From 57398af2a4cff42effd17dac39e8805185ad290c Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Thu, 11 Sep 2003 13:53:29 +0000 Subject: update Config.lb and add khepri ht chain git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/newisys/khepri/Config.lb | 345 +++++++++++++++++++++++---------- 1 file changed, 242 insertions(+), 103 deletions(-) (limited to 'src/mainboard/newisys/khepri/Config.lb') diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index 2050b01367..ce5b9add67 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -3,36 +3,178 @@ uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE uses MAINBOARD uses ARCH -# -# +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM_START +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE + ### -### Set all of the defaults for an x86 architecture +### Build options ### -# -# + +## +## Build code for the fallback boot +## +option HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +option HAVE_HARD_RESET=1 + +## +## Build code to export a programmable irq routing table +## +option HAVE_PIRQ_TABLE=1 +option IRQ_SLOT_COUNT=7 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +option HAVE_MP_TABLE=1 + +## +## Build code to export a CMOS option table +## +option HAVE_OPTION_TABLE=1 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +option CONFIG_SMP=1 +option CONFIG_MAX_CPUS=2 + +## +## Build code to setup a generic IOAPIC +## +option CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +option MAINBOARD_PART_NUMBER="KHEPRI" +option MAINBOARD_VENDOR="NEWISYS" + ### -### Build the objects we have code for in this directory. +### LinuxBIOS layout values ### -##object mainboard.o + +## ROM_SIZE is the size of boot ROM that this board will use. +option ROM_SIZE = 524288 + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +option ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +option STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +option HEAP_SIZE=0x4000 + +## +## Only use the option table in a normal image +## +option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + option ROM_SECTION_SIZE = FALLBACK_SIZE + option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + option ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +option CONFIG_ROM_STREAM = 1 + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +option XIP_ROM_SIZE=65536 +option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + +## +## Set all of the defaults for an x86 architecture +## + +arch i386 end +#cpu k8 end + +## +## Build the objects we have code for in this directory. +## + +#object mainboard.o driver mainboard.o -object static_devices.o +#object static_devices.o if HAVE_MP_TABLE object mptable.o end if HAVE_PIRQ_TABLE object irq_tables.o end -# -arch i386 end -#cpu k8 end -# -### -### Build our 16 bit and 32 bit linuxBIOS entry code -### +object reset.o + +## +## Romcc output +## +makerule ./failover.E + depends "$(MAINBOARD)/failover.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" +end + +makerule ./failover.inc + depends "./failover.E ./romcc" + action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" +end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c" + action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" +end +makerule ./auto.inc + depends "./auto.E ./romcc" + action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## mainboardinit cpu/i386/entry16.inc mainboardinit cpu/i386/entry32.inc ldscript /cpu/i386/entry16.lds ldscript /cpu/i386/entry32.lds -# -### -### Build our reset vector (This is where linuxBIOS is entered) -### + +## +## Build our reset vector (This is where linuxBIOS is entered) +## if USE_FALLBACK_IMAGE mainboardinit cpu/i386/reset16.inc ldscript /cpu/i386/reset16.lds @@ -40,109 +182,106 @@ else mainboardinit cpu/i386/reset32.inc ldscript /cpu/i386/reset32.lds end -# -#### Should this be in the northbridge code? + +### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc -# -### -### Include an id string (For safe flashing) -### + +## +## Include an id string (For safe flashing) +## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -# -#### -#### This is the early phase of linuxBIOS startup -#### Things are delicate and we test to see if we should -#### failover to another image. -#### -#option MAX_REBOOT_CNT=2 -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds -end -# -### -### Setup our mtrrs -### + +## +## Setup our mtrrs +## mainboardinit cpu/k8/earlymtrr.inc + ### -### Only the bootstrap cpu makes it here. -### Failover if we need to +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. ### -# if USE_FALLBACK_IMAGE - mainboardinit ./failover.inc + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc end -# -# -### -### Setup the serial port -### -#mainboardinit superiowinbond/w83627hf/setup_serial.inc -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc -# -#### -#### O.k. We aren't just an intermediary anymore! -#### -# ### -### When debugging disable the watchdog timer +### O.k. We aren't just an intermediary anymore! ### -##option MAXIMUM_CONSOLE_LOGLEVEL=7 -#default MAXIMUM_CONSOLE_LOGLEVEL=7 -# -#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end -# -### -### Romcc output -### -#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E" -#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc" -#mainboardinit .failover.inc -makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" -end - -makerule ./failover.inc - depends "./romcc ./failover.E" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" -end -makerule ./auto.inc - depends "./romcc ./auto.E" - action "./romcc -mcpu=k8 -O ./auto.E > auto.inc" -end +## +## Setup RAM +## mainboardinit cpu/k8/enable_mmx_sse.inc mainboardinit ./auto.inc mainboardinit cpu/k8/disable_mmx_sse.inc -# -### -### Include the secondary Configuration files -### -northbridge amd/amdk8 -end -southbridge amd/amd8111 "amd8111" -end -southbridge amd/amd8131 "amd8131" + +## +## Include the secondary Configuration files +## +dir /pc80 +config chip.h + +northbridge amd/amdk8 "mc0" + pci 0:18.0 + pci 0:18.0 + pci 0:18.0 + pci 0:18.1 + pci 0:18.2 + pci 0:18.3 + southbridge amd/amd8131 "amd8131" + pci 1:0.0 + pci 1:0.1 + pci 1:1.0 + pci 1:1.1 + end + southbridge amd/amd8111 "amd8111" + pci 1:0.0 + pci 1:1.0 + pci 1:1.1 + pci 1:1.2 + pci 1:1.3 + pci 1:1.5 + pci 1:1.6 + superio NSC/pc87360 + pnp 1:2e.0 + pnp 1:2e.1 + pnp 1:2e.2 + pnp 1:2e.3 + pnp 1:2e.4 + pnp 1:2e.5 + pnp 1:2e.6 + pnp 1:2e.7 + pnp 1:2e.8 + pnp 1:2e.9 + pnp 1:2e.a + register "com1" = "{1, 0, 0x3f8, 4}" + register "lpt" = "{1}" + end + end end -#mainboardinit archi386/smp/secondary.inc -superio NSC/pc87360 - register "com1" = "{1}" - register "lpt" = "{1}" + +northbridge amd/amdk8 "mc1" + pci 0:19.0 + pci 0:19.0 + pci 0:19.0 + pci 0:19.1 + pci 0:19.2 + pci 0:19.3 end -dir /pc80 -##dir /src/superio/winbond/w83627hf -#dir /cpu/k8 -cpu k8 "cpu0" - register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}" + +cpu k8 "cpu0" + register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }" end cpu k8 "cpu1" end +## +## Include the old serial code for those few places that still need it. +## +mainboardinit pc80/serial.inc +mainboardinit arch/i386/lib/console.inc + -- cgit v1.2.3