From 38f147ed3d9fdd6bfb23d7226f6fdd3fc5db53d0 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Mon, 8 Feb 2010 12:20:50 +0000 Subject: janitor task: unify and cleanup naming. cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by: Stefan Reinauer Acked-by: Patrick Georgi git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5092 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/lippert/roadrunner-lx/Makefile.inc | 6 +- .../lippert/roadrunner-lx/cache_as_ram_auto.c | 169 --------------------- src/mainboard/lippert/roadrunner-lx/romstage.c | 169 +++++++++++++++++++++ 3 files changed, 172 insertions(+), 172 deletions(-) delete mode 100644 src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c create mode 100644 src/mainboard/lippert/roadrunner-lx/romstage.c (limited to 'src/mainboard/lippert/roadrunner-lx') diff --git a/src/mainboard/lippert/roadrunner-lx/Makefile.inc b/src/mainboard/lippert/roadrunner-lx/Makefile.inc index f101f22d4e..0e4b263223 100644 --- a/src/mainboard/lippert/roadrunner-lx/Makefile.inc +++ b/src/mainboard/lippert/roadrunner-lx/Makefile.inc @@ -12,7 +12,7 @@ crt0s += $(src)/cpu/x86/32bit/entry32.inc crt0s += $(src)/cpu/x86/16bit/reset16.inc crt0s += $(src)/arch/i386/lib/id.inc crt0s += $(src)/cpu/amd/model_lx/cache_as_ram.inc -crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/auto.inc +crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc ldscripts := $(src)/arch/i386/init/ldscript_fallback_cbfs.lb ldscripts += $(src)/cpu/x86/16bit/entry16.lds @@ -22,8 +22,8 @@ ldscripts += $(src)/arch/i386/lib/failover.lds ifdef POST_EVALUATION -$(obj)/mainboard/$(MAINBOARDDIR)/auto.inc: $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c $(obj)/build.h - $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/cache_as_ram_auto.c -o $@ +$(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(obj)/build.h + $(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(src) -I. -c -S $(src)/mainboard/$(MAINBOARDDIR)/romstage.c -o $@ perl -e 's/\.rodata/.rom.data/g' -pi $@ perl -e 's/\.text/.section .rom.text/g' -pi $@ diff --git a/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c b/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c deleted file mode 100644 index 3884a27eb6..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/cache_as_ram_auto.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 LiPPERT Embedded Computers GmbH - * Copyright (C) 2007 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* Based on cache_as_ram_auto.c from AMD's DB800 and DBM690T mainboards. */ - -#define ASSEMBLY 1 -#define __PRE_RAM__ - -#include -#include -#include -#include -#include -#include -#include "pc80/serial.c" -#include "arch/i386/lib/console.c" -#include "lib/ramtest.c" -#include "cpu/x86/bist.h" -#include "cpu/x86/msr.h" -#include -#include -#include "southbridge/amd/cs5536/cs5536.h" - -#define POST_CODE(x) outb(x, 0x80) - -#include "southbridge/amd/cs5536/cs5536_early_smbus.c" -#include "southbridge/amd/cs5536/cs5536_early_setup.c" -#include "superio/ite/it8712f/it8712f_early_serial.c" - -#define ManualConf 1 /* No automatic strapped PLL config */ -#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */ -#define PLLMSRlo 0x00DE6001 -#define DIMM0 0xA0 -#define DIMM1 0xA2 - -static inline int spd_read_byte(unsigned int device, unsigned int address) -{ - if (device != DIMM0) - return 0xFF; /* No DIMM1, don't even try. */ - - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/lx/raminit.h" -#include "northbridge/amd/lx/pll_reset.c" -#include "northbridge/amd/lx/raminit.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/model_lx/cpureginit.c" -#include "cpu/amd/model_lx/syspreinit.c" - -static void msr_init(void) -{ - msr_t msr; - - /* Setup access to the cache for under 1MB. */ - msr.hi = 0x24fffc02; - msr.lo = 0x1000A000; /* 0-A0000 write back */ - wrmsr(CPU_RCONF_DEFAULT, msr); - - msr.hi = 0x0; /* Write back */ - msr.lo = 0x0; - wrmsr(CPU_RCONF_A0_BF, msr); - wrmsr(CPU_RCONF_C0_DF, msr); - wrmsr(CPU_RCONF_E0_FF, msr); - - /* Setup access to the cache for under 640K. Note MC not setup yet. */ - msr.hi = 0x20000000; - msr.lo = 0xfff80; - wrmsr(MSR_GLIU0 + 0x20, msr); - - msr.hi = 0x20000000; - msr.lo = 0x80fffe0; - wrmsr(MSR_GLIU0 + 0x21, msr); - - msr.hi = 0x20000000; - msr.lo = 0xfff80; - wrmsr(MSR_GLIU1 + 0x20, msr); - - msr.hi = 0x20000000; - msr.lo = 0x80fffe0; - wrmsr(MSR_GLIU1 + 0x21, msr); -} - -static const u16 sio_init_table[] = { // hi=data, lo=index - 0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...) - 0x1E2C, // disable ATXPowerGood - will cause a reboot! - 0x0423, // don't delay POWerOK1/2 - 0x9072, // watchdog triggers POWOK, counts seconds -#if !CONFIG_USE_WATCHDOG_ON_BOOT - 0x0073, 0x0074, // disable watchdog by setting timeout to 0 -#endif - 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins - 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) - 0x1E2C, // VIN6=enabled?, FAN4/5 enabled, VIN7=internal, VIN3=enabled - 0x46B8, 0x0CB9, // enable pullups - 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 - 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) - 0x26C8, // config GP15,12,11 as output; GP14 as input - 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use) -}; - -/* Early mainboard specific GPIO setup. */ -static void mb_gpio_init(void) -{ - int i; - - /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ - it8712f_enter_conf(); - for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { - u16 val = sio_init_table[i]; - outb((u8)val, SIO_INDEX); - outb(val >> 8, SIO_DATA); - } - it8712f_exit_conf(); -} - -void cache_as_ram_main(void) -{ - POST_CODE(0x01); - - static const struct mem_controller memctrl[] = { - {.