From 40f9ce93fa1d9e5206cd5c1081d22c60bfc6d3f3 Mon Sep 17 00:00:00 2001 From: Nico Huber Date: Tue, 22 Oct 2013 11:07:23 +0200 Subject: kontron/ktqm77: Improve W83627DHG's GPIO config Fix some outputs of the super i/o that should be GPIOs and make variables out of magic values that configure LVDS. Change-Id: Ib9eef065980cefff0046485549a68cf8f070d5b9 Signed-off-by: Nico Huber Reviewed-on: http://review.coreboot.org/6248 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/kontron/ktqm77/romstage.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'src/mainboard/kontron') diff --git a/src/mainboard/kontron/ktqm77/romstage.c b/src/mainboard/kontron/ktqm77/romstage.c index 09fd634606..d74f3a6da3 100644 --- a/src/mainboard/kontron/ktqm77/romstage.c +++ b/src/mainboard/kontron/ktqm77/romstage.c @@ -140,13 +140,22 @@ static void pnp_exit_ext_func_mode(device_t dev) static void superio_gpio_config(void) { + int lvds_3v = 0; // 0 (5V) or 1 (3V3) + int dis_bl_inv = 1; // backlight inversion: 1 = disabled, 0 = enabled device_t dev = PNP_DEV(0x2e, 0x9); pnp_enter_ext_func_mode(dev); + pnp_write_config(dev, 0x29, 0x02); /* Pins 119, 120 are GPIO21, 20 */ + pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO2+3 */ + pnp_write_config(dev, 0x2a, 0x01); /* Pins 62, 63, 65, 66 are + GPIO27, 26, 25, 24 */ + pnp_write_config(dev, 0x2c, 0xc3); /* Pin 90 is GPIO32, + Pins 78~85 are UART B */ + pnp_write_config(dev, 0x2d, 0x00); /* Pins 67, 68, 70~73, 75, 77 are + GPIO57~50 */ pnp_set_logical_device(dev); /* Values can only be changed, when devices are enabled. */ - pnp_write_config(dev, 0x30, 0x03); /* Enable GPIO2+3 */ pnp_write_config(dev, 0xe3, 0xdd); /* GPIO2 bits 1, 5 are output */ - pnp_write_config(dev, 0xe4, 0x22); /* GPIO2 bits 1, 5 are 1 */ + pnp_write_config(dev, 0xe4, (dis_bl_inv << 5) | (lvds_3v << 1)); /* GPIO2 bits 1, 5 */ pnp_exit_ext_func_mode(dev); } -- cgit v1.2.3