From 3a4ed157dcd93f845b92fcea272368bdc41d7a11 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Sun, 5 Dec 2010 22:36:14 +0000 Subject: W83627DHG/W83627EHG fixups for virtual LDNs. W83627DHG: - Add proper "virtual LDN" handling for the LDNs that need it (i.e., those that don't have their "enable" bit in bit 0 of the 0x30 register). - Fix various I/O masks in the pnp_dev_info[] array as per datasheet. Add missing PNP_IRQ0 to the W83627DHG_ACPI LDN. W83627EHG: - Similar to W83627DHG, improve the "virtual LDN" setup a bit (it was mostly implemented already, though). - Add missing PNP_IRQ0 to the W83627EHG_ACPI LDN. Also: Fix up devicetree.cb of all boards using W83627DHG/W83627EHG to adapt for the virtual LDNs. include/device/pnp.h: Add comment that 'function' (which refers to the LDN and should probably be renamed later) has to be at least 16 bits wide. In theory LDNs could use u8, but due to the virtual LDN info being encoded in the "high byte" of 'function' it must be at least u16. asrock/939a785gmh/romstage.c: Drop unused GPIO6_DEV. ibase/mb899/romstage.c: Use DUMMY_DEV instead of a specific LDN (serial port 1 in this case) to avoid confusion. The global registers manipulated there are accessible from any LDN. Signed-off-by: Uwe Hermann Acked-by: Rudolf Marek git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6140 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/nvidia/l1_2pvv/devicetree.cb | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) (limited to 'src/mainboard/nvidia') diff --git a/src/mainboard/nvidia/l1_2pvv/devicetree.cb b/src/mainboard/nvidia/l1_2pvv/devicetree.cb index 6d7c8468d4..1340cb38f7 100644 --- a/src/mainboard/nvidia/l1_2pvv/devicetree.cb +++ b/src/mainboard/nvidia/l1_2pvv/devicetree.cb @@ -28,22 +28,36 @@ chip northbridge/amd/amdk8/root_complex # Root complex io 0x60 = 0x2f8 irq 0x70 = 3 end - device pnp 2e.5 on # PS/2 keyboard + device pnp 2e.5 on # PS/2 keyboard & mouse io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off # SFI - io 0x62 = 0x100 + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 end - device pnp 2e.7 off # GPIO, Game port, MIDI + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 off # Game port io 0x60 = 0x220 + end + device pnp 2e.207 off # MIDI io 0x62 = 0x300 irq 0x70 = 9 end - device pnp 2e.8 off end # WDTO PLED - device pnp 2e.9 off end # GPIO SUSLED + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off # WDTO#, PLED + end + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end device pnp 2e.a off end # ACPI device pnp 2e.b on # Hardware monitor io 0x60 = 0x290 -- cgit v1.2.3