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}} - }; - - SystemPreInit(); - msr_init(); - - cs5536_early_setup(); - - /* - * Note: must do this AFTER the early_setup! It is counting on some - * early MSR setup for CS5536. - */ - it8712f_enable_serial(0, CONFIG_TTYS0_BASE); // Does not use its 1st parameter - mb_gpio_init(); - uart_init(); - console_init(); - - pll_reset(ManualConf); - - cpuRegInit(); - - sdram_initialize(1, memctrl); - - /* Check memory. */ - /* ram_check(0x00000000, 640 * 1024); */ - - /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ - return; -} diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c new file mode 100644 index 0000000000..e8cfee55bb --- /dev/null +++ b/src/mainboard/lippert/roadrunner-lx/romstage.c @@ -0,0 +1,169 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 LiPPERT Embedded Computers GmbH + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */ + +#define ASSEMBLY 1 +#define __PRE_RAM__ + +#include +#include +#include +#include +#include +#include +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "lib/ramtest.c" +#include "cpu/x86/bist.h" +#include "cpu/x86/msr.h" +#include +#include +#include "southbridge/amd/cs5536/cs5536.h" + +#define POST_CODE(x) outb(x, 0x80) + +#include "southbridge/amd/cs5536/cs5536_early_smbus.c" +#include "southbridge/amd/cs5536/cs5536_early_setup.c" +#include "superio/ite/it8712f/it8712f_early_serial.c" + +#define ManualConf 1 /* No automatic strapped PLL config */ +#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */ +#define PLLMSRlo 0x00DE6001 +#define DIMM0 0xA0 +#define DIMM1 0xA2 + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + if (device != DIMM0) + return 0xFF; /* No DIMM1, don't even try. */ + + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/lx/raminit.h" +#include "northbridge/amd/lx/pll_reset.c" +#include "northbridge/amd/lx/raminit.c" +#include "lib/generic_sdram.c" +#include "cpu/amd/model_lx/cpureginit.c" +#include "cpu/amd/model_lx/syspreinit.c" + +static void msr_init(void) +{ + msr_t msr; + + /* Setup access to the cache for under 1MB. */ + msr.hi = 0x24fffc02; + msr.lo = 0x1000A000; /* 0-A0000 write back */ + wrmsr(CPU_RCONF_DEFAULT, msr); + + msr.hi = 0x0; /* Write back */ + msr.lo = 0x0; + wrmsr(CPU_RCONF_A0_BF, msr); + wrmsr(CPU_RCONF_C0_DF, msr); + wrmsr(CPU_RCONF_E0_FF, msr); + + /* Setup access to the cache for under 640K. Note MC not setup yet. */ + msr.hi = 0x20000000; + msr.lo = 0xfff80; + wrmsr(MSR_GLIU0 + 0x20, msr); + + msr.hi = 0x20000000; + msr.lo = 0x80fffe0; + wrmsr(MSR_GLIU0 + 0x21, msr); + + msr.hi = 0x20000000; + msr.lo = 0xfff80; + wrmsr(MSR_GLIU1 + 0x20, msr); + + msr.hi = 0x20000000; + msr.lo = 0x80fffe0; + wrmsr(MSR_GLIU1 + 0x21, msr); +} + +static const u16 sio_init_table[] = { // hi=data, lo=index + 0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...) + 0x1E2C, // disable ATXPowerGood - will cause a reboot! + 0x0423, // don't delay POWerOK1/2 + 0x9072, // watchdog triggers POWOK, counts seconds +#if !CONFIG_USE_WATCHDOG_ON_BOOT + 0x0073, 0x0074, // disable watchdog by setting timeout to 0 +#endif + 0xBF25, 0x372A, 0xF326, // select GPIO function for most pins + 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1) + 0x1E2C, // VIN6=enabled?, FAN4/5 enabled, VIN7=internal, VIN3=enabled + 0x46B8, 0x0CB9, // enable pullups + 0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1 + 0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector) + 0x26C8, // config GP15,12,11 as output; GP14 as input + 0x2DF5, // map Hw Monitor Thermal Output to GP55 + 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use) +}; + +/* Early mainboard specific GPIO setup. */ +static void mb_gpio_init(void) +{ + int i; + + /* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */ + it8712f_enter_conf(); + for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) { + u16 val = sio_init_table[i]; + outb((u8)val, SIO_INDEX); + outb(val >> 8, SIO_DATA); + } + it8712f_exit_conf(); +} + +void cache_as_ram_main(void) +{ + POST_CODE(0x01); + + static const struct mem_controller memctrl[] = { + {.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}} + }; + + SystemPreInit(); + msr_init(); + + cs5536_early_setup(); + + /* + * Note: must do this AFTER the early_setup! It is counting on some + * early MSR setup for CS5536. + */ + it8712f_enable_serial(0, CONFIG_TTYS0_BASE); // Does not use its 1st parameter + mb_gpio_init(); + uart_init(); + console_init(); + + pll_reset(ManualConf); + + cpuRegInit(); + + sdram_initialize(1, memctrl); + + /* Check memory. */ + /* ram_check(0x00000000, 640 * 1024); */ + + /* Memory is setup. Return to cache_as_ram.inc and continue to boot. */ + return; +} -- cgit v1.2.3