From ccf52a92f4f0164f03a56a2052ab7e99c8863ef9 Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Mon, 12 Sep 2005 13:40:10 +0000 Subject: updating to working version from my pre-svn repo. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2017 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/digitallogic/msm586seg/Config.lb | 15 ++- src/mainboard/digitallogic/msm586seg/Options.lb | 10 +- src/mainboard/digitallogic/msm586seg/auto.c | 103 ++++++++++++++++- src/mainboard/digitallogic/msm586seg/irq_tables.c | 46 ++++---- src/mainboard/digitallogic/msm586seg/mainboard.c | 130 ++++++++++++++++++++++ 5 files changed, 273 insertions(+), 31 deletions(-) (limited to 'src/mainboard') diff --git a/src/mainboard/digitallogic/msm586seg/Config.lb b/src/mainboard/digitallogic/msm586seg/Config.lb index 04cc7f2d7b..99f37a7234 100644 --- a/src/mainboard/digitallogic/msm586seg/Config.lb +++ b/src/mainboard/digitallogic/msm586seg/Config.lb @@ -5,7 +5,7 @@ default ROM_SIZE = 512 * 1024 default FALLBACK_SIZE = 0x10000 if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = 64 * 1024 # FALLBACK_SIZE + default ROM_SECTION_SIZE = FALLBACK_SIZE default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) else default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) @@ -108,6 +108,11 @@ if USE_FALLBACK_IMAGE mainboardinit ./failover.inc end + +# VGA console +if CONFIG_CONSOLE_VGA + default CONFIG_PCI_ROM_RUN=1 +end ### ### O.k. We aren't just an intermediary anymore! ### @@ -122,13 +127,19 @@ mainboardinit ./auto.inc ## Include the secondary Configuration files ## dir /pc80 +dir /devices config chip.h chip cpu/amd/sc520 device pci_domain 0 on device pci 0.0 on end - device pci 1.0 on end + + chip drivers/pci/onboard + device pci 14.0 on end # 69000 + register "rom_address" = "0x2000000" + end # register "com1" = "{1}" # register "com1" = "{1, 0, 0x3f8, 4}" end + end diff --git a/src/mainboard/digitallogic/msm586seg/Options.lb b/src/mainboard/digitallogic/msm586seg/Options.lb index 610ef9a791..34a2f1dc68 100644 --- a/src/mainboard/digitallogic/msm586seg/Options.lb +++ b/src/mainboard/digitallogic/msm586seg/Options.lb @@ -7,6 +7,7 @@ uses HAVE_OPTION_TABLE uses USE_OPTION_TABLE uses CONFIG_COMPRESS uses CONFIG_ROM_STREAM +uses CONFIG_USE_INIT uses IRQ_SLOT_COUNT uses MAINBOARD uses MAINBOARD_VENDOR @@ -39,6 +40,13 @@ uses CONFIG_CONSOLE_SERIAL8250 uses DEFAULT_CONSOLE_LOGLEVEL uses MAXIMUM_CONSOLE_LOGLEVEL +# VGA support +uses CONFIG_CONSOLE_VGA +uses CONFIG_LEGACY_VGABIOS +uses VGABIOS_START +uses CONFIG_PCI_ROM_RUN + + default CONFIG_CONSOLE_SERIAL8250=1 default DEFAULT_CONSOLE_LOGLEVEL=9 default MAXIMUM_CONSOLE_LOGLEVEL=9 @@ -68,7 +76,7 @@ default HAVE_HARD_RESET=1 ## Build code to export a programmable irq routing table ## default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=5 +default IRQ_SLOT_COUNT=7 #object irq_tables.o ## diff --git a/src/mainboard/digitallogic/msm586seg/auto.c b/src/mainboard/digitallogic/msm586seg/auto.c index b9f490a4f8..33c1cb9c41 100644 --- a/src/mainboard/digitallogic/msm586seg/auto.c +++ b/src/mainboard/digitallogic/msm586seg/auto.c @@ -65,6 +65,102 @@ static inline void dumpmem(void){ } } + +static inline void irqinit(void){ + volatile unsigned char *cp; +#if 0 +/* these values taken from the msm board itself. + * and they cause the board to not even come out of calibrating_delay_loop + * if you can believe it. Our problem right now is no IDE or serial interrupts + * So we'll try to put interrupts in, one at a time. IDE first. + */ + cp = (volatile unsigned char *) 0xfffefd00; + *cp = 0x11; + cp = (volatile unsigned char *) 0xfffefd02; + *cp = 0x02; + cp = (volatile unsigned char *) 0xfffefd03; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd04; + *cp = 0xf7; + cp = (volatile unsigned char *) 0xfffefd08; + *cp = 0xf7; + cp = (volatile unsigned char *) 0xfffefd0a; + *cp = 0x8b; + cp = (volatile unsigned char *) 0xfffefd10; + *cp = 0x18; + cp = (volatile unsigned char *) 0xfffefd14; + *cp = 0x09; + cp = (volatile unsigned char *) 0xfffefd18; + *cp = 0x88; + cp = (volatile unsigned char *) 0xfffefd1a; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd1b; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd1c; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd20; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd21; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd22; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd28; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd29; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd30; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd31; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd32; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd33; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd40; + *cp = 0x10; + cp = (volatile unsigned char *) 0xfffefd41; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd42; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd43; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd44; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd45; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd46; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd50; + *cp = 0x37; + cp = (volatile unsigned char *) 0xfffefd51; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd52; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd53; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd54; + *cp = 0x37; + cp = (volatile unsigned char *) 0xfffefd55; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd56; + *cp = 0x37; + cp = (volatile unsigned char *) 0xfffefd57; + *cp = 0x00; + cp = (volatile unsigned char *) 0xfffefd58; + *cp = 0xff; + cp = (volatile unsigned char *) 0xfffefd59; + *cp = 0xff; + cp = (volatile unsigned char *) 0xfffefd5a; + *cp = 0xff; +#endif +#if 0 + /* this fails too */ + /* IDE only ... */ + cp = (volatile unsigned char *) 0xfffefd56; + *cp = 0xe; +#endif +} + static void main(unsigned long bist) { volatile int i; @@ -73,6 +169,7 @@ static void main(unsigned long bist) setupsc520(); + irqinit(); uart_init(); console_init(); for(i = 0; i < 100; i++) @@ -123,11 +220,11 @@ static void main(unsigned long bist) // Check 32MB of memory @ 0 ram_check(0x00000000, 0x02000000); #endif -#if 0 +#if 1 { - volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x70000; + volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x60000; volatile unsigned char *dst = (unsigned char *) 0x4000; - for(i = 0; i < 0x10000; i++) { + for(i = 0; i < 0x20000; i++) { /* print_err("Set dst "); print_err_hex32((unsigned long) dst); print_err(" to "); print_err_hex32(*src); print_err("\r\n"); diff --git a/src/mainboard/digitallogic/msm586seg/irq_tables.c b/src/mainboard/digitallogic/msm586seg/irq_tables.c index d24672dcc8..7ee406b07e 100644 --- a/src/mainboard/digitallogic/msm586seg/irq_tables.c +++ b/src/mainboard/digitallogic/msm586seg/irq_tables.c @@ -1,36 +1,32 @@ /* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) - Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up - - Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM + * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up + * + * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ #include const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*5, /* there can be total 5 devices on the bus */ - 0, /* Where the interrupt router lies (bus) */ - 0x88, /* Where the interrupt router lies (dev) */ - 0x1c20, /* IRQs devoted exclusively to PCI usage */ - 0x1106, /* Vendor */ - 0x8231, /* Device */ - 0, /* Crap (miniport) */ + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*7, /* there can be total 7 devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */ + 0, /* IRQs devoted exclusively to PCI usage */ + 0x8086, /* Vendor */ + 0x122e, /* Device */ + 0, /* Crap (miniport) */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0x5e, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ + 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ { - /* 8231 ethernet */ - {0,0x90, {{0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}}, 0x1, 0}, - /* 8231 internal */ - {0,0x88, {{0x2, 0xdeb8}, {0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}}, 0x2, 0}, - /* PCI slot */ - {0,0xa0, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0, 0}, - {0,0x50, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x3, 0}, - {0,0x98, {{0x4, 0xdeb8}, {0x3, 0xdeb8}, {0x2, 0xdeb8}, {0x1, 0xdeb8}}, 0x4, 0}, + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + {0x00,(0x09<<3)|0x0, {{0x30, 0x8e80}, {0x31, 0x8e80}, {0x32, 0x8e80}, {0x33, 0x08e80}}, 0x1, 0x0}, + {0x00,(0x0a<<3)|0x0, {{0x31, 0x8e80}, {0x32, 0x8e80}, {0x33, 0x8e80}, {0x30, 0x08e80}}, 0x2, 0x0}, + {0x00,(0x0b<<3)|0x0, {{0x32, 0x8e80}, {0x33, 0x8e80}, {0x30, 0x8e80}, {0x31, 0x08e80}}, 0x3, 0x0}, + {0x00,(0x0c<<3)|0x0, {{0x33, 0x8e80}, {0x30, 0x8e80}, {0x31, 0x8e80}, {0x32, 0x08e80}}, 0x4, 0x0}, + {0x00,(0x0f<<3)|0x0, {{0x32, 