From 4d25212346c7cb1c245e123cb4e706998aa7197b Mon Sep 17 00:00:00 2001 From: Richard Spiegel Date: Mon, 16 Apr 2018 16:43:36 -0700 Subject: mb/google/kahlee/variants/kahlee/gpio.c: Convert GPIO to new format As part of preparing to make GPIO code independent of vendor code references, convert GPIO table format using newly defined macros. BUG=b:77999987 TEST=Build and boot kahlee. Change-Id: I0af768bb4dbcbfef0d2d08ffe869c1dfb6827974 Signed-off-by: Richard Spiegel Reviewed-on: https://review.coreboot.org/25694 Tested-by: build bot (Jenkins) Reviewed-by: Garrett Kirkendall Reviewed-by: Martin Roth Reviewed-by: Paul Menzel --- src/mainboard/google/kahlee/variants/kahlee/gpio.c | 48 +++++++++++----------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/google/kahlee/variants/kahlee/gpio.c b/src/mainboard/google/kahlee/variants/kahlee/gpio.c index 2f40546427..29d7817678 100644 --- a/src/mainboard/google/kahlee/variants/kahlee/gpio.c +++ b/src/mainboard/google/kahlee/variants/kahlee/gpio.c @@ -13,7 +13,6 @@ * GNU General Public License for more details. */ -#include #include #include #include @@ -27,65 +26,66 @@ */ const struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = { /* AGPIO2, to become event generator */ - { GPIO_2, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_GPI(GPIO_2, PULL_UP), /* SER_TX */ - { GPIO_8, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + PAD_NF(GPIO_8, SerPortTX_OUT, PULL_UP), /* SER RX */ - { GPIO_9, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_NF(GPIO_9, SerPortRX_OUT, PULL_UP), /* EC_IN_RW */ - {GPIO_15, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_GPI(GPIO_15, PULL_UP), /* APU_I2C_3_SCL */ - {GPIO_19, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_NF(GPIO_19, I2C3_SCL, PULL_UP), /* APU_I2C_3_SDA */ - {GPIO_20, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_NF(GPIO_20, I2C3_SDA, PULL_UP), /* AGPIO22 EC_SCI */ - {GPIO_22, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_GPI(GPIO_22, PULL_UP), /* SPI_TPM_CS_L */ - {GPIO_76, Function1, FCH_GPIO_PULL_DOWN_ENABLE | OUTPUT_H }, + PAD_NF(GPIO_76, SPI_TPM_CS_L, PULL_DOWN), /* BD_ID1 */ - {GPIO_135, Function1, INPUT }, + PAD_GPI(GPIO_135, PULL_NONE), /* GPIO_136 - UART_FCH_RX_DEBUG_RX */ - {GPIO_136, Function0, INPUT }, + PAD_NF(GPIO_136, UART0_RXD, PULL_NONE), /* GPIO_138 - UART_FCH_TX_DEBUG_RX */ - {GPIO_138, Function0, INPUT }, + PAD_NF(GPIO_138, UART0_TXD, PULL_NONE), /* TPM_SERIRQ# */ - {GPIO_139, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_GPI(GPIO_139, PULL_UP), /* BD_ID2 */ - {GPIO_140, Function1, INPUT }, + PAD_GPI(GPIO_140, PULL_NONE), /* APU_SPI_WP */ - {GPIO_142, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_GPI(GPIO_142, PULL_UP), /* BD_ID3 */ - {GPIO_144, Function1, INPUT } + PAD_GPI(GPIO_144, PULL_NONE), }; const struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { /* AGPIO 12 */ - { GPIO_12, Function2, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_GPI(GPIO_12, PULL_UP), /* TS_EN_SOC (TouchScreen enable GPIO) */ - {GPIO_13, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H}, + PAD_GPO(GPIO_13, HIGH), /* CAM_PWRON (Camera enable GPIO) */ - {GPIO_14, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + PAD_GPO(GPIO_14, HIGH), + /* APU_BT_ON# */ - {GPIO_24, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + PAD_GPO(GPIO_24, HIGH), /* DEVSLP1_SSD */ - {67, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT }, + PAD_NF(GPIO_67, DEVSLP0, PULL_UP), /* DEVSLP1_EMMC */ /* No Connect for now. @@ -93,13 +93,13 @@ const struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = { */ /* CAM_LED# */ - {GPIO_84, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + PAD_GPO(GPIO_84, HIGH), /* TS_RST# (TouchScreen Reset) */ - {GPIO_85, Function1, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + PAD_GPO(GPIO_85, HIGH), /* WLAN_RST#_AUX */ - {GPIO_119, Function2, FCH_GPIO_PULL_UP_ENABLE | OUTPUT_H }, + PAD_GPO(GPIO_119, HIGH), }; const struct soc_amd_stoneyridge_gpio *variant_early_gpio_table(size_t *size) -- cgit v1.2.3