From 57e37c58639f01b5249628425323f69770606fbf Mon Sep 17 00:00:00 2001 From: Matt DeVillier Date: Fri, 1 May 2020 12:53:31 -0500 Subject: mb/purism/librem_skl: Convert to use override devicetree Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Signed-off-by: Matt DeVillier Change-Id: I3dac62a649e12ea2498d3ecafe03fd0d62af5f2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40911 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- src/mainboard/purism/librem_skl/Kconfig | 4 +- src/mainboard/purism/librem_skl/devicetree.cb | 223 +++++++++++++++++++ .../librem_skl/variants/librem13v2/devicetree.cb | 236 -------------------- .../librem_skl/variants/librem13v2/overridetree.cb | 17 ++ .../librem_skl/variants/librem15v3/devicetree.cb | 243 --------------------- .../librem_skl/variants/librem15v3/overridetree.cb | 27 +++ 6 files changed, 269 insertions(+), 481 deletions(-) create mode 100644 src/mainboard/purism/librem_skl/devicetree.cb delete mode 100644 src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb create mode 100644 src/mainboard/purism/librem_skl/variants/librem13v2/overridetree.cb delete mode 100644 src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb create mode 100644 src/mainboard/purism/librem_skl/variants/librem15v3/overridetree.cb (limited to 'src/mainboard') diff --git a/src/mainboard/purism/librem_skl/Kconfig b/src/mainboard/purism/librem_skl/Kconfig index ca1582a50c..be4c391e60 100644 --- a/src/mainboard/purism/librem_skl/Kconfig +++ b/src/mainboard/purism/librem_skl/Kconfig @@ -39,9 +39,9 @@ config MAINBOARD_DIR string default "purism/librem_skl" -config DEVICETREE +config OVERRIDE_DEVICETREE string - default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb" + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" config MAX_CPUS int diff --git a/src/mainboard/purism/librem_skl/devicetree.cb b/src/mainboard/purism/librem_skl/devicetree.cb new file mode 100644 index 0000000000..854f5db48a --- /dev/null +++ b/src/mainboard/purism/librem_skl/devicetree.cb @@ -0,0 +1,223 @@ +chip soc/intel/skylake + + register "gpu_pp_up_delay_ms" = "200" + register "gpu_pp_down_delay_ms" = " 50" + register "gpu_pp_cycle_delay_ms" = "500" + register "gpu_pp_backlight_on_delay_ms" = " 1" + register "gpu_pp_backlight_off_delay_ms" = "200" + + register "gpu_pch_backlight_pwm_hz" = "200" + + # IGD Displays + register "gfx" = "GMA_STATIC_DISPLAYS(0)" + + register "deep_s3_enable_ac" = "0" + register "deep_s3_enable_dc" = "0" + register "deep_s5_enable_ac" = "0" + register "deep_s5_enable_dc" = "0" + register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" + + register "eist_enable" = "1" + + # Set the Thermal Control Circuit (TCC) activaction value to 95C + # even though FSP integration guide says to set it to 100C for SKL-U + # (offset at 0), because when the TCC activates at 100C, the CPU + # will have already shut itself down from overheating protection. + register "tcc_offset" = "5" # TCC of 95C + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "gpe0_dw0" = "GPP_C" + register "gpe0_dw1" = "GPP_D" + register "gpe0_dw2" = "GPP_E" + + # EC host command ranges are in 0x380-0x383 & 0x80-0x8f + register "gen1_dec" = "0x00000381" + register "gen2_dec" = "0x000c0081" + + # Enable "Intel Speed Shift Technology" + register "speed_shift_enable" = "1" + + # Disable DPTF + register "dptf_enable" = "0" + + # FSP Configuration + register "ProbelessTrace" = "0" + register "EnableLan" = "0" + register "EnableSata" = "1" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "0" + register "SataPortsEnable[2]" = "1" + register "SataPortsDevSlp[0]" = "0" + register "SataPortsDevSlp[2]" = "0" + register "EnableAzalia" = "1" + register "DspEnable" = "0" + register "IoBufferOwnership" = "0" + register "EnableTraceHub" = "0" + register "SsicPortEnable" = "0" + register "SmbusEnable" = "1" + register "Cio2Enable" = "0" + register "ScsEmmcEnabled" = "0" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "0" + register "PttSwitch" = "0" + register "SkipExtGfxScan" = "1" + register "Device4Enable" = "1" + register "HeciEnabled" = "0" + register "SaGv" = "3" + register "PmConfigSlpS3MinAssert" = "2" # 50ms + register "PmConfigSlpS4MinAssert" = "1" # 1s + register "PmConfigSlpSusMinAssert" = "3" # 500ms + register "PmConfigSlpAMinAssert" = "3" # 2s + register "PmTimerDisabled" = "0" + + # EC/KBC requires continuous mode + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + register "pirqa_routing" = "PCH_IRQ11" + register "pirqb_routing" = "PCH_IRQ10" + register "pirqc_routing" = "PCH_IRQ11" + register "pirqd_routing" = "PCH_IRQ11" + register "pirqe_routing" = "PCH_IRQ11" + register "pirqf_routing" = "PCH_IRQ11" + register "pirqg_routing" = "PCH_IRQ11" + register "pirqh_routing" = "PCH_IRQ11" + + # VR Settings Configuration for 4 Domains + #+----------------+-----------+-----------+-------------+----------+ + #| Domain/Setting | SA | IA | GT Unsliced | GT | + #+----------------+-----------+-----------+-------------+----------+ + #| Psi1Threshold | 20A | 20A | 20A | 20A | + #| Psi2Threshold | 4A | 5A | 5A | 5A | + #| Psi3Threshold | 1A | 1A | 1A | 1A | + #| Psi3Enable | 1 | 1 | 1 | 1 | + #| Psi4Enable | 1 | 1 | 1 | 1 | + #| ImonSlope | 0 | 0 | 0 | 0 | + #| ImonOffset | 0 | 0 | 0 | 0 | + #| IccMax | 7A | 34A | 35A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | + #| AC LoadLine | 15 mOhm | 5.7 mOhm | 5.2 mOhm | 5.2 mOhm | + #| DC LoadLine | 14.3 mOhm | 4.83 mOhm | 4.2 mOhm | 4.2 mOhm | + #+----------------+-----------+-----------+-------------+----------+ + register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(4), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(7), + .voltage_limit = 1520, + .ac_loadline = 1500, + .dc_loadline = 1430, + }" + + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(34), + .voltage_limit = 1520, + .ac_loadline = 570, + .dc_loadline = 483, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + .ac_loadline = 520, + .dc_loadline = 420, + }" + + register "domain_vr_config[VR_GT_SLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + .ac_loadline = 520, + .dc_loadline = 420, + }" + + # Enable Root Ports 5 and 9 + register "PcieRpEnable[4]" = "1" + register "PcieRpEnable[8]" = "1" + + # PL2 override 25W + register "tdp_pl2_override" = "25" + + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + # Lock Down + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB xHCI + device pci 14.1 on end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on end # SATA + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1f.0 on + chip ec/purism/librem + device pnp 0c09.0 on end + end + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + end # LPC Interface + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 on end # Intel HDA + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 off end # GbE + end +end diff --git a/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb b/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb deleted file mode 100644 index b15dc2df2e..0000000000 --- a/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb +++ /dev/null @@ -1,236 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "200" - - # IGD Displays - register "gfx" = "GMA_STATIC_DISPLAYS(0)" - - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "0" - register "deep_s5_enable_dc" = "0" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - register "eist_enable" = "1" - - # Set the Thermal Control Circuit (TCC) activaction value to 95C - # even though FSP integration guide says to set it to 100C for SKL-U - # (offset at 0), because when the TCC activates at 100C, the CPU - # will have already shut itself down from overheating protection. - register "tcc_offset" = "5" # TCC of 95C - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_C" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x380-0x383 & 0x80-0x8f - register "gen1_dec" = "0x00000381" - register "gen2_dec" = "0x000c0081" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Disable DPTF - register "dptf_enable" = "0" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "1" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "1" - register "SataPortsEnable[1]" = "0" - register "SataPortsEnable[2]" = "1" - register "SataPortsDevSlp[0]" = "0" - register "SataPortsDevSlp[2]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "0" - register "IoBufferOwnership" = "0" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "0" - register "ScsEmmcHs400Enabled" = "0" - register "ScsSdCardEnabled" = "0" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "3" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "0" - - # EC/KBC requires continuous mode - register "serirq_mode" = "SERIRQ_CONTINUOUS" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #| AC LoadLine | 15 mOhm | 5.7 mOhm | 5.2 mOhm | 5.2 mOhm | - #| DC LoadLine | 14.3 mOhm | 4.83 mOhm | 4.2 mOhm | 4.2 mOhm | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - .ac_loadline = 1500, - .dc_loadline = 1430, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - .ac_loadline = 570, - .dc_loadline = 483, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - .ac_loadline = 520, - .dc_loadline = 420, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - .ac_loadline = 520, - .dc_loadline = 420, - }" - - # Enable Root Ports 5 and 9 - register "PcieRpEnable[4]" = "1" - register "PcieRpEnable[8]" = "1" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port - register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-A Port (right) - register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[3]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[5]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) - register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # SD - - # OC1 should be for Type-C but it seems to not have been wired, according to - # the available schematics, even though it is labeled as USB_OC_TYPEC. - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port (right) - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - - # PL2 override 25W - register "tdp_pl2_override" = "25" - - # Send an extra VR mailbox command for the PS4 exit issue - register "SendVrMbxCmd" = "2" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 on end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 on end # SATA - device pci 1c.0 on end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 off end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 on end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1f.0 on - chip ec/purism/librem - device pnp 0c09.0 on end - end - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/purism/librem_skl/variants/librem13v2/overridetree.cb b/src/mainboard/purism/librem_skl/variants/librem13v2/overridetree.cb new file mode 100644 index 0000000000..18ce220753 --- /dev/null +++ b/src/mainboard/purism/librem_skl/variants/librem13v2/overridetree.cb @@ -0,0 +1,17 @@ +chip soc/intel/skylake + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-A Port (right) + register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[3]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[5]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # SD + + # OC1 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port (right) + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + + device domain 0 on end +end diff --git a/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb b/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb deleted file mode 100644 index ceeeb431a7..0000000000 --- a/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb +++ /dev/null @@ -1,243 +0,0 @@ -chip soc/intel/skylake - - register "gpu_pp_up_delay_ms" = "200" - register "gpu_pp_down_delay_ms" = " 50" - register "gpu_pp_cycle_delay_ms" = "500" - register "gpu_pp_backlight_on_delay_ms" = " 1" - register "gpu_pp_backlight_off_delay_ms" = "200" - - register "gpu_pch_backlight_pwm_hz" = "200" - - # IGD Displays - register "gfx" = "GMA_STATIC_DISPLAYS(0)" - - register "deep_s3_enable_ac" = "0" - register "deep_s3_enable_dc" = "0" - register "deep_s5_enable_ac" = "0" - register "deep_s5_enable_dc" = "0" - register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN" - - register "eist_enable" = "1" - - # Set the Thermal Control Circuit (TCC) activaction value to 95C - # even