From e6df041b8bf8e37debc0d6a871080b64eea7a372 Mon Sep 17 00:00:00 2001 From: Martin Roth Date: Mon, 28 Jul 2014 14:22:32 -0600 Subject: mainboard/intel/minnowmax: Add MinnowMax mainboard MinnowMax board using Intel's Bay Trail FSP Working: - Booting from SATA / USB / (USB3 with latest SeaBIOS) Not working: - Boot from SD - S3 Suspend / Resume ***** To configure the FSP ***** Download the Bay Trail FSP and the binary config tool: Modify the standard Bay Trail FSP: run the bct tool with the command line options: bct --bin \ --absf src/vendorcode/intel/fsp/baytrail/absf/minnowmax_Xgb.absf \ --bout Here are the required changes for modifying the FSP manually: Enable Memory Down: Enabled DRAM Speed: 1066 MHz DIMM_DWidth: x16 DIMM_Density: 4 Gbit (2GB Minnow Max) / 2 Gbit (1GB Minnow Max) tCL: 7 tRP_tRCD: 7 tWR: 8 tRRD: 6 tRTP: 4 tFAW: 27 Other FSP values can remain the same. ***** To configure the vbios ***** The vbios is in the Bay Trail FSP package. Download Intel's "Binary Modification Program" (BMP) Use it to disable all ports except HDMI on port B. Change-Id: I00d90e0d838d70c9d25c69f5115d0c9d6d19855c Signed-off-by: Martin Roth Reviewed-on: http://review.coreboot.org/6429 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan --- src/mainboard/intel/minnowmax/devicetree.cb | 80 +++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 src/mainboard/intel/minnowmax/devicetree.cb (limited to 'src/mainboard/intel/minnowmax/devicetree.cb') diff --git a/src/mainboard/intel/minnowmax/devicetree.cb b/src/mainboard/intel/minnowmax/devicetree.cb new file mode 100644 index 0000000000..4e3833ecbc --- /dev/null +++ b/src/mainboard/intel/minnowmax/devicetree.cb @@ -0,0 +1,80 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; version 2 of the License. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +chip soc/intel/fsp_baytrail + + #### ACPI Register Settings #### + register "fadt_pm_profile" = "PM_UNSPECIFIED" + register "fadt_boot_arch" = "ACPI_FADT_LEGACY_FREE" + + #### FSP register settings #### + register "SataMode" = "SATA_MODE_AHCI" + register "MrcInitSPDAddr1" = "SPD_ADDR_DEFAULT" + register "MrcInitSPDAddr2" = "SPD_ADDR_DEFAULT" + register "MrcInitTsegSize" = "TSEG_SIZE_DEFAULT" + register "MrcInitMmioSize" = "MMIO_SIZE_DEFAULT" + register "eMMCBootMode" = "EMMC_FOLLOWS_DEVICETREE" + register "IgdDvmt50PreAlloc" = "IGD_MEMSIZE_DEFAULT" + register "ApertureSize" = "APERTURE_SIZE_DEFAULT" + register "GttSize" = "GTT_SIZE_DEFAULT" + register "LpssSioEnablePciMode" = "LPSS_PCI_MODE_DEFAULT" + register "AzaliaAutoEnable" = "AZALIA_FOLLOWS_DEVICETREE" + register "LpeAcpiModeEnable" = "LPE_ACPI_MODE_DISABLED" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # 8086 0F00 - SoC router - + device pci 02.0 on end # 8086 0F31 - GFX micro HDMI + device pci 03.0 off end # 8086 0F38 - MIPI - + + device pci 10.0 off end # 8086 0F14 - EMMC Port - + device pci 11.0 off end # 8086 0F15 - SDIO Port - + device pci 12.0 on end # 8086 0F16 - SD Port MicroSD on SD3 + device pci 13.0 on end # 8086 0F23 - SATA AHCI Onboard & HSEC + device pci 14.0 on end # 8086 0F35 - USB XHCI Onboard & HSEC + device pci 15.0 on end # 8086 0F28 - LP Engine Audio LSEC + device pci 17.0 off end # 8086 0F50 - MMC Port - + device pci 18.0 on end # 8086 0F40 - SIO - DMA - + device pci 18.1 off end # 8086 0F41 - I2C Port 1 (0) - + device pci 18.2 off end # 8086 0F42 - I2C Port 2 (1) - (testpoints) + device pci 18.3 off end # 8086 0F43 - I2C Port 3 (2) - + device pci 18.4 off end # 8086 0F44 - I2C Port 4 (3) - + device pci 18.5 off end # 8086 0F45 - I2C Port 5 (4) - + device pci 18.6 on end # 8086 0F46 - I2C Port 6 (5) LSEC + device pci 18.7 on end # 8086 0F47 - I2C Port 7 (6) HSEC + device pci 1a.0 on end # 8086 0F18 - TXE - + device pci 1b.0 off end # 8086 0F04 - HD Audio - + device pci 1c.0 off end # 8086 0F48 - PCIe Port 1 (0) - + device pci 1c.1 off end # 8086 0F4A - PCIe Port 2 (1) - + device pci 1c.2 on end # 8086 0F4C - PCIe Port 3 (2) Onboard GBE + device pci 1c.3 on end # 8086 0F4E - PCIe Port 4 (3) HSEC + device pci 1d.0 off end # 8086 0F34 - USB EHCI - + device pci 1e.0 on end # 8086 0F06 - SIO - DMA - + device pci 1e.1 on end # 8086 0F08 - PWM 1 LSEC + device pci 1e.2 on end # 8086 0F09 - PWM 2 LSEC + device pci 1e.3 on end # 8086 0F0A - HSUART 1 LSEC + device pci 1e.4 on end # 8086 0F0C - HSUART 2 LSEC + device pci 1e.5 on end # 8086 0F0E - SPI LSEC + device pci 1f.0 on end # 8086 0F1C - LPC bridge No connector + device pci 1f.3 on end # 8086 0F12 - SMBus 0 SPC + end +end -- cgit v1.2.3