From e361efd7d7d592b0061d30aba2f41f5d088f8dc7 Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Wed, 13 Sep 2006 19:29:31 +0000 Subject: Add DCON support. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2409 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/olpc/rev_a/cmos.layout | 1 + src/mainboard/olpc/rev_a/mainboard.c | 62 ++++++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+) (limited to 'src/mainboard/olpc') diff --git a/src/mainboard/olpc/rev_a/cmos.layout b/src/mainboard/olpc/rev_a/cmos.layout index 5ba4c032c1..7b3fe21b49 100644 --- a/src/mainboard/olpc/rev_a/cmos.layout +++ b/src/mainboard/olpc/rev_a/cmos.layout @@ -36,6 +36,7 @@ entries 424 4 e 7 boot_third 428 4 h 0 boot_index 432 8 h 0 boot_countdown +440 1 e 0 dcon_present 1008 16 h 0 check_sum enumerations diff --git a/src/mainboard/olpc/rev_a/mainboard.c b/src/mainboard/olpc/rev_a/mainboard.c index 80d01586c8..50698d5001 100644 --- a/src/mainboard/olpc/rev_a/mainboard.c +++ b/src/mainboard/olpc/rev_a/mainboard.c @@ -4,9 +4,69 @@ #include #include #include +#include #include "chip.h" +#include "../southbridge/amd/cs5536/cs5536_smbus2.h" +/* Borrowed from mc146818rtc.c */ +#define CMOS_READ(addr) ({ \ + outb((addr),RTC_PORT(0)); \ + inb(RTC_PORT(1)); \ + }) + +#define CMOS_WRITE(val, addr) ({ \ + outb((addr),RTC_PORT(0)); \ + outb((val),RTC_PORT(1)); \ + }) + +static void write_bit(unsigned char val) { + + unsigned char byte = CMOS_READ(440 / 8); + + /* Don't change it if its already set */ + + if ((byte & 1) == (val & 1)) + return; + + byte &= ~1; + byte |= val & 1; + CMOS_WRITE(val, 440/8); +} + +static unsigned short _getsmbusbase(void) { + unsigned devfn = PCI_DEVFN(0xf, 0); + device_t dev = dev_find_slot(0x0, devfn); + unsigned long addr = pci_read_config32(dev, PCI_BASE_ADDRESS_0); + + return (unsigned short) (addr & ~1); +} + +static void init_dcon(void) { + + int ret = 1; + unsigned short rev = 0; + unsigned short iobase = _getsmbusbase(); + + printk_debug("CHECKING FOR DCON (%x)\n", iobase); + + /* Get the IO base for the SMBUS */ + + rev = do_smbus_read_word(iobase, 0x0D << 1, 0x00); + + if (rev & 0xDC00) { + printk_debug("DCON FOUND - REV %x\n", rev); + + /* Enable the DCON */ + ret = do_smbus_write_word(iobase, 0x0D << 1, 0x01, 0x0069); + if (ret != 0) + printk_debug("DCON ENABLE FAILED\n", ret); + } + else + printk_debug("DCON NOT FOUND (%x)\n", rev); + + write_bit(rev > 0 ? 1 : 0); +} static void init(struct device *dev) { /* @@ -32,6 +92,8 @@ static void init(struct device *dev) { pci_write_config8(usb, PCI_INTERRUPT_LINE, usbirq); } #endif + + init_dcon(); printk_debug("OLPC REVA EXIT %s\n", __FUNCTION__); } -- cgit v1.2.3