From 6da74da345dadce4ad0775c37a8f4a7ac9b3abf5 Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Tue, 27 Sep 2016 21:28:57 +0200 Subject: mainboard/sunw/ultra40/romstage.c: Use tabs for indents Change-Id: I9b7be74625dfcb6317a1cdb61d0dc77d7f359462 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/16776 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/sunw/ultra40/romstage.c | 96 +++++++++++++++++------------------ 1 file changed, 48 insertions(+), 48 deletions(-) (limited to 'src/mainboard/sunw') diff --git a/src/mainboard/sunw/ultra40/romstage.c b/src/mainboard/sunw/ultra40/romstage.c index d0f569c355..397acfec13 100644 --- a/src/mainboard/sunw/ultra40/romstage.c +++ b/src/mainboard/sunw/ultra40/romstage.c @@ -30,12 +30,12 @@ static void memreset(int controllers, const struct mem_controller *ctrl) { } #ifdef ENABLE_ONBOARD_SCSI static void sio_gpio_setup(void) { - unsigned value; + unsigned value; - /*Enable onboard scsi*/ - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1 << 7)|(0 << 2)|(0 << 1)|(0 << 0)); // GP21, offset 0x2c, DISABLE_SCSI_L - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1 << 1))); + /*Enable onboard scsi*/ + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x2c, (1 << 7)|(0 << 2)|(0 << 1)|(0 << 0)); // GP21, offset 0x2c, DISABLE_SCSI_L + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x4c); + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x4c, (value|(1 << 1))); } #endif @@ -55,12 +55,12 @@ static inline int spd_read_byte(unsigned device, unsigned address) //set GPIO to input mode #define CK804_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 5, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M9,GPIO6, PCIXB2_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M8,GPIO16, PCIXB2_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+ 7, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* M5,GPIO8, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff),((0 << 4)|(0 << 2)|(0 << 0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ #include "southbridge/nvidia/ck804/early_setup_car.c" #include "cpu/amd/model_fxx/init_cpus.c" @@ -68,25 +68,25 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - unsigned value; - uint32_t dword; - uint8_t byte; + unsigned value; + uint32_t dword; + uint8_t byte; - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 29)|(1 << 0); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + dword |= (1 << 29)|(1 << 0); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); - value &= 0xbf; - lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); + value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); + value &= 0xbf; + lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); } void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) @@ -100,49 +100,49 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) DIMM5, DIMM7, 0, 0, }; - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; + int needs_reset; + unsigned bsp_apicid = 0, nodes; + struct mem_controller ctrl[8]; - if (!cpu_init_detectedx && boot_cpu()) { + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ enumerate_ht_chain(); sio_setup(); - } + } - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx); lpc47b397_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); + console_init(); /* Halt if there was a built in self test failure */ report_bist_failure(bist); - setup_ultra40_resource_map(); + setup_ultra40_resource_map(); needs_reset = setup_coherent_ht_domain(); - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); #endif - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } + needs_reset |= ht_setup_chains_x(); + needs_reset |= ck804_early_setup_x(); + if (needs_reset) { + printk(BIOS_INFO, "ht reset -\n"); + soft_reset(); + } - allow_all_aps_stop(bsp_apicid); + allow_all_aps_stop(bsp_apicid); - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); enable_smbus(); -- cgit v1.2.3