From c6f2bd0d69d52b3ace287e6c3418109e2ac49957 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 19 Jan 2010 21:15:01 +0000 Subject: Add Yabel support (int 15 5fXX callbacks for vga bios) on the kontron 986lcd-m so it's possible to use the LCD panel connector. Values are hard coded instead of read from CMOS but it's a start. Signed-off-by: Stefan Reinauer Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/kontron/986lcd-m/mainboard.c | 49 ++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) (limited to 'src/mainboard/kontron/986lcd-m/mainboard.c') diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c index 9a2a5fdc5c..e45aeb5f2d 100644 --- a/src/mainboard/kontron/986lcd-m/mainboard.c +++ b/src/mainboard/kontron/986lcd-m/mainboard.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include "chip.h" @@ -34,6 +35,49 @@ int add_mainboard_resources(struct lb_memory *mem) return add_northbridge_resources(mem); } +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL +static int int15_handler(void) +{ +#define BOOT_DISPLAY_DEFAULT 0 +#define BOOT_DISPLAY_CRT (1 << 0) +#define BOOT_DISPLAY_TV (1 << 1) +#define BOOT_DISPLAY_EFP (1 << 2) +#define BOOT_DISPLAY_LCD (1 << 3) +#define BOOT_DISPLAY_CRT2 (1 << 4) +#define BOOT_DISPLAY_TV2 (1 << 5) +#define BOOT_DISPLAY_EFP2 (1 << 6) +#define BOOT_DISPLAY_LCD2 (1 << 7) + + printk_debug("%s: AX=%04x BX=%04x CX=%04x DX=%04x\n", + __func__, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX); + + switch (M.x86.R_AX) { + case 0x5f35: /* Boot Display */ + M.x86.R_AX = 0x005f; // Success + M.x86.R_CL = BOOT_DISPLAY_DEFAULT; + break; + case 0x5f40: /* Boot Panel Type */ + // M.x86.R_AX = 0x015f; // Supported but failed + M.x86.R_AX = 0x005f; // Success + M.x86.R_CL = 3; // Display ID + break; + default: + /* Interrupt was not handled */ + return 0; + } + + /* Interrupt handled */ + return 1; +} + +static void int15_install(void) +{ + typedef int (* yabel_handleIntFunc)(void); + extern yabel_handleIntFunc yabel_intFuncArray[256]; + yabel_intFuncArray[0x15] = int15_handler; +} +#endif + /* Hardware Monitor */ static u16 hwm_base = 0xa00; @@ -182,8 +226,13 @@ static void verb_setup(void) // mainboard_enable is executed as first thing after // enumerate_buses(). + static void mainboard_enable(device_t dev) { +#if CONFIG_PCI_OPTION_ROM_RUN_YABEL + /* Install custom int15 handler for VGA OPROM */ + int15_install(); +#endif verb_setup(); hwm_setup(); } -- cgit v1.2.3