though FSP integration guide says to set it to 100C for SKL-U - # (offset at 0), because when the TCC activates at 100C, the CPU - # will have already shut itself down from overheating protection. - register "tcc_offset" = "5" # TCC of 95C - - # GPE configuration - # Note that GPE events called out in ASL code rely on this - # route. i.e. If this route changes then the affected GPE - # offset bits also need to be changed. - register "gpe0_dw0" = "GPP_C" - register "gpe0_dw1" = "GPP_D" - register "gpe0_dw2" = "GPP_E" - - # EC host command ranges are in 0x380-0x383 & 0x80-0x8f - register "gen1_dec" = "0x00000381" - register "gen2_dec" = "0x000c0081" - - # Enable "Intel Speed Shift Technology" - register "speed_shift_enable" = "1" - - # Disable DPTF - register "dptf_enable" = "0" - - # FSP Configuration - register "ProbelessTrace" = "0" - register "EnableLan" = "0" - register "EnableSata" = "1" - register "SataSalpSupport" = "0" - register "SataMode" = "0" - register "SataPortsEnable[0]" = "1" - register "SataPortsEnable[1]" = "0" - register "SataPortsEnable[2]" = "1" - register "SataPortsDevSlp[0]" = "0" - register "SataPortsDevSlp[2]" = "0" - register "EnableAzalia" = "1" - register "DspEnable" = "0" - register "IoBufferOwnership" = "0" - register "EnableTraceHub" = "0" - register "SsicPortEnable" = "0" - register "SmbusEnable" = "1" - register "Cio2Enable" = "0" - register "ScsEmmcEnabled" = "0" - register "ScsEmmcHs400Enabled" = "0" - register "ScsSdCardEnabled" = "0" - register "PttSwitch" = "0" - register "SkipExtGfxScan" = "1" - register "Device4Enable" = "1" - register "HeciEnabled" = "0" - register "SaGv" = "3" - register "PmConfigSlpS3MinAssert" = "2" # 50ms - register "PmConfigSlpS4MinAssert" = "1" # 1s - register "PmConfigSlpSusMinAssert" = "3" # 500ms - register "PmConfigSlpAMinAssert" = "3" # 2s - register "PmTimerDisabled" = "0" - - # EC/KBC requires continuous mode - register "serirq_mode" = "SERIRQ_CONTINUOUS" - - register "pirqa_routing" = "PCH_IRQ11" - register "pirqb_routing" = "PCH_IRQ10" - register "pirqc_routing" = "PCH_IRQ11" - register "pirqd_routing" = "PCH_IRQ11" - register "pirqe_routing" = "PCH_IRQ11" - register "pirqf_routing" = "PCH_IRQ11" - register "pirqg_routing" = "PCH_IRQ11" - register "pirqh_routing" = "PCH_IRQ11" - - # VR Settings Configuration for 4 Domains - #+----------------+-----------+-----------+-------------+----------+ - #| Domain/Setting | SA | IA | GT Unsliced | GT | - #+----------------+-----------+-----------+-------------+----------+ - #| Psi1Threshold | 20A | 20A | 20A | 20A | - #| Psi2Threshold | 4A | 5A | 5A | 5A | - #| Psi3Threshold | 1A | 1A | 1A | 1A | - #| Psi3Enable | 1 | 1 | 1 | 1 | - #| Psi4Enable | 1 | 1 | 1 | 1 | - #| ImonSlope | 0 | 0 | 0 | 0 | - #| ImonOffset | 0 | 0 | 0 | 0 | - #| IccMax | 7A | 34A | 35A | 35A | - #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | - #| AC LoadLine | 15 mOhm | 5.7 mOhm | 5.2 mOhm | 5.2 mOhm | - #| DC LoadLine | 14.3 mOhm | 4.83 mOhm | 4.2 mOhm | 4.2 mOhm | - #+----------------+-----------+-----------+-------------+----------+ - register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(4), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(7), - .voltage_limit = 1520, - .ac_loadline = 1500, - .dc_loadline = 1430, - }" - - register "domain_vr_config[VR_IA_CORE]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(34), - .voltage_limit = 1520, - .ac_loadline = 570, - .dc_loadline = 483, - }" - - register "domain_vr_config[VR_GT_UNSLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - .ac_loadline = 520, - .dc_loadline = 420, - }" - - register "domain_vr_config[VR_GT_SLICED]" = "{ - .vr_config_enable = 1, - .psi1threshold = VR_CFG_AMP(20), - .psi2threshold = VR_CFG_AMP(5), - .psi3threshold = VR_CFG_AMP(1), - .psi3enable = 1, - .psi4enable = 1, - .imon_slope = 0x0, - .imon_offset = 0x0, - .icc_max = VR_CFG_AMP(35), - .voltage_limit = 1520, - .ac_loadline = 520, - .dc_loadline = 420, - }" - - # Enable Root Ports 5 and 9 - register "PcieRpEnable[4]" = "1" - register "PcieRpEnable[8]" = "1" - # Enable CLKREQ# for RP9 - register "PcieRpClkReqSupport[8]" = "1" - # SRCCLKREQ2# for NVMe per schematic - register "PcieRpClkReqNumber[8]" = "2" - - register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port - register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) - register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) - register "usb2_ports[3]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) - register "usb2_ports[4]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) - register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth - register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera - register "usb2_ports[7]" = "USB2_PORT_FLEX(OC_SKIP)" # SD - - # OC0 should be for Type-C but it seems to not have been wired, according to - # the available schematics, even though it is labeled as USB_OC_TYPEC. - register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) - register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) - register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port - - # PL2 override 25W - register "tdp_pl2_override" = "25" - - # Send an extra VR mailbox command for the PS4 exit issue - register "SendVrMbxCmd" = "2" - - # Lock Down - register "common_soc_config" = "{ - .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, - }" - - device cpu_cluster 0 on - device lapic 0 on end - end - device domain 0 on - device pci 00.0 on end # Host Bridge - device pci 02.0 on end # Integrated Graphics Device - device pci 14.0 on end # USB xHCI - device pci 14.1 on end # USB xDCI (OTG) - device pci 14.2 on end # Thermal Subsystem - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 off end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT Redirection - device pci 16.4 off end # Management Engine Interface 3 - device pci 17.0 on end # SATA - device pci 1c.0 on end # PCI Express Port 1 - device pci 1c.1 off end # PCI Express Port 2 - device pci 1c.2 off end # PCI Express Port 3 - device pci 1c.3 off end # PCI Express Port 4 - device pci 1c.4 on end # PCI Express Port 5 - device pci 1c.5 off end # PCI Express Port 6 - device pci 1c.6 off end # PCI Express Port 7 - device pci 1c.7 off end # PCI Express Port 8 - device pci 1d.0 on end # PCI Express Port 9 - device pci 1d.1 off end # PCI Express Port 10 - device pci 1d.2 off end # PCI Express Port 11 - device pci 1d.3 off end # PCI Express Port 12 - device pci 1f.0 on - chip ec/purism/librem - device pnp 0c09.0 on end - end - chip drivers/pc80/tpm - device pnp 0c31.0 on end - end - end # LPC Interface - device pci 1f.1 on end # P2SB - device pci 1f.2 on end # Power Management Controller - device pci 1f.3 on end # Intel HDA - device pci 1f.4 on end # SMBus - device pci 1f.5 on end # PCH SPI - device pci 1f.6 off end # GbE - end -end diff --git a/src/mainboard/purism/librem_skl/variants/librem15v3/overridetree.cb b/src/mainboard/purism/librem_skl/variants/librem15v3/overridetree.cb new file mode 100644 index 0000000000..ab46cd3cd1 --- /dev/null +++ b/src/mainboard/purism/librem_skl/variants/librem15v3/overridetree.cb @@ -0,0 +1,27 @@ +chip soc/intel/skylake + + # Enable CLKREQ# for RP9 + register "PcieRpClkReqSupport[8]" = "1" + # SRCCLKREQ2# for NVMe per schematic + register "PcieRpClkReqNumber[8]" = "2" + + register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port + register "usb2_ports[1]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[2]" = "USB2_PORT_MID(OC1)" # Type-A Port (right) + register "usb2_ports[3]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[4]" = "USB2_PORT_FLEX(OC2)" # Type-A Port (left) + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth + register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera + register "usb2_ports[7]" = "USB2_PORT_FLEX(OC_SKIP)" # SD + + # OC0 should be for Type-C but it seems to not have been wired, according to + # the available schematics, even though it is labeled as USB_OC_TYPEC. + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port (right) + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port + + device domain 0 on + device pci 1c.4 on end # PCI Express Port 5 + end +end -- cgit v1.2.3