From 7df50a8b0ead14610134e57b05a81340febd8db8 Mon Sep 17 00:00:00 2001 From: Rudolf Marek Date: Wed, 22 Sep 2010 22:46:47 +0000 Subject: Here is a proposed way how to handle the SATA PHY settings on SB700. It consits of weak function which always exists (with defaults) and a possibility to override this with normal function in main.c. This is the other way of doing that and not using the devictree.cb. Signed-off-by: Rudolf Marek Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5825 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/asrock/939a785gmh/mainboard.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'src/mainboard') diff --git a/src/mainboard/asrock/939a785gmh/mainboard.c b/src/mainboard/asrock/939a785gmh/mainboard.c index 9cebdc2000..09ace66fca 100644 --- a/src/mainboard/asrock/939a785gmh/mainboard.c +++ b/src/mainboard/asrock/939a785gmh/mainboard.c @@ -147,3 +147,25 @@ struct chip_operations mainboard_ops = { CHIP_NAME("Asrock 939A785GMH/128M Mainboard") .enable_dev = mb_enable, }; + +/* override the default SATA PHY setup */ +void sb700_setup_sata_phys(struct device *dev) { + /* RPR7.6.1 Program the PHY Global Control to 0x2C00 */ + pci_write_config16(dev, 0x86, 0x2c00); + + /* RPR7.6.2 SATA GENI PHY ports setting */ + pci_write_config32(dev, 0x88, 0x01B48016); + pci_write_config32(dev, 0x8c, 0x01B48016); + pci_write_config32(dev, 0x90, 0x01B48016); + pci_write_config32(dev, 0x94, 0x01B48016); + pci_write_config32(dev, 0x98, 0x01B48016); + pci_write_config32(dev, 0x9C, 0x01B48016); + + /* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */ + pci_write_config16(dev, 0xA0, 0xA07A); + pci_write_config16(dev, 0xA2, 0xA07A); + pci_write_config16(dev, 0xA4, 0xA07A); + pci_write_config16(dev, 0xA6, 0xA07A); + pci_write_config16(dev, 0xA8, 0xA07A); + pci_write_config16(dev, 0xAA, 0xA0FF); +} -- cgit v1.2.3