From f8ee1806ac524bc782c93eccc59ee3c929abddb9 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 18 Jan 2008 15:08:58 +0000 Subject: Rename almost all occurences of LinuxBIOS to coreboot. Due to the automatic nature of this update, I am self-acking. It worked in abuild. Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3053 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/tyan/s2892/Options.lb | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'src/mainboard/tyan/s2892/Options.lb') diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 8646e0a04b..9dbaf9dd31 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -35,7 +35,7 @@ uses MAINBOARD_VENDOR uses MAINBOARD uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID -uses LINUXBIOS_EXTRA_VERSION +uses COREBOOT_EXTRA_VERSION uses _RAMBASE uses CONFIG_GDB_STUB uses CROSS_COMPILE @@ -94,7 +94,7 @@ default FALLBACK_SIZE=0x40000 default HAVE_FALLBACK_BOOT=1 ## -## Build code to reset the motherboard from linuxBIOS +## Build code to reset the motherboard from coreboot ## default HAVE_HARD_RESET=1 @@ -116,7 +116,7 @@ default HAVE_MP_TABLE=1 default HAVE_OPTION_TABLE=1 ## -## Move the default LinuxBIOS cmos range off of AMD RTC registers +## Move the default coreboot cmos range off of AMD RTC registers ## default LB_CKS_RANGE_START=49 default LB_CKS_RANGE_END=122 @@ -176,10 +176,10 @@ default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1 default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2892 ### -### LinuxBIOS layout values +### coreboot layout values ### -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. default ROM_IMAGE_SIZE = 65536 ## @@ -198,7 +198,7 @@ default HEAP_SIZE=0x4000 default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE ## -## LinuxBIOS C code runs at this location in RAM +## Coreboot C code runs at this location in RAM ## default _RAMBASE=0x00004000 @@ -247,7 +247,7 @@ default TTYS0_BASE=0x3f8 default TTYS0_LCS=0x3 ## -### Select the linuxBIOS loglevel +### Select the coreboot loglevel ## ## EMERG 1 system is unusable ## ALERT 2 action must be taken immediately -- cgit v1.2.3