0x8e80}, {0x00, 0x8e80}, {0x00, 0x8e80}, {0x00, 0x08e80}}, 0x0, 0x0}, + {0x00,(0x12<<3)|0x0, {{0x30, 0x8e80}, {0x00, 0x8e80}, {0x00, 0x8e80}, {0x00, 0x08e80}}, 0x0, 0x0}, + {0x00,(0x14<<3)|0x0, {{0x30, 0x8e80}, {0x31, 0x8e80}, {0x32, 0x8e80}, {0x33, 0x08e80}}, 0x0, 0x0}, } }; -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr); -} diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c index 2c64a1393c..55607ac8c0 100644 --- a/src/mainboard/digitallogic/msm586seg/mainboard.c +++ b/src/mainboard/digitallogic/msm586seg/mainboard.c @@ -3,9 +3,139 @@ #include #include #include +#include #include "chip.h" + +static void irqdump() +{ + volatile unsigned char *irq; + void *mmcr; + + + int i; + int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a, + 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c, + 0xd20, 0xd21, 0xd22, 0xd28, 0xd29, + 0xd30, 0xd31, 0xd32, 0xd33, + 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46, + 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a, + -1}; + mmcr = (void *) 0xfffef000; + + printk_err("mmcr is %p\n", mmcr); + for(i = 0; irqlist[i] >= 0; i++) { + irq = mmcr + irqlist[i]; + printk_err("0x%x register @%p is 0x%lx\n", irqlist[i], irq, *irq); + } + +} + +/* TODO: finish up mmcr struct in sc520.h, and; + - set ADDDECTL (now done in raminit.c in cpu/amd/sc520 +*/ +static void enable_dev(struct device *dev) { + volatile struct mmcrpic *pic = MMCRPIC; + volatile struct mmcr *mmcr = MMCRDEFAULT; + + /* msm586seg has this register set to a weird value. + * follow the board, not the manual! + */ + + /* currently, nothing in the device to use, so ignore it. */ + printk_err("digital logic msm586 seg ENTER %s\n", __FUNCTION__); + + + /* from fuctory bios */ + /* NOTE: the following interrupt settings made interrupts work + * for hard drive, and serial, but not for ethernet + */ + /* just do what they say and nobody gets hurt. */ + mmcr->pic.pcicr = 0 ; // M_GINT_MODE | M_S1_MODE | M_S2_MODE; + /* all ints to level */ + mmcr->pic.mpicmode = 0; + mmcr->pic.sl1picmode = 0; + mmcr->pic.sl2picmode = 0x80; + + mmcr->pic.intpinpol = 0; + + mmcr->pic.pit0map = 1; + mmcr->pic.uart1map = 0xc; + mmcr->pic.uart2map = 0xb; + mmcr->pic.rtcmap = 3; + mmcr->pic.ferrmap = 8; + mmcr->pic.gp0imap = 6; + mmcr->pic.gp1imap = 2; + mmcr->pic.gp2imap = 7; + mmcr->pic.gp6imap = 0x15; + mmcr->pic.gp7imap = 0x16; + mmcr->pic.gp10imap = 0x9; + mmcr->pic.gp9imap = 0x4; + + + + + + irqdump(); + printk_err("uart 1 ctl is 0x%x\n", *(unsigned char *) 0xfffefcc0); + + printk_err("0xc20 ctl is 0x%x\n", *(unsigned short *) 0xfffefc20); + printk_err("0xc22 0x%x\n", *(unsigned short *) 0xfffefc22b); + + /* The following block has NOT proven sufficient to get + * the VGA hardware to talk to us + */ + /* let's set some mmcr stuff per the BIOS settings */ + mmcr->dbctl.dbctl = 0x10; + mmcr->sysarb.ctl = 6; + mmcr->sysarb.menb = 0xf; + mmcr->sysarb.prictl = 0xc0000f0f; + /* this is bios setting, depends on sysarb above */ + mmcr->hostbridge.ctl = 0x108; + printk_err("digital logic msm586 seg EXIT %s\n", __FUNCTION__); + + /* pio */ + mmcr->pio.data31_16 = 0xffbf; + + /* pci stuff */ + mmcr->pic.pciintamap = 0xa; + + /* END block where vga hardware still will not talk to us */ + /* all we get from VGA I/O addresses are ffff etc. + */ + mmcr->sysmap.adddecctl = 0x10; + + /* VGA now talks to us, so this adddecctl was the trick. + * still no interrupts from enet. + * Let's try fixing the piodata stuff, as there may be + * some wire there not documented. + */ + mmcr->pio.data31_16 = 0xffbf; + /* also, our sl?picmode needs to match fuctory bios */ + mmcr->pic.sl1picmode = 0x80; + mmcr->pic.sl2picmode = 0x0; + /* and, finally, they do set gp5imap and we don't. + */ + mmcr->pic.gp5imap = 0xd; + /* remaining problem: almost certainly, the irq table is bogus + * NO SHOCK as it came from fuctory bios. + * but let's try these 4 changes for now and see what shakes. + */ + /* still not interrupts. */ + /* their IRQ table is wrong. Just hardwire it */ + { + char pciints[4] = {15, 15, 15, 15}; + pci_assign_irqs(0, 12, pciints); + } + /* the assigned failed but we just noticed -- there is no + * dma mapping, and selftest on e100 requires that dma work + */ + /* follow fuctory here */ + mmcr->dmacontrol.extchanmapa = 0x3210; + +} struct chip_operations mainboard_digitallogic_msm586seg_ops = { CHIP_NAME("Digital Logic MSM586SEG mainboard ") + .enable_dev = enable_dev }; -- cgit v1.2.3