From eefdb038981a0fcc93df5c6c934f8138a43873bb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 27 Oct 2004 00:37:30 +0000 Subject: S2885 winbond Superio all resource set git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1717 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/tyan/s2885/Config.lb | 13 +++++++++++-- src/mainboard/tyan/s2885/Options.lb | 4 ++++ src/mainboard/tyan/s2885/auto.c | 8 +++++++- src/mainboard/tyan/s2885/chip.h | 2 +- src/mainboard/tyan/s2885/irq_tables.c | 2 +- src/mainboard/tyan/s2885/mptable.c | 2 +- 6 files changed, 25 insertions(+), 6 deletions(-) (limited to 'src/mainboard/tyan/s2885') diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb index 5064b781f7..2bdabea244 100644 --- a/src/mainboard/tyan/s2885/Config.lb +++ b/src/mainboard/tyan/s2885/Config.lb @@ -177,13 +177,20 @@ chip northbridge/amd/amdk8 irq 0x70 = 1 irq 0x72 = 12 end - device pnp 2e.6 off end # CIR - device pnp 2e.7 off end # GAME_MIDI_GIPO1 + device pnp 2e.6 off # CIR + io 0x60 = 0x100 + end + device pnp 2e.7 off # GAME_MIDI_GIPO1 + io 0x60 = 0x201 + io 0x62 = 0x330 + irq 0x70 = 9 + end device pnp 2e.8 off end # GPIO2 device pnp 2e.9 off end # GPIO3 device pnp 2e.a off end # ACPI device pnp 2e.b on # HW Monitor io 0x60 = 0x290 + irq 0x70 = 5 end end end @@ -192,6 +199,8 @@ chip northbridge/amd/amdk8 device pci 1.3 on end device pci 1.5 on end device pci 1.6 off end +# register "ide0_enable" = "1" +# register "ide1_enable" = "1" end end # device pci 18.0 diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 3d17ccb3e6..97238b80e9 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -32,6 +32,8 @@ uses LB_CKS_LOC uses MAINBOARD_PART_NUMBER uses MAINBOARD_VENDOR uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID uses LINUXBIOS_EXTRA_VERSION uses _RAMBASE uses CC @@ -117,6 +119,8 @@ default CONFIG_IOAPIC=1 ## default MAINBOARD_PART_NUMBER="Tyan" default MAINBOARD_VENDOR="s2885" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2885 ### ### LinuxBIOS layout values diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index 577dca8f1c..333aa90c29 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -50,22 +50,28 @@ static void soft2_reset(void) static void memreset_setup(void) { +#if 0 if (is_cpu_pre_c0()) { outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0 } else { +#endif outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1 +#if 0 } +#endif outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); } static void memreset(int controllers, const struct mem_controller *ctrl) { +#if 0 if (is_cpu_pre_c0()) { udelay(800); outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1 udelay(90); } +#endif } static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) @@ -111,7 +117,7 @@ static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) }; if(maxnodes>2) { - print_debug("this mainboard is only designed for 2 cpus\r\n"); +// print_debug("this mainboard is only designed for 2 cpus\r\n"); maxnodes=2; } diff --git a/src/mainboard/tyan/s2885/chip.h b/src/mainboard/tyan/s2885/chip.h index 0be04051da..bcedaec668 100644 --- a/src/mainboard/tyan/s2885/chip.h +++ b/src/mainboard/tyan/s2885/chip.h @@ -2,5 +2,5 @@ extern struct chip_operations mainboard_tyan_s2885_ops; struct mainboard_tyan_s2885_config { int fixup_scsi; - int fixup_vga; +// int fixup_vga; }; diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index b6a1c19460..84ebd0be97 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -18,7 +18,7 @@ const struct irq_routing_table intel_irq_routing_table = { 0x746b, /* Device */ 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x35, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0xd8, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { {3,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, {0x6,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index b5095a6cce..319883a160 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -149,7 +149,7 @@ void *smp_write_config_table(void *v) // AGP Display Adapter smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, 0x2, 0x10); -// Onboard Serial ATA +//Onboard Serial ATA smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, 0x2, 0x11); //Onboard Firewire smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, 0x2, 0x13); -- cgit v1.2.3