] = 1, + [2] = 1, + [3] = 1, + }" + register "SataPortsHotPlug" = "{ + [0] = 1, + [1] = 1, + [2] = 1, + [3] = 1, + }" + # DevSlp not supported + + # Enable test mode for SATA margining + register "SataTestMode" = "1" + end + device pci 19.0 on end # UART #2 + device pci 1c.0 off end # RP #1 + device pci 1c.1 off end # RP #2 + device pci 1c.2 off end # RP #3 + device pci 1c.3 off end # RP #4 + device pci 1c.4 on # RP #5: IT8893E PCI Bridge + register "PcieRpEnable[4]" = "1" + register "PcieRpLtrEnable[4]" = "1" + register "PcieRpAdvancedErrorReporting[4]" = "1" + register "PcieRpClkSrcNumber[4]" = "11" + end + device pci 1c.5 on # RP #6: PCIe x1 slot + register "PcieRpEnable[5]" = "1" + register "PcieRpHotPlug[5]" = "1" + register "PcieRpLtrEnable[5]" = "1" + register "PcieRpAdvancedErrorReporting[5]" = "1" + register "PcieRpClkSrcNumber[5]" = "6" + end + device pci 1c.6 on # RP #7: RTL8111 GbE NIC + register "PcieRpEnable[6]" = "1" + register "PcieRpLtrEnable[6]" = "1" + register "PcieRpAdvancedErrorReporting[6]" = "1" + register "PcieRpClkSrcNumber[6]" = "10" + end + device pci 1c.7 on # RP #8: M.2 2230 slot + register "PcieRpEnable[7]" = "1" + register "PcieRpHotPlug[7]" = "1" + register "PcieRpLtrEnable[7]" = "1" + register "PcieRpAdvancedErrorReporting[7]" = "1" + register "PcieRpClkSrcNumber[7]" = "12" + end + device pci 1d.0 off end # RP #9 + device pci 1d.1 off end # RP #10 + device pci 1d.2 off end # RP #11 + device pci 1d.3 off end # RP #12 + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1f.0 on # LPC bridge + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + # FIXME: Missing Super I/O HWM config + register "gen1_dec" = "0x000c0291" + end + device pci 1f.1 on end # P2SB + device pci 1f.2 on # PMC + register "PmConfigSlpS3MinAssert" = "SLP_S3_MIN_ASSERT_50MS" + register "PmConfigSlpS4MinAssert" = "SLP_S4_MIN_ASSERT_4S" + register "PmConfigSlpSusMinAssert" = "SLP_SUS_MIN_ASSERT_4S" + register "PmConfigSlpAMinAssert" = "SLP_A_MIN_ASSERT_2S" + register "PmConfigPwrCycDur" = "RESET_POWER_CYCLE_4S" + end + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # SPI + device pci 1f.6 off end # Intel GbE + device pci 1f.7 on # Trace Hub + register "TraceHubMemReg0Size" = "2" + register "TraceHubMemReg1Size" = "2" + end + end +end diff --git a/src/mainboard/hp/280_g2/dsdt.asl b/src/mainboard/hp/280_g2/dsdt.asl new file mode 100644 index 0000000000..26ebbe071f --- /dev/null +++ b/src/mainboard/hp/280_g2/dsdt.asl @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +DefinitionBlock( + "dsdt.aml", + "DSDT", + ACPI_DSDT_REV_2, + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 +) +{ + #include + + #include + #include + #include + + Device (\_SB.PCI0) { + #include + #include + } + + #include +} diff --git a/src/mainboard/hp/280_g2/gma-mainboard.ads b/src/mainboard/hp/280_g2/gma-mainboard.ads new file mode 100644 index 0000000000..735fe2684c --- /dev/null +++ b/src/mainboard/hp/280_g2/gma-mainboard.ads @@ -0,0 +1,16 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (HDMI3, -- DVI-I + eDP, -- VGA + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/hp/280_g2/hda_verb.c b/src/mainboard/hp/280_g2/hda_verb.c new file mode 100644 index 0000000000..3ed214fc04 --- /dev/null +++ b/src/mainboard/hp/280_g2/hda_verb.c @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + /* coreboot specific header */ + 0x10ec0221, /* Codec Vendor / Device ID: Realtek ALC221 */ + 0x103c2b5e, /* Subsystem ID */ + 11, /* Number of jacks */ + AZALIA_SUBVENDOR(0, 0x103c2b5e), + AZALIA_PIN_CFG(0, 0x12, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x01014010), + AZALIA_PIN_CFG(0, 0x17, 0x90170120), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x01813030), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x4044c301), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + AZALIA_PIN_CFG(0, 0x21, 0x0221101f), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/hp/280_g2/romstage.c b/src/mainboard/hp/280_g2/romstage.c new file mode 100644 index 0000000000..8f32d2495a --- /dev/null +++ b/src/mainboard/hp/280_g2/romstage.c @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include + +/* Rcomp resistors are located on the CPU package */ +static const u16 rcomp_resistors[3] = { 121, 75, 100 }; + +/* Rcomp targets for RdOdt, WrDS, WrDSCmd, WrDSCtl, WrDSClk */ +static const u16 rcomp_targets[5] = { 50, 26, 20, 20, 26 }; + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *const mem_cfg = &mupd->FspmConfig; + + struct spd_block blk = { + .addr_map = { 0x51, 0x50 }, + }; + + get_spd_smbus(&blk); + + mem_cfg->DqPinsInterleaved = true; + + mem_cfg->UserBd = BOARD_TYPE_DESKTOP; + + mem_cfg->MemorySpdDataLen = blk.len; + mem_cfg->MemorySpdPtr00 = (u32)blk.spd_array[0]; + mem_cfg->MemorySpdPtr10 = (u32)blk.spd_array[1]; + + assert(sizeof(mem_cfg->RcompResistor) == sizeof(rcomp_resistors)); + assert(sizeof(mem_cfg->RcompTarget) == sizeof(rcomp_targets)); + + memcpy(mem_cfg->RcompResistor, rcomp_resistors, sizeof(mem_cfg->RcompResistor)); + memcpy(mem_cfg->RcompTarget, rcomp_targets, sizeof(mem_cfg->RcompTarget)); + + /* These settings are most likely useless if using a release build of FSP */ + mem_cfg->PcdDebugInterfaceFlags = 2; /* Enable UART */ + mem_cfg->PcdSerialIoUartNumber = 2; /* Use UART #2 */ + mem_cfg->PcdSerialDebugBaudRate = 7; /* 115200 baud */ + mem_cfg->PcdSerialDebugLevel = 3; /* Log <= Info */ + + /* Trace Hub */ + mem_cfg->PcdDebugInterfaceFlags |= 1 << 5; + + /* Allow changing memory timings after MRC is done */ + mem_cfg->RealtimeMemoryTiming = 1; + mem_cfg->SaOcSupport = 1; +} -- cgit v1.2.3